Publications Complex Materials

Save favourite 24 Mar March 2016

Publications Complex Materials

Articles in journals

Andres, B. , Dahlström, C. , Blomquist, N. , Norgren, M. & Olin, H. (2018). Cellulose binders for electric double-layer capacitor electrodes : The influence of cellulose quality on electrical properties. Materials & design, vol. 141, pp. 342-349.  

Kumar, V. , Forsberg, S. , Engström, A. , Nurmi, M. , Dahlström, C. & Toivakka, M. (2017). Conductive carbon-nanocellulose coatings on paper. TAPPI Journal, vol. 16: 6, pp. 310-311.

Kumar, V. , Forsberg, S. , Engström, A. , Nurmi, M. , Andres, B. , Dahlström, C. & Toivakka, M. (2017). Conductive nanographite-nanocellulose coatings on paper. Flexible And Printed Electronics, vol. 2: 3  

Eivazihollagh, A. , Bäckström, J. , Dahlström, C. , Carlsson, F. , Ibrahem, I. , Lindman, B. , Edlund, H. & Norgren, M. (2017). One-pot synthesis of cellulose-templated copper nanoparticles with antibacterial properties. Materials letters (General ed.), vol. 187, pp. 170-172.    

Mattsson, A. & Uesaka, T. (2017). Time-dependent breakdown of fiber networks : Uncertainty of lifetime. Physical review. E, vol. 95: 5  

Alimadadi, M. & Uesaka, T. (2016). 3D-oriented fiber networks made by foam forming. Cellulose (London), vol. 23: 1, pp. 661-671.    

Uesaka, T. (2016). Complex Matters : Things that matter. Nordic Pulp & Paper Research Journal, vol. 31: 2, pp. 213-218.

Andres, B. , Engström, A. , Blomquist, N. , Forsberg, S. , Dahlström, C. & Olin, H. (2016). Electrode Mass Balancing as an Inexpensive and Simple Method to Increase the Capacitance of Electric Double-Layer Capacitors. PLoS ONE, vol. 11: 9, pp. 1-12.    

Forsberg, V. , Zhang, R. , Joakim, B. , Dahlström, C. , Andres, B. , Norgren, M. , Andersson, M. , Hummelgård, M. & et al. (2016). Exfoliated MoS2 in Water without Additives. PLoS ONE, vol. 11: 4    

Forsberg, V. , Zhang, R. , Andersson, H. , Bäckström, J. , Dahlström, C. , Norgren, M. , Andres, B. & Olin, H. (2016). Liquid Exfoliation of Layered Materials in Water for Inkjet Printing. Journal of Imaging Science and Technology, vol. 60: 4, pp. 1-7.  

Osong, S. H. , Dahlström, C. , Forsberg, S. , Andres, B. , Engstrand, P. , Norgren, S. & Engström, A. (2016). Nanofibrillated cellulose/nanographite composite films. Cellulose (London), vol. 23: 4, pp. 2487-2500.  

Mattsson, A. & Uesaka, T. (2015). Time-dependent statistical failure of fiber networks. Physical Review E. Statistical, Nonlinear, and Soft Matter Physics, vol. 92: 4    

Andres, B. , Forsberg, S. , Dahlström, C. , Blomquist, N. & Olin, H. (2014). Enhanced electrical and mechanical properties of nanographite electrodes for supercapacitors by addition of nanofibrillated cellulose. Physica status solidi. B, Basic research, vol. 251: 12, pp. 2581-2586.  

Wiklund, H. S. & Uesaka, T. (2013). Microfluidics of imbibition in random porous media. Physical Review E. Statistical, Nonlinear, and Soft Matter Physics, vol. 87: 2, pp. 023006    

Zhang, R. , Andersson, H. , Andersson, M. , Andres, B. , Edlund, H. , Edström, P. , Edvardsson, S. , Forsberg, S. & et al. (2013). Soap-film coating : High-speed deposition of multilayer nanofilms. Scientific Reports, vol. 3, pp. Art. no. 1477    

Kulachenko, A. & Uesaka, T. (2012). Direct simulations of fiber network deformation and failure. Mechanics of materials (Print), vol. 51, pp. 1-14.  

