FORIC - Forest as a Resource Industrial Research College

Foric01.jpg
PhD students in FORIC 2018 together with their supervisors.

FORIC (Forest as a resource industrial research college) is our industrial research school. Program manager is Prof. Per Engstrand. Coordinator for the research school is Dr. Olof Björkqvist. Administrative project manager is Katarina Eriksson.

FORIC is financed by the Knowledge Foundation and a part of our research environment Transformative Technologies at Mid Sweden University.

FORIC is a graduate school in close cooperation with companies in Sweden where graduate students will increase their competitiveness. Academia and industry will benefit from interacting with each other. Today biorefineries become an important way to refine forest resources and develop the industry in a sustainable direction. But not even the really big companies can handle themselves of all the processes around the technology used in a biorefinery. Optimizing the chain from forest to finished product therefore requires collaboration between different companies in the forest industry and also other companies close to forest industries, such as logistics, recycling, waste, energy etc.

Research projects in FORIC

FORIC Phase 1 started in 2015 with 14 PhD students. 

FORIC Phase 2 started in 2018 with 11 PhD students. 

  • Shiromini Gamage, Colabitoil
  • Robert Norgren, Ragn-Sells
  • Bakram Guynullin, SenseAir
  • Magnus Hörnsten, Domsjö Fabriker
  • Tommy Nordin, MoRe Research
  • Tove Joelsson, MoRe Research
  • Anna Thorning, Norrskog
  • Malin From, Nouryon
  • Johanna Enström, Skogforsk
  • Sara Starrsjö, SCA
  • Johan Sund, Holmen

Malin From

Robert Norgren

Program directors

Per Engstrand, professor and program director
Olof Björkqvist, coordinator
Katarina Eriksson, administrative project manager

Att vara industridoktorand

Industridoktorander - industriperspektiv

Christer Sandberg Holmen

Hur är det att vara industridoktorand

Mats Rundlöf Konsult Capisco

Research projects in FORIC

Financier

Publications Foric

Articles in journals

Fiskari, J. , Ferritsius, R. , Osong, S. H. , Persson, A. , Höglund, T. , Immerzeel, P. & Norgren, M. (2020). Deep eutectic solvent delignification to low-energy mechanical pulp to produce papermaking fibers. BioResources, vol. 15: 3, pp. 6023-6032.  

Starrsjö, S. , Sevastyanova, O. , Sandström, P. , Fiskari, J. , Boman, M. & Lindström, M. E. (2020). Reduction of adsorbable organically bound halogens (AOX) formation at near-neutral pH chlorine dioxide bleaching of softwood kraft pulp. Holzforschung, vol. 74: 6, pp. 597-604.  

From, M. , Larsson, P. T. , Andreasson, B. , Medronho, B. , Svanedal, I. , Edlund, H. & Norgren, M. (2020). Tuning the properties of regenerated cellulose : Effects of polarity and water solubility of the coagulation medium. Carbohydrate Polymers, vol. 236  

Cordova, A. , Afewerki, S. , Alimohammadzadeh, R. , Sanhueza, I. , Tai, C. , Osong, S. H. , Engstrand, P. & Ibrahem, I. (2019). A sustainable strategy for production and functionalization of nanocelluloses. Pure and Applied Chemistry, vol. 91: 5, pp. 865-874.    

Norgren, R. , Björkqvist, O. & Jonsson, A. (2019). Bio-sludge from the pulp and paper industry as feed for black soldier fly larvae : A study of critical factors for growth and survival. Waste and Biomass Valorization,    

Alimohammadzadeh, R. , Osong, S. H. , Abbaszad Rafi, A. , Dahlström, C. & Cordova, A. (2019). Cellulosic Materials : Sustainable Surface Engineering of Lignocellulose and Cellulose by Synergistic Combination of Metal-Free Catalysis and Polyelectrolyte Complexes. Global Challenges, vol. 3: 7  

From, M. , Andreasson, B. , Svanedal, I. , Larsson, T. , Edlund, H. & Norgren, M. (2019). Influence of regeneration liquid polarity on different material properties of dried cellulose II films. Abstracts of Papers of the American Chemical Society, vol. 257

