Publications

Articles in journals

Aranda, J. J. L. , Bader, S. & Oelmann, B. (2019). A space-coiling resonator for improved energy harvesting in fluid power systems. Sensors and Actuators A-Physical, vol. 291, pp. 58-67.  

Zhang, W. , Yang, D. , Wang, H. , Huang, X. & Gidlund, M. (2019). CarNet : A Dual Correlation Method for Health Perception of Rotating Machinery. IEEE Sensors Journal, vol. 19: 16, pp. 7095-7106.  

Xu, Y. , Bader, S. & Oelmann, B. (2019). Design, modeling and optimization of an m-shaped variable reluctance energy harvester for rotating applications. Energy Conversion and Management, vol. 195, pp. 1280-1294.  

Pau, G. , Ferrero, R. , Jennehag, U. & Zhang, H. (2019). Emerging applications through low-power wireless technologies for Internet of Things. International Journal of Distributed Sensor Networks, vol. 15: 3    

Rydblom, S. , Thörnberg, B. & Olsson, E. (2019). Field Study of LWC and MVD Using the Droplet Imaging Instrument. IEEE Transactions on Instrumentation and Measurement, vol. 68: 2, pp. 614-622.  

Eldefrawy, M. , Butun, I. , Pereira, N. & Gidlund, M. (2019). Formal security analysis of LoRaWAN. Computer Networks, vol. 148, pp. 328-339.    

Eldefrawy, M. , Pereira, N. & Gidlund, M. (2019). Key Distribution Protocol for Industrial Internet of Things without Implicit Certificates. IEEE Internet of Things Journal, vol. 6: 1, pp. 906-917.  

Krug, S. & O'Nils, M. (2019). Modeling and Comparison of Delay and Energy Cost of IoT Data Transfers. IEEE Access, vol. 7, pp. 58654-58675.    

Bader, S. , Ma, X. & Oelmann, B. (2019). One-diode photovoltaic model parameters at indoor illumination levels – A comparison. Solar Energy, vol. 180, pp. 707-716.  

Farag, H. , Sisinni, E. , Gidlund, M. & Österberg, P. (2019). Priority-Aware Wireless Fieldbus Protocol for Mixed-Criticality Industrial Wireless Sensor Networks. IEEE Sensors Journal, vol. 19: 7, pp. 2767-2780.  

Grimaldi, S. , Mahmood, A. & Gidlund, M. (2019). Real-time Interference Identification via Supervised Learning : Embedding Coexistence Awareness in IoT Devices. IEEE Access, vol. 7, pp. 835-850.    

Mahmood, A. , Sisinni, E. , Guntupalli, L. , Rondón, R. , Hassan, S. A. & Gidlund, M. (2019). Scalability Analysis of a LoRa Network under Imperfect Orthogonality. IEEE Transactions on Industrial Informatics, vol. 15: 3, pp. 1425-1436.  

Ahmad, J. , Andersson, H. & Sidén, J. (2019). Screen Printed Piezoresistive Sensors for Monitoring Pressure Distribution in Wheelchair. IEEE Sensors Journal, vol. 19: 6, pp. 2055-2063.  

Butun, I. , Pereira, N. & Gidlund, M. (2019). Security Risk Analysis of LoRaWAN and Future Directions. Future Internet, vol. 11: 1    

Farag, H. , Gidlund, M. & Österberg, P. (2018). A Delay-Bounded MAC Protocol for Mission- and Time-Critical Applications in Industrial Wireless Sensor Networks. IEEE Sensors Journal, vol. 18: 6, pp. 2607-2616.  

Xu, Y. , Bader, S. & Oelmann, B. (2018). A Survey on Variable Reluctance Energy Harvesters in Low-Speed Rotating Applications. IEEE Sensors Journal, vol. 18: 8, pp. 3426-3435.  