Wiklund, H. & Uesaka, T. (2012). Edge-wicking : Micro-fluidics of two-dimensional liquid penetrationinto porous structures. Nordic Pulp & Paper Research Journal, vol. 27: 2, pp. 403-408.    

Dahlström, C. & Uesaka, T. (2012). Microstructure Variations in Paper Coating : Direct Observations. Industrial & Engineering Chemistry Research, vol. 51: 24, pp. 8246-8252.  

Wiklund, H. & Uesaka, T. (2012). Simulations of shearing of capillary bridges. Journal of Chemical Physics, vol. 136: 9, pp. Art. no. 094703  

Uesaka, T. & Juntunen, J. (2012). Time-dependent, stochastic failure of paper and box. Nordic Pulp & Paper Research Journal, vol. 27: 2, pp. 370-374.      

Wiklund, H. , Lindström, S. B. & Uesaka, T. (2011). Boundary condition considerations in lattice Boltzmann formulations of wetting binary fluids. Computer Physics Communications, vol. 182: 10, pp. 2192-2200.  

Dahlström, C. , Allem, R. & Uesaka, T. (2011). New Method for Characterizing Paper Coating Structures Using Argon Ion Beam Milling and Field Emission Scanning Electron Microscopy. Journal of Microscopy, vol. 241: 2, pp. 179-187.  

Holmvall, M. , Lindström, S. & Uesaka, T. (2011). Simulation of two-phase flow with moving immersed boundaries. International Journal for Numerical Methods in Fluids, vol. 67: 12, pp. 2062-2080.  

Holmvall, M. , Uesaka, T. , Drolet, F. & Lindström, S. (2011). Transfer of a microfluid to a stochastic fibre network. Journal of Fluids and Structures, vol. 27: 7, pp. 937-946.  

Edvardsson, S. & Uesaka, T. (2010). System dynamics of the open draw with web adhesion: Particle approach. Journal of applied mechanics, vol. 77: 2, pp. 1-11.  

Lindström, S. & Uesaka, T. (2009). A numerical investigation of the rheology of sheared fiber suspensions. Physics of fluids, vol. 21: 8, pp. 083301  

Dahlström, C. & Uesaka, T. (2009). New Insights into Coating Uniformity and Base Sheet Structures. Industrial & Engineering Chemistry Research, vol. 48: 23, pp. 10472-10478.  

Lindström, S. & Uesaka, T. (2008). Particle-level simulation of forming of the fiber network in papermaking. International Journal of Engineering Science, vol. 46: 9, pp. 858-876.  

Holmvall, M. & Uesaka, T. (2008). Print Uniformity of Corrugated Board in Flexo Printing: Effects of Corrugated Board and Halftone Dot Deformations.. Packaging technology & science, vol. 21: 7, pp. 385-394.  

Lindström, S. & Uesaka, T. (2008). Simulation of semidilute suspensions of non-Brownian fibres in shear flow. Journal of Chemical Physics, vol. 128: 2, pp. 024901  

Holmvall, M. & Uesaka, T. (2008). Striping of Corrugated Board in Full-tone Flexo Post-Printing. Appita journal, vol. 61: 1, pp. 35-40.

Kulachenko, A. , Gradin, P. & Uesaka, T. (2007). Basic mechanisms of fluting formation and retention in paper. Mechanics of materials (Print), vol. 39: 7, pp. 643-663.  

Holmvall, M. & Uesaka, T. (2007). Nip Mechanics of Flexo Post-Printing on Corrugated Board.. Journal of composite materials, vol. 41: 17, pp. 2129-2145.  

Deng, X. , Ferahi, M. & Uesaka, T. (2007). Pressroom Runnability : A Comprehensive Analysis of Press Room and Mill Database. Pulp & paper Canada, vol. 108: 2, pp. 42-51.