Alimohammadzadeh, R. , Osong, S. H. , Abbaszad Rafi, A. , Dahlström, C. & Cordova, A. (2019). Sustainable Surface Engineering of Lignocellulose and Cellulose by Synergistic Combination of Metal‐Free Catalysis and Polyelectrolyte Complexes. Global Challenges, vol. 3    

Ferritsius, O. , Ferritsius, R. & Rundlof, M. (2018). Average fibre length as a measure of the amount of long fibres in mechanical pulps - ranking of pulps may shift. Nordic Pulp & Paper Research Journal, vol. 33: 3, pp. 468-481.  

Rahman, H. , Engstrand, P. , Sandström, P. & Sjöstrand, B. (2018). Dewatering properties of low grammage handsheets softwood kraft pulps modified to minimize the need for refining. Nordic Pulp & Paper Research Journal, vol. 33: 3, pp. 397-403.  

Ferritsius, R. , Ferritsius, O. , Hill, J. , Karlström, A. & Eriksson, K. (2018). TMP properties and refiner conditions in a CD82 chip refiner at different operation points. Part II : Comparison of the five tests. Nordic Pulp & Paper Research Journal, vol. 33: 1, pp. 82-94.    

Ferritsius, R. , Ferritsius, O. , Hill, J. , Karlström, A. & Eriksson, K. (2018). TMP properties and refining conditions in a CD82 chip refiner. Part I : Step changes of process variables, description of the tests. Nordic Pulp & Paper Research Journal, vol. 33: 1, pp. 69-81.    

Lundberg, M. , Norgren, M. & Edlund, H. (2018). Validation of crill measurements in a high-yield pulp refining process for improved fines material control. Nordic Pulp & Paper Research Journal, vol. 33: 2, pp. 200-209.  

Zhao, Y. , Moser, C. , Henriksson, G. , Lindström, M. E. & Li, J. (2017). Cellulose Nanofibers from Softwood, Hardwood, and Tunicate: Preparation-Structure-Film Performance Interrelation. ACS Applied Materials and Interfaces, vol. 9: 15, pp. 13508-13519.  

Ferritsius, O. , Ferritsius, R. , Hill, J. , Karlström, A. , Ferritsius, J. & Eriksson, K. (2017). Process considerations and its demands on TMP property measurements - A study on tensile index. Nordic Pulp & Paper Research Journal, vol. 32: 1, pp. 45-53.  

Afewerki, S. , Alimohammadzadeh, R. , Osong, S. H. , Tai, C. , Engstrand, P. & Cordova, A. (2017). Sustainable Design for the Direct Fabrication and Highly Versatile Functionalization of Nanocelluloses. Global Challenges, vol. 1: 7    

Rahman, H. , Lindström, M. E. , Sandström, P. , Salmen, L. & Engstrand, P. (2017). The effect of increased pulp yield using additives in the softwood kraft cook on the physical properties of low-grammage handsheets. Nordic Pulp & Paper Research Journal, vol. 32: 3, pp. 317-323.    

Johansson, J. (2017). Value added decking and cladding products in Sweden : a case study of the current market situation. BioProducts Business, vol. 2: 4, pp. 29-41.    

Hyll, K. , Björk, E. & Vomhoff, H. (2016). Flow imaging characterisation of morphological changes of chemical pulp due to refining. Nordic Pulp & Paper Research Journal, vol. 31: 3, pp. 411-421.

Osong, S. H. , Dahlström, C. , Forsberg, S. , Andres, B. , Engstrand, P. , Norgren, S. & Engström, A. (2016). Nanofibrillated cellulose/nanographite composite films. Cellulose (London), vol. 23: 4, pp. 2487-2500.  

Karlström, A. , Hill, J. , Ferritsius, R. & Ferritsius, O. (2016). Pulp property development Part II : Process non-linearities and their influence on pulp property development. Nordic Pulp & Paper Research Journal, vol. 31: 2, pp. 287-299.