Aranda, J. J. L. , Bader, S. & Oelmann, B. (2018). An Apparatus For The Performance Estimation Of Pressure Fluctuation Energy Harvesters. IEEE Transactions on Instrumentation and Measurement, vol. 67: 11, pp. 2705-2713.  

Guntupalli, L. , Gidlund, M. & Li, F. Y. (2018). An On-Demand Energy Requesting Scheme for Wireless Energy Harvesting Powered IoT Networks. IEEE Internet of Things Journal, vol. 5: 4, pp. 2868-2879.  

Aurangzeb, K. , Alhussein, M. & O'Nils, M. (2018). Analysis of Binary Image Coding Methods for Outdoor Applications of Wireless Vision sensor Networks. IEEE Access, vol. 6, pp. 16932-16941.    

Lavassani, M. , Forsström, S. , Jennehag, U. & Zhang, T. (2018). Combining Fog Computing with Sensor Mote Machine Learning for Industrial IoT. Sensors, vol. 18: 5    

Aurangzeb, K. , Alhussein, M. & O'Nils, M. (2018). Data Reduction Using Change Coding for Remote Applications of wireless Visual Sensor Networks. IEEE Access, vol. 6, pp. 37738-37747.    

Guntupalli, L. , Ghose, D. , Li, F. & Gidlund, M. (2018). Energy Efficient Consecutive Packet Transmissions in Receiver-initiated Wake-up Radio Enabled WSNs. IEEE Sensors Journal, vol. 18: 11, pp. 4733-4745.  

Guntupalli, L. & Gidlund, M. (2018). Multiple Packet Transmissions in Duty Cycling WSNs : A DTMC Based Throughput Analysis. IEEE Wireless Communications Letters, vol. 7: 3, pp. 480-483.  

Szewczyk, R. & Cheng, P. (2018). Open Source Implementation of Different Variants of Jiles-Atherton Model of Magnetic Hysteresis Loops. Acta Physica Polonica. A, vol. 133: 3, pp. 654-656.    

Yang, D. , Ma, J. , Xu, Y. & Gidlund, M. (2018). Safe-WirelessHART: A Novel Framework Enabling Safety-Critical Applications Over Industrial WSNs. IEEE Transactions on Industrial Informatics, vol. 14: 8, pp. 3513-3523.  

Kristiansen, L. (2018). Wanting a Life in Decency! : A Qualitative Study from Experienced Electric Wheelchairs Users’ perspective. Open Journal of Nursing, vol. 8: 7, pp. 419-433.    

Ma, J. , Yang, D. , Zhang, H. & Gidlund, M. (2017). A Reliable Handoff Mechanism for Mobile Industrial Wireless Sensor Networks. Sensors, vol. 17: 8    

Grimaldi, S. , Mahmood, A. & Gidlund, M. (2017). An SVM-Based Method for Classification of External Interference in Industrial Wireless Sensor and Actuator Networks. Journal of Sensor and Actuator Network, vol. 6: 2    

Ma, X. , Bader, S. & Oelmann, B. (2017). Characterization of Indoor Light Conditions by Light Source Classification. IEEE Sensors Journal, vol. 17: 12, pp. 3884-3891.  

Rondón, R. , Gidlund, M. & Landernäs, K. (2017). Evaluating Bluetooth Low Energy Suitability for Time-Critical Industrial IoT Applications. International Journal of Wireless Information Networks, vol. 24: 3, pp. 278-290.    

Lo Bello, L. , Åkerberg, J. , Gidlund, M. & Uhlemann, E. (2017). Guest Editorial Special Section on New Perspectives on Wireless Communications in Automation: From Industrial Monitoring and Control to Cyber-Physical Systems. IEEE Transactions on Industrial Informatics, vol. 13: 3, pp. 1393-1397.    

Yu, K. , Gidlund, M. , Åkerberg, J. & Björkman, M. (2017). Performance Evaluations and Measurements of the REALFLOW Routing Protocol in Wireless Industrial Networks. IEEE Transactions on Industrial Informatics, vol. 13: 3, pp. 1410-1420.    