Lindström, S. & Uesaka, T. (2007). Simulation of the motion of flexible fibres in viscous fluid flow. Physics of fluids, vol. 19: 11  

Uesaka, T. (2005). Principal Factors Controlling Web Breaks in Pressrooms : quantitative evaluation. Appita journal, vol. 58: 6, pp. 425-432.

Vidal, D. , Zou, X. & Uesaka, T. (2004). Modelling coating structure development : Monte-Carlo deposition of particles with irregular shapes. Nordic Pulp and Paper Research Journal, vol. 19: 4, pp. 420-427.    

Hristopulos, D. & Uesaka, T. (2004). Structural disorder effects on the tensile strength distribution of heterogeneous brittle materials with emphasis on fiber networks. Physical Review B. Condensed Matter and Materials Physics, vol. 70: 6, pp. 64108  

Provatas, N. & Uesaka, T. (2003). Modelling paper structure and paper-press interactions. Journal of Pulp and Paper Science (JPPS), vol. 29: 10, pp. 332-340.

Zou, X. , Uesaka, T. & Norayer, G. (1996). Prediction of paper permanence by accelerated aging .1. Kinetic analysis of the aging process. Cellulose (London), vol. 3: 4, pp. 243-267.

Zou, X. , Uesaka, T. & Gurnagul, N. (1996). Prediction of paper permanence by accelerated aging .2. Comparison of the predictions with natural aging results. Cellulose (London), vol. 3: 4, pp. 269-279.

Zou, X. , Gurnagul, N. , Uesaka, T. & Bouchard, J. (1994). ACCELERATED AGING OF PAPERS OF PURE CELLULOSE - MECHANISM OF CELLULOSE DEGRADATION AND PAPER EMBRITTLEMENT. Polymer degradation and stability, vol. 43: 3, pp. 393-402.

Uesaka, T. (1994). GENERAL FORMULA FOR HYGROEXPANSION OF PAPER. Journal of Materials Science, vol. 29: 9, pp. 2373-2377.

Nanri, Y. & Uesaka, T. (1993). DIMENSIONAL STABILITY OF MECHANICAL PULPS - DRYING SHRINKAGE AND HYGROEXPANSIVITY. TAPPI Journal, vol. 76: 6, pp. 62-66.

Gurnagul, N. , Howard, R. , Zou, X. , Uesaka, T. & Page, D. (1993). THE MECHANICAL PERMANENCE OF PAPER - A LITERATURE-REVIEW. Journal of Pulp and Paper Science (JPPS), vol. 19: 4, pp. J160-J166.

Zou, X. , Gurnagul, N. & Uesaka, T. (1993). THE ROLE OF LIGNIN IN THE MECHANICAL PERMANENCE OF PAPER .1. EFFECT OF LIGNIN CONTENT. Journal of Pulp and Paper Science (JPPS), vol. 19: 6, pp. J235-J239.

Uesaka, T. (1991). DIMENSIONAL STABILITY OF PAPER - UPGRADING PAPER PERFORMANCE IN END USE. Journal of Pulp and Paper Science (JPPS), vol. 17: 2, pp. J39-J46.

Uesaka, T. , Murakami, K. & Imamura, R. (1979). BIAXIAL TENSILE BEHAVIOR OF PAPER. TAPPI Journal, vol. 62: 8, pp. 111-114.

Chapters in books

Dahlström, C. (2013). Sample Preparation Using Argon Ion Beam Milling. In Argon: Production, Characteristics and Applications. Hauppauge, NY : Nova Science Publishers, Inc.. pp. 223-240.

Uesaka, T. (2012). Mechanics in printing nip for paper and board. In Mechanics of paper products. Berlin : Mouton de Gruyter. pp. 181-193.

Uesaka, T. (2012). Statistical aspects of failure of paper and board. In Mechanics of paper products. Berlin : Mouton de Gruyter. pp. 139-159.

Uesaka, T. (2012). Web dynamics in paper transport systems. In Engineering Mechanics of Paper and Board Products. Berlin : Mouton de Gruyter. pp. 93-110.