Karlström, A. , Hill, J. , Ferritsius, O. & Ferritsius, R. (2016). Pulp property development Part III : Fiber residence time and consistency profile impact on specific energy and pulp properties. Nordic Pulp & Paper Research Journal, vol. 31: 2, pp. 300-307.

Osong, S. H. , Norgren, S. , Engstrand, P. , Lundberg, M. , Reza, M. & Tapani, V. (2016). Qualitative evaluation of microfibrillated cellulose usingthe crill method and some aspects of microscopy. Cellulose (London), vol. 23: 6, pp. 3611-3624.    

Moser, C. , Henriksson, G. & Lindström, M. E. (2016). Specific Surface Area Increase during Cellulose Nanofiber Manufacturing Related to Energy Input. BioResources, vol. 11: 3, pp. 7124-7132.  

Reyier Österling, S. , Ferritsius, O. , Ferritsius, R. , Johansson, C. & Stångmyr, J. (2016). Weighted averages and distributions of fibre characteristics of mechanical pulps – Part II: Distributions of measured and predicted fibre characteristics by using raw data from an optical fibre analyser. Appita journal, vol. 69: 1, pp. 64-73.

Karlström, A. , Hill, J. , Ferritsius, R. & Ferritsius, O. (2015). Pulp property development Part I: Interlacing under-sampled pulp properties and TMP process data using piece-wise linear functions. Nordic Pulp & Paper Research Journal, vol. 30: 4, pp. 599-608.    

Moser, C. , Lindström, M. E. & Henriksson, G. (2015). Toward Industrially Feasible Methods for Following the Process of Manufacturing Cellulose Nanofibers. BioResources, vol. 10: 2, pp. 2360-2375.    

Reyier Österling, S. , Ferritsius, O. , Ferritsius, R. & Stångmyr, J. (2015). Weighted averages and distributions of fibre characteristics of mechanical pulps Part I : Various methods of weighting data from an optical analyser can give averages that rank pulps differently. Appita journal, vol. 68: 4, pp. 357-368.

Osong, S. H. , Norgren, S. , Engstrand, P. , Lundberg, M. & Hansen, P. (2014). Crill : A novel technique to characterize nano-ligno-cellulose. Nordic Pulp & Paper Research Journal, vol. 29: 2, pp. 190-194.  

Osong, S. H. , Norgren, S. & Engstrand, P. (2014). Paper strength improvement by inclusion of nano-ligno-cellulose to Chemi-thermomechanical pulp. Nordic Pulp & Paper Research Journal, vol. 29: 2, pp. 309-316.  

Osong, S. H. , Norgren, S. & Engstrand, P. (2013). An approach to produce nano-ligno-cellulose from mechanical pulp fine materials. Nordic Pulp & Paper Research Journal, vol. 28: 4, pp. 472-479.      

Zhu, H. , Helander, M. , Moser, C. , Ståhlkrantz, A. , Söderberg, D. , Henriksson, G. & Lindström, M. (2012). A Novel Nano Cellulose Preparation Method and Size Fraction by Cross Flow Ultra-Filtration. Current organic chemistry, vol. 16: 16, pp. 1871-1875.

Ferritsius, R. , Reyier Österling, S. & Ferritsius, O. (2012). Development of TMP fibers in LC- and HC-refining. Nordic Pulp & Paper Research Journal, vol. 27: 5, pp. 860-871.  

Reyier Österling, S. , Ferritsius, O. & Ferritsius, R. (2012). The influence of fiber dimensions on mechanical pulp long fiber tensile index and density. Nordic Pulp & Paper Research Journal, vol. 27: 5, pp. 844-859.    

Hague, E. , Islam, N. , Rahman, H. & Uddin Mohamad, A. (2008). Antimicrobial and Cytotoxic Activities of the Crude Extracts and Isolated Compounds of Xylocarpus mollucensis. Dhaka University Journal of Pharmaceutical Sciences, vol. 6: 2, pp. 109-112.    