Cheng, P. , Nazar Ul Islam, M. & Oelmann, B. (2017). Torque Sensor Based on Differential Air Pressure Using Volumetric Strain. IEEE Sensors Journal, vol. 17: 11, pp. 3269-3277.  

Chapters in books

Butun, I. & Österberg, P. (2019). Detecting Intrusions in Cyber-Physical Systems of Smart Cities : Challenges and Directions. In Secure Cyber-Physical Systems for Smart Cities. Hershey, USA : IGI Global. pp. 74-102.  

Barac, F. , Gidlund, M. , Zhang, T. & Sisinni, E. (2017). Error Manifestation in Industrial WSN Communication and Guidelines for Countermeasures. In Wireless Sensor Systems for Extreme Environments : Space, Underwater, Underground and Industrial. John Wiley & Sons.

Conference papers

Haller, S. , Cheng, P. & Oelmann, B. (2019). A 2.5 v 600 a mosfet-based DC traction motor. In Proceedings of the IEEE International Conference on Industrial Technology.. pp. 213--218.  

Krug, S. , Shallari, I. & O'Nils, M. (2019). A Case Study on Energy Overhead of Different IoT Network Stacks. In 2019 IEEE 5th World Forum on Internet of Things (WF-IoT).. pp. 528--529.  

Aydogan, E. , Yilmaz, S. , Sen, S. , Butun, I. , Forsström, S. & Gidlund, M. (2019). A Central Intrusion Detection System for RPL-Based Industrial Internet of Things. In 2019 15th IEEE International Workshop on Factory Communication Systems (WFCS).  

Ahmad, J. , Li, X. , Sidén, J. & Andersson, H. (2019). An Analysis of Screen-Printed Stretchable Conductive Tracks on Thermoplastic Polyurethane. In FLEPS 2019 - IEEE International Conference on Flexible and Printable Sensors and Systems, Proceedings.    

Forsström, S. & Jennehag, U. (2019). An Implemented Open Source Blockchain Market for Smart Grids and Microgrids Using Autonomous Agents. In COINS '19 Proceedings of the International Conference on Omni-Layer Intelligent Systems.. pp. 116--121.  

Lindén, J. , Wang, X. , Forsström, S. & Zhang, T. (2019). Bilingual Auto-Categorization Comparison of two LSTM Text Classifiers. In 2019 8th International Congress on Advanced Applied Informatics (IIAI-AAI).  

Carratu, M. , Liguori, C. , Pietrosanto, A. , O'Nils, M. & Lundgren, J. (2019). Data Fusion for Timber Bundle Volume Measurement. Paper presented at the 2019 IEEE International Instrumentation & Measurement Technology Conference, Auckland, New Zealand, May 20-23, 2019

Farag, H. , Gidlund, M. & Österberg, P. (2019). DeP-D : A Decentralized Primal-Dual Optimization Algorithm for Industrial Wireless Sensor Networks. In 2019 15th IEEE International Workshop on Factory Communication Systems (WFCS).  

Eldefrawy, M. , Ferrari, N. & Gidlund, M. (2019). Dynamic User Authentication Protocol for Industrial IoT without Timestamping. In 2019 15th IEEE International Workshop on Factory Communication Systems (WFCS).  

Xu, Y. , Bader, S. , Magno, M. , Mayer, P. & Oelmann, B. (2019). Energy-autonomous On-rotor RPM Sensor Using Variable Reluctance Energy Harvesting. In 2019 IEEE 8th International Workshop on Advances in Sensors and Interfaces (IWASI).. pp. 175--180.  

Vilar, C. , Thörnberg, B. & Krug, S. (2019). Evaluation of embedded camera systems for autonomous wheelchairs. In VEHITS 2019 - Proceedings of the 5th International Conference on Vehicle Technology and Intelligent Transport Systems.. pp. 76--85.