Conference papers

Kumar, V. , Forsberg, S. , Engström, A. , Nurmi, M. , Dahlström, C. & Toivakka, M. (2017). Conductive carbon-nanocellulose coatings on paper. In Paper Conference and Trade Show, PaperCon 2017 : Renew, Rethink, Redefine the Future.. pp. 26--35.

Mattsson, A. & Uesaka, T. (2017). Creep failure of fibre network : The Origin of uncertainty. Paper presented at the Svenska mekanikdagar, Uppsala,12-13 juni, 2017  

Mattsson, A. & Uesaka, T. (2017). Time-dependent, statistical failure of fibre network. Does Weibull distribution hold?. Paper presented at the Euromech colloquium - Deformation and damage mechanisms of wood-fibre network-based materials and structures, Stockholm, 7-9 juni, 2017

Forsberg, S. , Kumar, V. , Engström, A. , Maristiina, N. , Dahlström, C. & Martti, T. (2016). Effect of calendering and coating formulations on conductivity in paper-based electrodes. Paper presented at the TAPPI Advanced Coating Symposium 2016, October 4-6, 2016, Stockholm

Forsberg, V. , Zhang, R. , Andersson, H. , Bäckström, J. , Dahlström, C. , Norgren, M. , Andres, B. & Olin, H. (2016). Liquid Exfoliation of Layered Materials in Water for Inkjet Printing. In Printing for Fabrication 2016 : Materials, Applications, and Processes. USA :

Mattsson, A. & Uesaka, T. (2016). Statistical Failure of Fibre Network under Creep Condition. Paper presented at the VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete, Greece, 5 - 10 June 2016

Andres, B. , Dahlström, C. , Engström, A. , Forsberg, S. , Blomquist, N. & Olin, H. (2015). Cellulose-based binder systems for electrochemical electrodes. Paper presented at the 2015 E-MRS Spring Meeting

Mattsson, A. & Uesaka, T. (2015). Characterisation of time-dependent, stochastic failure of fibre-based materials. Paper presented at the International Paper Physics Conference, Tokyo, 29 October - 1 November 2015

Uesaka, T. (2015). Complex matters: Things that matter. Paper presented at the Tokyo 2015: Joint Conference of International Paper Physics Conference and Paper and Coating Chemistry Symposium

Henshaw Osong, S. , Dahlström, C. , Forsberg, S. , Andres, B. , Engstrand, P. , Norgren, S. , Olin, H. & Engström, A. (2015). Development of CTMP-based nanofibrillated Cellulose /nanographite composites for paper applications. Paper presented at the 9th International Fundamental Mechanical Pulp Research Seminar, 19-20May, Trondheim, Norway

Alecrim, V. , Zhang, R. , Hummelgård, M. , Andres, B. , Dahlström, C. , Norgren, M. , Andersson, M. & Olin, H. (2015). Exfoliated Layered Materials for Digital Fabrication. In NIP & Digital Fabrication Conference. (NIP & Digital Fabrication Conference). pp. 192--194.

Faria, G. C. , Duong, D. T. , Dahlström, C. , Rivnay, J. , Malliaras, G. , Owens, R. & Salleo, A. (2015). Modeling Transient Drain Current Response in Biofunctionalized Organic Electrochemical Transistors. Paper presented at the XIV Brazil MRS meeting

Forsberg, S. , Andres, B. , Blomquist, N. , Dahlström, C. , Engström, A. & Olin, H. (2015). Paper-based supercapacitors. Paper presented at the 2015 E-MRS Spring Meeting, May 11-15, 2015, Lille, France

Dahlström, C. , Andres, B. , Faria, G. C. , Engström, A. , Duong, D. T. & Salleo, A. (2015). Structural Change of Cellulose Nanofibers in Supercapacitor Electrodes during Galvanostatic Cycling. Paper presented at the 2015 MRS Fall Meeting & Exhibit

Dahlström, C. , Andres, B. & Forsberg, S. (2014). Coating Uniformity and its Effect on Supercapacitor Capacitance. Paper presented at the 2014 TAPPI Advanced Coating Fundamentals Symposium

Alimadadi, M. & Uesaka, T. (2014). Exploring One-more Dimension of Paper: Properties of 3D-Orieneted Fiber Network. In Progress in Paper Physics Proceedings 2014.  