Haque, E. , Uddin Shekhar, H. , Uddin Mohamad, A. , Rahman, H. , Islam, M. & Hossain, S. (2006). Triterpenoids from the Stem Bark of Avicennia officinalis. Dhaka University Journal of Pharmaceutical Sciences, vol. 5: 1-2, pp. 53-57.    

Gaynullin, B. , Hummelgård, C. , Mattsson, C. , Rödjegård, H. & Thungström, G. (). Efficient pressure compensation of low-cost NDIR sensors for environmental studies. ,

Johansson, J. , Strandberg, C. & Olsson, L. (). Swedish consumers’ of durable wood materials – value, knowledge and satisfaction. ,

Articles, reviews/surveys

Osong, S. H. , Norgren, S. & Engstrand, P. (2016). Processing of wood-based microfibrillated cellulose and nanofibrillated cellulose, and applications relating to papermaking: a review. Cellulose (London), vol. 23: 1, pp. 93-123.  

Larsson, M. , Stendahl, M. & Roos, A. (2016). Supply chain management in the Swedish wood products industry – a need analysis.. Scandinavian Journal of Forest Research, vol. 31: 8, pp. 777-787.  

Larsson, M. (). Business relations, coordination and ordering between roundwood supply units and sawmills – four Swedish cases. ,

Conference papers

Ferritsius, O. , Ferritsius, R. , Ferritsius, J. & Rundlöf, M. (2019). Heterogeneity. In Heterogeneity.

Rahman, H. , An, S. , Norlin, B. , Fröjdh, C. , Persson, E. & Engstrand, P. (2019). Maximized wood chip impregnation efficiency validated by new miniaturized X-ray fluorescence techniques. Paper presented at the 11th Fundamental Mechanical Pulp Research Seminar, Norrköping, Sweden, April 2-4, 2019  

Rahman, H. & Engstrand, P. (2019). Modification of Softwood Kraft Pulp for Improved Tissue Paper. In TAPPI PaperCon Conference, Indianapolis, USA, May 5-8, 2019.

Rahman, H. (2019). Modification of softwood kraft pulp requiring less energy in tissue paper production. Paper presented at the Tissue World Milan Conference, Milan, Italy, March 25-27, 2019

Lundberg, M. , Norgren, M. & Edlund, H. (2018). Crill Measurements For Improved Fines Material Control. In IMPC 2018. Trondheim, Norway :

Fiskari, J. , Ferritsius, R. , Osong, S. H. , Persson, A. , Höglund, T. & Norgren, M. (2018). Deep Eutectic Solvent Treatment to Low-Energy TMP to Produce Fibers for Papermaking. In IMPC 2018. Trondheim, Norway :

Björk, E. , Bouveng, M. & Vomhoff, H. (2018). Fines-enriched pulp as a strength agent in a CTMP middle ply. In PaperCon 2018 : Shaping the future through innovation.

Nordin, T. , Svedberg, A. , Norgren, S. , Pettersson, G. & Engstrand, P. (2018). Industrially Relevant In-situ Production Of High Yield Pulp Based Nanocellulose Materials Optimized To Improve Strength In Packaging And Printing Papers : A Comparison Between CMC And MFC As The Anionic Component In Layer-by-Layer Technology. In IMPC 2018. Trondheim, Norway :

Björk, E. , Bouveng, M. & Vomhoff, H. (2018). Production of pulps with an extremely high fines content for use as strength agent. In PaperCon 2018 : Shaping the future through innovation.

Alimohammadzadeh, R. , Osong, S. H. , Dahlström, C. & Cordova, A. (2018). Scalable Improvement of the Strength Properties of Chemimechanical Pulp Fibers by Eco-Friendly Catalysis. In IMPC 2018. Trondheim, Norway :

Ferritsius, O. , Ferritsius, R. , Rundlöf, M. , Engberg, B. A. & Engstrand, P. (2018). The Independent State of Fibres in Relation to the Mechanical Pulping World. In IMPC 2018. Trondheim, Norway :

Hedlund, A. , Stengard, A. & Björkqvist, O. (2017). A simulation-based method for evaluation of energy system cooperation between pulp and paper mills and a district heating system : A case study. In 19 World academy of science, engineering and technology conference proceedings.. pp. 1158--1164.