Taami, T. , Krug, S. & O'Nils, M. (2019). Experimental Characterization of Latency in Distributed IoT Systems with Cloud Fog Offloading. In IEEE International Workshop on Factory Communication Systems - Proceedings, WFCS.  

Gebremichael, T. , Jennehag, U. & Gidlund, M. (2019). Lightweight IoT Group Key Establishment Scheme from the One Time Pad. In 2019 7th IEEE International Conference on Mobile Cloud Computing, Services, and Engineering (MobileCloud).  

Butun, I. & Gidlund, M. (2019). Location Privacy Assured Internet of Things. In Proceedings of the 5th International Conference on Information Systems Security and Privacy. Setúbal, Portugal : . pp. 623--630.  

Butun, I. , Österberg, P. & Gidlund, M. (2019). Preserving location privacy in cyber-physical systems. In 2019 IEEE Conference on Communications and Network Security (CNS).. pp. 1--6.  

Butun, I. , Sari, A. & Österberg, P. (2019). Security Implications of Fog Computing on the Internet of Things. In International Conference on Consumer Electronics (ICCE). (IEEE International Symposium on Consumer Electronics)  

Krug, S. , Bader, S. , Oelmann, B. & O'Nils, M. (2019). Suitability of Communication Technologies for Harvester-Powered IoT-Nodes. In IEEE International Workshop on Factory Communication Systems - Proceedings, WFCS.  

Butun, I. , Pereira, N. & Gidlund, M. (2018). Analysis of LoRaWAN V1.1 Security. In Proceedings of the 4th ACM MobiHoc Workshop on Experiences with the Design and Implementation of Smart Objects (SMARTOBJECTS '18)..  

Shallari, I. , Krug, S. & O'Nils, M. (2018). Architectural evaluation of node : server partitioning for people counting. In ACM International Conference Proceeding Series. New York :  

Pérez-Penichet, C. , Noda, C. , Varshney, A. & Voigt, T. (2018). Battery-Free 802.15.4 Receiver. In 2018 17th ACM/IEEE International Conference on Information Processing in Sensor Networks (IPSN).. pp. 164--175.  

Rusu, C. , Bader, S. , Oelmann, B. , Alvandpour, A. , Enoksson, P. , Braun, T. , Tiedke, S. , Molin, R. D. & et al. (2018). Challenges for Miniaturised Energy Harvesting Sensor Systems. In 2018 10th International Conference on Advanced Infocomm Technology (ICAIT).. pp. 214--217.  

Forsström, S. , Butun, I. , Eldefrawy, M. , Jennehag, U. & Gidlund, M. (2018). Challenges of Securing the Industrial Internet of Things Value Chain. In 2018 Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2018 - Proceedings.. pp. 218--223.    

Shahzad, K. & O'Nils, M. (2018). Condition Monitoring in Industry 4.0 - Design Challenges and Possibilities : A Case Study. In 2018 Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2018 - Proceedings.. pp. 101--106.  

Mahmood, A. , Hossain, M. M. A. & Gidlund, M. (2018). Cross-Layer Optimization of Wireless Links under Reliability and Energy Constraints. In IEEE Wireless Communications and Networking Conference, WCNC. New York : (IEEE Wireless Communications and Networking Conference)

Lindén, J. , Forsström, S. & Zhang, T. (2018). Evaluating Combinations of Classification Algorithms and Paragraph Vectors for News Article Classification. In Proceedings of the 2018 Federated Conference on Computer Science and Information Systems. Warzaw : (Annals of Computer Science and Information Systems). pp. 489--495.  

Aranda, J. J. L. , Bader, S. & Oelmann, B. (2018). Force Transmission Interfaces for Pressure Fluctuation Energy Harvesters. In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. (IEEE Industrial Electronics Conference). pp. 4230--4235.  