Mattsson, A. & Uesaka, T. (2014). Predicting Stochastic Failure of Fibre-based Materials in Long Term and Short Term. Paper presented at the Progress in Paper Physics, Raleigh, North Carolina, U.S.A. September 8-11, 2014    

Mattsson, A. & Uesaka, T. (2014). Time-Dependent Stochastic Failure of Fibre Network. Paper presented at the 11th World Congress on Computational Mechanics, Barcelona Spain, 20-25 July 2014    

Uesaka, T. (2013). Performance-based Design of Corrugated Board and Box. Paper presented at the 2013 Paper Week: Annual Meeting of PAPTAC; 7 May, 2013

Mattsson, A. & Uesaka, T. (2013). Time-dependent, statistical failure of paperboard in compression. In Advances in pulp and paper research, Cambridge 2013. UK :  

Uesaka, T. (2013). Variability, non-uniformity, and complexity: From product to process. In Advances in pulp and paper research, Cambridge 2013. Bury, UK :  

Dahlström, C. & Uesaka, T. (2012). Coating Microstructures : Binder Distributions. In 12th TAPPI Advanced Coating Fundamentals Symposium Proceedings, Co-located with the 16th International Coating Science and Technology Symposium, ISCST 2012.. pp. 250--257.

Uesaka, T. (2012). Fibre-fibre bond: What paper physicist sees. Paper presented at the Joint international conference of paper physics and paper/coating chemistry

Uesaka, T. , Wiklund, H. & Holmvall, M. (2012). Fluid-Structure Interactions in Random Fibre Networks. Paper presented at the ECCOMAS (European Congress of Computational Methods for Applied Sciences)

Uesaka, T. (2011). Mechanics and Physics of Wet Fibre Network. In Fundamental and Applied Pulp and Paper Modelling Symposium.

Holmvall, M. , Drolet, F. , Uesaka, T. & Lindström, S. (2011). Micro-fluidics in printing nip - Liquid transfer on random fibre network surface. In Progress in Paper Physics Seminar. Graz, Austria :

Wiklund, H. & Uesaka, T. (2011). Micro-fluidics of "water bond". In Progress in Paper Physics Seminar. Graz, Austria :

Kulachenko, A. & Uesaka, T. (2010). Simulation of Wet Fibre Network Deformation. Paper presented at the Progress in Paper Physics Seminar

Vidal, D. & Uesaka, T. (2010). Smoothed Dissipative Particle Dynamics Model for Predicting Self-Assembled Nano-Cellulose Fibre Structures. In 2010 Tappi International Conference on Nanotechnology for the Forest Product Industry.

Lindström, S. , Uesaka, T. & Hirn, U. (2009). Evolution of the paper structure along the length of a twin-wire former. In ADVANCES IN PULP AND PAPER RESEARCH, OXFORD 2009, VOLS 1-3. Bury, UK : . pp. 207--245.

Lindström, S. , Kulachenko, A. & Uesaka, T. (2009). New insights in paper forming from particle-level process simulations. In Papermaking Research Symposium 2009. Kuopio, Finland : . pp. 38-

Edvardsson, S. & Uesaka, T. (2009). Papermaking Research symposium (PRS) : Web tension variations and runnability of the open draw section. In PRS 2009 Papermaking Research Symposium. Kuopio :

Uesaka, T. (2009). Particle-level Simulation in Paper Science. In Hannu Paulapuro Symposium. Helsinki, Finland : . pp. 54--60.

Kulachenko, A. , Lindström, S. & Uesaka, T. (2009). Strength of wet fiber networks-Strength scaling. In Papermaking Research Symposium 2009. Kuopio : . pp. 35-

Edvardsson, S. & Uesaka, T. (2009). System stability of the open draw section and paper machine runnability. In ADVANCES IN PULP AND PAPER RESEARCH, OXFORD 2009, VOLS 1-3.. pp. 557--575.