Sandberg, C. , Ferritsius, O. & Ferritsius, R. (2017). Energy efficiency in mechanical pulping. Paper presented at the 10th Fundamental Mechanical Pulping Research Seminar, Jyväskylä, Finland, 13–14 of June, 2017

Gaynullin, B. , Bryzgalov, M. , Hummelgård, C. , Mattsson, C. , Rödjegård, H. & Thungström, G. (2017). Pressure characterization and resolution limits' investigation of high accuracy NDIR Methane sensor for environmental applications. Paper presented at the 14th International Workshop on Advanced Infrared Technology and Applications, AITA 2017, Québec City, Canada, September 27-29, 2017

Björk, E. , Vomhoff, H. & Lindgren, M. (2017). Single-stage hydrocyclone fractionation of refined bleached softwood pulp. In Paper Conference and Trade Show, PaperCon 2017 : Renew, Rethink, Redefine the Future.. pp. 878--905.

Björk, E. , Vomhoff, H. & Bouveng, M. (2017). Usage of Fines-Enriched Pulp to Increase Strength in CTMP. In Paper Conference and Trade Show, PaperCon 2017 : Renew, Rethink, Redefine the Future.. pp. 1607--1631.

Moser, C. (2017). Xyloglucan Adsorption as a Method to Measure Surface Area for Never Dried Cellulose Nanofibers. Paper presented at the 2017 Nanotechnology for Renewable Materials Conference, Montreal, Quebec, Canada, 5-8 June, 2017

Gaynullin, B. , Bryzgalov, M. , Hummelgård, C. & Rödjegard, H. (2016). A practical solution for accurate studies of NDIR gas sensor pressure dependence. Lab test bench, software and calculation algorithm. In 2016 IEEE SENSORS. Orlando, FL, USA :  

Johansson, O. , Fernando, D. , Fenitsius, R. , Daniel, G. & Ferritsius, O. (2016). Advancements in optical analysis yields new insight to mechanical pulping processes in an efficient and inexpensive way. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 267--276.

Eriksson, K. , Ferritsius, R. , Ferritsius, O. & Hill, J. (2016). Benefits from improved stability in process conditions and pulp properties-a double disc refiner case study. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 317--327.

Ferritsius, R. , Sandberg, C. , Ferritsius, O. , Rundlöf, M. , Daniel, G. , Mörseburg, K. & Fernando, D. (2016). Development of Fiber Properties in Full Scale HC and LC Refining. In TAPPI conference proceedings.

Larsson, M. (2016). Mapping of sawmill supply chains. Paper presented at the IUFRO Conference, 12-17 June, 2016, Quebec, Canada

Osong, S. H. , Norgren, S. , Pettersson, G. , Engstrand, P. , Còrdova, A. , Afewerki, S. & Alimohammadzadeh, R. (2016). Processing of nanocellulose and applications relating to CTMP-based paperboard and foams. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 87--93.

Eriksson, K. , Ferritsius, J. , Ferritsius, O. , Ferritsius, R. , Hill, J. , Karlstrorrp, A. & Merseburg, K. (2016). Proper pulp sampling pre-requisite to any pulp property assessment. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 1--11.

Norgren, R. , Fröling, M. & Björkqvist, O. (2016). Pulp mill bio-sludge - sludge properties and recycling. In Proceedings of 5th International Conference on Industrial & Hazardous Waste Management, September 27th-30th, 2016, Chania, Kreta..    

Ferritsius, O. , Ferritsius, R. , Hill, J. , Eriksson, K. , Mörseburg, K. & Ferritsius, J. (2016). Untaught experiences regarding common practice and standards for sampling, characterization, control, and Design of TMP and CTMP operations. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 12--17.