Alqaysi, H. , Lawal, N. , Fedorov, I. & O'Nils, M. (2018). Full Coverage Optimization for Multi Camera Dome Placement in Volumetric Monitoring. In ACM International Conference Proceeding Series. New York, NY, USA :  

Krug, S. & O'Nils, M. (2018). IoT Communication Introduced Limitations for High Sampling Rate Applications. In GI/ITG KuVS Fachgespräch Sensornetze 13. & 14. September 2018, Braunschweig : Technical Report.    

Ferrari, N. , Gebremichael, T. , Jennehag, U. & Gidlund, M. (2018). Lightweight Group-Key Establishment Protocol for IoT Devices: Implementation and Performance Analyses. In 2018 Fifth International Conference on Internet of Things : Systems, Management and Security.  

Gebremichael, T. , Jennehag, U. & Gidlund, M. (2018). Lightweight IoT Group Key Establishment Scheme Using One-way Accumulator. In 2018 International Symposium on Networks, Computers and Communications (ISNCC).  

Beltramelli, L. , Guntupalli, L. , Gidlund, M. , Österberg, P. & Jennehag, U. (2018). Modeling of Enhanced Distributed Channel Access with Station Grouping: A Throughput Analysis. In Proc. IEEE 88th Vehicular Technology Conference (VTC'18-fall), Chicago, USA, Aug. 2018..  

Baswade, A. M. , Beltramelli, L. , Antony, F. A. , Gidlund, M. , Reddy Tamma, B. & Guntupalli, L. (2018). Modelling and Analysis of Wi-Fi and LAA Coexistence with Priority Classes. In 2018 14th International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob).  

Cheng, P. & Szewczyk, R. (2018). Modified description of magnetic hysteresis in Jiles-Atherton model. In Automation 2018: Advances In Automation, Robotics And Measurement Techniques. (Advances in Intelligent Systems and Computing). pp. 648--654.  

Rydblom, S. & Thörnberg, B. (2018). Particle Measurement Volume and Light Intensity in a Shadowgraph Imaging System. In IST 2018 - IEEE International Conference on Imaging Systems and Techniques, Proceedings.  

Farag, H. , Mahmood, A. , Gidlund, M. & Österberg, P. (2018). PR-CCA MAC : A Prioritized Random CCA MAC Protocol for Mission-Critical IoT Applications. In 2018 IEEE International Conference on Communications (ICC).  

Guntupalli, L. , Farag, H. , Mahmood, A. & Gidlund, M. (2018). Priority-Oriented Packet Transmissions in Internet of Things : Modeling and Delay Analysis. In 2018 IEEE International Conference on Communications (ICC).  

Qureshi, U. M. , Hancke, G. P. , Gebremichael, T. , Jennehag, U. , Forsström, S. & Gidlund, M. (2018). Survey of Proximity Based Authentication Mechanisms for the Industrial Internet of Things. In IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society.. pp. 5246--5251.  

Forsström, S. , Jennehag, U. , Österberg, P. , Kardeby, V. & Lindqvist, J. (2018). Surveying and Identifying the Communication Platforms of the Internet of Things. In 2018 Global Internet of Things Summit (GIoTS).. pp. 121--126.  

Nazar Ul Islam, M. , Cheng, P. & Oelmann, B. (2018). Torque sensor design considering thermal stability for harsh industrial environments. In Proceedings of the International Conference on Sensing Technology, ICST. (International Conference on Sensing Technology). pp. 83--86.  

Fedorov, I. , Lawal, N. , Thörnberg, B. , Alqaysi, H. & O'Nils, M. (2018). Towards calibration of outdoor multi-camera visual monitoring system. In ACM International Conference Proceeding Series. New York, NY, US :  

Wang, B. , Zhang, T. , Chang, Z. , Ristaniemi, T. & Liu, G. (2017). 3D Matrix-Based Visualization System of Association Rules. In IEEE CIT 2017 - 17th IEEE International Conference on Computer and Information Technology.. pp. 357--362.  