Gaynullin, B. , Hummelgård, C. , Mattsson, C. , Rödjegård, H. & Thungström, G. (2015). Comparative study of CO2 and CH4 pressure dependence in the HPP NDIR platform. Paper presented at the 2015th FPIRC International Summer Conference

Henshaw Osong, S. , Dahlström, C. , Forsberg, S. , Andres, B. , Engstrand, P. , Norgren, S. , Olin, H. & Engström, A. (2015). Development of CTMP-based nanofibrillated Cellulose /nanographite composites for paper applications. Paper presented at the 9th International Fundamental Mechanical Pulp Research Seminar, 19-20May, Trondheim, Norway

Osong, S. H. (2015). Development of nanofibrillated cellulose/nanographite composites for paper applications. In TAPPI International Conference on Nanotechnology for Renewable Materials 2015.. pp. 35--55.

Osong, S. H. (2015). Development of nanofibrillated cellulose/nanographite composites for paper applications. In Cellulose Materials Doctoral Students Summer Conference 2015. Aalto University, Finland : (Aalto University publication series SCIENCE + TECHNOLOGY)

Moser, C. (2015). Energy efficiency for cellulose nanfiber (CNF) production. In Cellulose Materials Doctoral Students Summer Conference 2015. (Aalto University publication series SCIENCE + TECHNOLOGY)

Gaynullin, B. (2015). Implementation of low cost methane sensing IR-technology in bio refinery industry. Paper presented at the Cellulose materials doctoral students summer conference 2015, Autrans, France, August 26-28, 2015

Norgren, R. , Fröling, M. & Björkqvist, O. (2015). Industrial Symbiosis solutions for recycling of biosludge from the pulp industry. In Proceedings of Global Cleaner Production & Sustainable Consumption Conference  1 - 4 November 2015, Sitges, Barcelona, Spain.  

Larsson, M. (2015). Mapping of Wood Supply Chains : a Case Study. Paper presented at the SWST 2015 International Convention: Renewable Materials and the Bio-Economy, Jackson WY, USA, June 7-12, 2015

Rahman, H. (2015). Modify or optimize the Kraft pulping process to produce more refining energy efficient fibers at the final functional product properties of Tissue Papers. In Cellulose Materials Doctoral Students Summer Conference 2015. Aalto University, Finland : (Aalto University publication series SCIENCE + TECHNOLOGY)

Hill, J. , Karlström, A. , Ferritsius, R. & Ferritsius, O. (2015). Pulp property development – inside the gap perspective. Paper presented at the 9th International Fundamental Mechanical Pulp Research Seminar, Trondheim, Norway, May 19-20, 2015

Eriksson, K. , Karlström, A. , Ferritsius, R. , Ferritsius, O. & Hill, J. (2015). Recent advances in modelling and control of TMP refining processes. Paper presented at the 9th International Fundamental Mechanical Pulp Research Seminar, Trondheim, Norway, 19-20 May, 2015

Ferritsius, O. , Ferritsius, R. , Hill, J. & Ferritsius, J. (2015). Some insights regarding standards and common practice. Paper presented at the 9th International Fundamental Mechanical Pulp Research Seminar, 19-20 May, Trondheim, Norway, 2015

Ferritsius, O. , Mörseburg, K. & Ferritsius, R. (2014). Bat of CTMP and TMP plants with respect to quality development and energy efficiency. In International Mechanical Pulping Conference, IMPC 2014.

Karlström, A. , Hill, J. , Ferritsius, O. , Ferritsius, R. & Engstrand, P. (2014). Can we increase the proportion of electrical energy into fibre development in existing HC-refiners?. In International Mechanical Pulping Conference, IMPC 2014.

Osong, S. H. , Norgren, S. , Engstrand, P. , Lundberg, M. & Hansen, P. (2014). Development of nano-ligno-cellulose produced from mechanical pulp. In International Mechanical Pulping Conference, IMPC 2014.

Ferritsius, R. , Sandberg, C. & Ferritsius, O. (2014). LC-refining of mechanical pulps and its influence on fiber curl and handsheet strength properties. In International Mechanical Pulping Conference, IMPC 2014.

Ferritsius, R. , Hill, J. , Ferritsius, O. & Karlstrom, A. (2014). On energy efficiency in chip refining. In International Mechanical Pulping Conference, IMPC 2014.