Bader, S. & Oelmann, B. (2017). A concept for remotely reconfigurable solar energy harvesting testbeds. In Proceedings of IEEE Sensors. (IEEE Sensors). pp. 837--839.  

Shallari, I. , Anwar, Q. , Imran, M. & O'Nils, M. (2017). Background Modelling, Analysis and Implementation for Thermographic Images. In PROCEEDINGS OF THE 2017 SEVENTH INTERNATIONAL CONFERENCE ON IMAGE PROCESSING THEORY, TOOLS AND APPLICATIONS (IPTA 2017).  

Lennvall, T. , Gidlund, M. & Åkerberg, J. (2017). Challenges when bringing IoT into Industrial Automation. In AFRICON, 2017 IEEE.. pp. 905--910.    

Pirmohammadiai, R. , Ataie, I. & Taami, T. (2017). Cloud Based Mobile Services in Academic Environment. In Proceedings - 2017 International Conference on Computational Science and Computational Intelligence, CSCI 2017.. pp. 691--696.  

Guntupalli, L. , Li, F. & Gidlund, M. (2017). Energy Harvesting Powered Packet Transmissions in Duty-cycled WSNs : A DTMC Analysis. In Proc. of IEEE GLOBECOM'17, Singapore, Dec. 2017. (IEEE Global Communications Conference)  

Alqaysi, H. , Lawal, N. , Fedorov, I. & O'Nils, M. (2017). Evaluating Coverage Effectiveness of Multi-Camera Domes Placement for Volumetric Surveillance. In ICDSC 2017 Proceedings of the 11th International Conference on Distributed Smart Cameras. New York, NY, USA : . pp. 49--54.  

Shallari, I. , Imran, M. , Lawal, N. & O'Nils, M. (2017). Evaluating Pre-Processing Pipelines for Thermal-Visual Smart Camera. In Proceedings of the 11th International Conference on Distributed Smart Cameras.. pp. 95--100.  

Aranda, J. J. L. , Oelmann, B. & Bader, S. (2017). Fluid coupling interfaces for hydraulic pressure energy harvesters. In 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM). (IEEE ASME International Conference on Advanced Intelligent Mechatronics). pp. 1556--1562.  

Fedorov, I. , Lawal, N. , O'Nils, M. & Alqaysi, H. (2017). Placement Strategy of Multi-Camera Volumetric Surveillance System for Activities Monitoring. In ICDSC 2017 Proceedings of the 11th International Conference on Distributed Smart Cameras. New York, NY, USA : . pp. 113--118.  

Pérez-Penichet, C. , Varshney, A. , Noda, C. & Voigt, T. (2017). Poster abstract : Augmenting WSNs with interoperable 802.15.4 sensor tags. In SenSys 2017 - Proceedings of the 15th ACM Conference on Embedded Networked Sensor Systems.  

Yang, Q. , Wang, S. & Zhang, T. (2017). Pruning and Summarizing the Discovered Time Series Association Rules from Mechanical Sensor Data. In PROCEEDINGS OF THE 3RD ANNUAL INTERNATIONAL CONFERENCE ON ELECTRONICS, ELECTRICAL ENGINEERING AND INFORMATION SCIENCE (EEEIS 2017). Paris : (Advances in Engineering Research). pp. 40--45.    

Ahmad, J. , Andersson, H. & Sidén, J. (2017). Sitting Posture Recognition using Screen Printed Large Area Pressure Sensors. In Proceedings of IEEE Sensors. (IEEE Sensors). pp. 232--234.  

Rizzi, M. , Ferrari, P. , Flammini, A. , Sisinni, E. & Gidlund, M. (2017). Using LoRa for Industrial Wireless Networks. In 2017 IEEE 13th International Workshop on Factory Communication Systems (WFCS).  

Gidlund, M. , Lennvall, T. & Åkerberg, J. (2017). Will 5G Become Yet Another Wireless Technology for Industrial Automation?. In Proceedings of the 2017 IEEE International Conference on Industrial Technology (ICIT).. pp. 1319--1324.    

Rondón, R. , Landernäs, K. & Gidlund, M. (2016). An Analytical Model of the Effective Delay Performance for Bluetooth Low Energy. In IEEE 27th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC'17), Valencia, Spain, Sept. 2016... pp. 6--11.  

Lawal, N. , O'Nils, M. & Imran, M. (2016). Design exploration of a multi-camera dome for sky monitoring. In ACM International Conference Proceeding Series.. pp. 14--18.  

Nazar Ul Islam, M. , Cheng, P. & Oelmann, B. (2016). Functional verification of a torque sensor based on the volumetric strain method. In Proceedings - 2016 IEEE International Power Electronics and Motion Control Conference (PEMC).. pp. 818--823.  

Haller, S. , Cheng, P. & Oelmann, B. (2016). Initial characterization of a 2V 1.1kW MOSFET commutated DC motor. In IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society. (IEEE Industrial Electronics Society). pp. 4287--4292.  

Anwar, Q. , Imran, M. & O'Nils, M. (2016). Intelligence Partitioning as a Method for Architectural Exploration of Wireless Sensor Node. In Proceedings of the International Conference on Computational Science and Computational Intelligence (CSCI), 2016... pp. 935--940.  

Haller, S. , Cheng, P. & Oelmann, B. (2016). Investigation of a 2 V 1.1 kW MOSFET commutated DC motor. In Proceedings - 2016 IEEE International Power Electronics and Motion Control Conference (PEMC).. pp. 586--593.  

Nazar Ul Islam, M. , Cheng, P. & Oelmann, B. (2016). Method of torque measurement based on volumetric strain. In Proceedings of the SICE Annual Conference 2016 Tsukuba, Japan, September 20-23, 2016.. pp. 116--123.  

Ma, X. , Bader, S. & Oelmann, B. (2016). Solar panel modelling for low illuminance indoor conditions. In 2016 2ND IEEE NORDIC CIRCUITS AND SYSTEMS CONFERENCE (NORCAS).  

Doctoral theses

Nazar Ul Islam, M. (2016). Method of torque measurement based on volumetric strain. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2016 (Mid Sweden University doctoral thesis : 249)

Licentiate theses, comprehensive summaries

Farag, H. (2019). Enabling Time- and Mission-Critical Applications in Industrial Wireless Sensor Networks. Lic. (Comprehensive summary) Sundsvall, Sweden : Mid Sweden University, 2019 (Mid Sweden University licentiate thesis : 151)  

Shallari, I. (2019). Intelligence Partitioning for IoT : Communication and Processing Inter-Effects for Smart Camera Implementation. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2019 (Mid Sweden University licentiate thesis : 152)

Lechuga Aranda, J. J. (2019). Interfaces In Hydraulic Pressure Energy Harvesters. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2019 (Mid Sweden University licentiate thesis : 157)  

Gebremichael, T. (2019). Lightweight Cryptographic Group Key Management Protocols for the Internet of Things. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2019 (Mid Sweden University licentiate thesis : 154)  

Rondón, R. (2019). Low Power Wireless Technologies for IIoT : Analysis and enhancement of communication delay, reliability and scalability. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2019 (Mid Sweden University licentiate thesis : 158)

Haller, S. (2019). MOSFET enabled low-voltage high-current DC traction drive : a pioneering concept for battery electric vehicles. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2019 (Mid Sweden University licentiate thesis : 153)

Rydblom, S. (2017). Measuring Water Droplets to Detect Atmospheric Icing. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2017 (Mid Sweden University licentiate thesis : 134)  

Licentiate theses, monographs

Lavassani, M. (2018). Reliable Information Exchange in IIoT : Investigation into the Role of Data and Data-Driven Modelling. Lic. Sundsvall : Mid Sweden University, 2018 (Mid Sweden University licentiate thesis : 147)  

The page was updated 9/18/2019