Osong, S. H. , Norgren, S. & Engstrand, P. (2014). Recent developments in nano-ligno-cellulose production and the crill characterization technique. In TAPPI International Conference on Nanotechnology for Renewable Materials 2014.. pp. 193--205.

Osong, S. H. , Engstrand, P. & Norgren, S. (2013). Mechanical Properties of high-yield pulp handsheets, as affected by blends of Nano-ligno-cellulose. Paper presented at the 2013 TAPPI International Conference on Nanotechnology for Renewable Materials, Stockholm, Sweden , 24-27 June 2013.

Osong, S. H. , Norgren, S. & Engstrand, P. (2013). Nano-ligno-cellulose as strength enhancer in handsheets. Paper presented at the Marcus Wallenberg Prize (MWP 2013) - Young Researchers' Programme, Stockhom , Sweden, 23-24 Sept 2013.

Osong, S. H. , Norgren, S. & Engstrand, P. (2013). Nano-ligno-cellulose from mechanical pulp fines. Paper presented at the European Forest Products Doctoral Symposium 2013

Osong, S. H. , Engstrand, P. & Norgren, S. (2013). New Products based on Mechanical Pulps : Nano-ligno-cellulose (NLC). Paper presented at the 8th International Fundamental Mechanical Pulp Research Seminar, Åre, Sweden, 29-31 Jan, 2013.

Osong, S. H. , Engstrand, P. & Norgren, S. (2012). A New Concept to Produce Nano-ligno-cellulose Materials by Means of High Pressure Homogenization. Paper presented at the 3rd International Cellulose Conference (ICC 2012), Oct 10-12, Sapporo, Japan.

Enberg, S. , Paulsson, M. , Rundlöf, M. , Johnsen, I. A. & Axelsson, P. (2009). The influence of process conditions during pulp storage on the optical properties of Norway spruce high-yield pulps. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 117--121.

Ferritsius, O. & Rautio, M. (2007). Differences on fibre level between GW and TMP for magazine grades. In International Mechanical Pulping Conference 2007, TAPPI.. pp. 87--96.

Reyier, S. , Ferritsius, O. & Shagaev, O. (2007). Ways to measure the bonding ability distribution of fibers in mechanical pulps. In International Mechanical Pulping Conference 2007, TAPPI.. pp. 97--111.

Doctoral theses, comprehensive summaries

Osong, S. H. (2016). Mechanical Pulp-Based Nanocellulose : Processing and applications relating to paper and paperboard, composite films, and foams. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2016 (Mid Sweden University doctoral thesis : 245)  

Licentiate theses, comprehensive summaries

Gaynullin, B. (2019). High accuracy low-cost NDIR sensing. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2019 (Mid Sweden University licentiate thesis : 160)

Rahman, H. (2018). Modifying kraft pulping to produce a softwood pulp requiring less energy in tissue paper production. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2018 (Mid Sweden University licentiate thesis : 137)  

Johansson, J. (2017). The Swedish durable wood materials market – industry structure and consumer perceptions’. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2017 (Mid Sweden University licentiate thesis : 132)

Osong, S. H. (2014). Mechanical Pulp Based Nano-ligno-cellulose : Production, Characterisation and their Effect on Paper Properties. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2014 (Mid Sweden University licentiate thesis : 109)  

Other

Rahman, H. (2020). Measurement of S and Na distribution in impregnated wood chips/ fibers by X-ray fluorescence ( XRF) to improve process efficiency of Pulp& paper Industry : Treesearch Progress 2020-Online Edition 23-24 September.

Rahman, H. (2018). Modification of Softwood Kraft Pulp is Better for Tissue Paper (Bangladesh Pulp and Paper).  

Reports

Engstrand, P. O. , Ferritsius, O. , Björkqvist, O. , Johansson, L. , Johansson, Ö. , Daniel, G. , Ferritsius, R. , Karlström, A. & et al. (2015). Mekmassainitiativet för energieffektivitet, e2mp-i. Sundsvall : Mittuniversitetet (Rapportserie FSCN 2015:58).