Dahlström, C. , Uesaka, T. & Norgren, M. (2008). Base Sheet Structures that Control Coating Uniformity: Effects of Length Scale. In TAPPI Advanced Coating Fundamentals Symposium Proceedings.. pp. 124--133.

Lindström, S. & Uesaka, T. (2008). Effects of interparticle friction on the rheology of fibre suspensions. In 5th European Congress on Computational Methods in Applied Sciences and Engineering : TS318, Computational Materials Mechanics V.

Uesaka, T. (2008). Modelling and simulation of paper structures and paper properties. In SECOND INTERNATIONAL PAPERMAKING AND ENVIRONMENT CONFERENCE, PROCEEDING, BOOKS A AND B.. pp. 103--109.

Kulachenko, A. , Uesaka, T. & Lindström, S. (2008). Reinventing mechanics of fibre network. In Progress in Paper Physics Seminar. Helsinki : . pp. 185--193.

Lindström, S. & Uesaka, T. (2008). Simulation of paper structure development in a roll-blade former. In Progress in Paper Physics Seminar. Espoo : . pp. 139--141.

Lindström, S. & Uesaka, T. (2007). A model for flexible fibres in viscous and inert fluid. In 61st Appita annual conference and exhibition, Gold Coast, Australia, 6-9 May 2007, 2007 International paper physics conference, 6pp [Carlton, Australia: Appita, 2007.. pp. 23--28.

Uesaka, T. (2007). Prediction of Low Tail of Strength Distribution of Paper. In Proceedings of the 2007 International Paper Physics Conference.. pp. 115--122.

Holmvall, M. & Uesaka, T. (2007). Striping of Corrugated Board in Halftone Flexo Post-printing. In 61st Appita annual conference and exhibition, Gold Coast, Australia, 6-9 May 2007, 2007 International paper physics conference, 6pp.

Kulachenko, A. & Uesaka, T. (2007). The Effects of Fibre Orientation Streaks on out-of-Plane Instability of Paper. In Proceedings of the 2007 International Paper Physics Conference.. pp. 255--260.

Kulachenko, A. , Gradin, P. A. & Uesaka, T. (2006). Basic mechanisms of fluting. In 92nd Annual Meeting Preprints-Book A, 7 Feb. 2006 , Canada. Que., Canada : . pp. 161--173.

Holmvall, M. & Uesaka, T. (2006). Nip Mechanics of Flexo Post-Printing on Corrugated Board. In Euromech Colloquium 486.

Holmvall, M. & Uesaka, T. (2006). Striping of Corrugated Board in Flexo Post-Printing. In International Printing and Graphic Arts Conference proceedings 2006.

Lindström, S. & Uesaka, T. (2006). Suspensions of flexible fibres in flows of decaying turbulence. In Euromech. Sundsvall :

Drolet, F. & Uesaka, T. (2005). A Stochastic Structure Model for Predicting sheet Consolidation and Print Uniformity. In 13th fundamental research symposium, Cambridge, 11-16 sept. 2005.. pp. 1139--1154.

Uesaka, T. (2005). Computational Modelling of Stochastic Paper Structures and Its Application to Paper Material Design. In Proc. International Symposium of Wood Science and Technology.

Deng, N. , Ferahi, M. & Uesaka, T. (2005). Pressroom runnability : comprehensive analyses of pressroom and mill databases. In Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC) : Book C.. pp. C217--228.

Lindström, S. & Uesaka, T. (2005). Stochastic Modelling of Paper Structure. Effects of Forming Section. In Proceedings, 5th Biennal Johan Gullichsen Colloquium, Helsinki, 17. Nov. 2005. Helsinki : . pp. 25--35.

Kulachenko, A. , Gradin, P. & Uesaka, T. (2005). Tension wrinkling and fluting in heatset web offset printing process : post buckling analysis. In Advances in Paper Science and Technology : Transactions of the 13th fundamental research symposium, Vols 1-3.. pp. 1075--1099.

Kulachenko, A. , Gradin, P. & Uesaka, T. (2005). The effect of local moisture variations on fluting in heatset web offset printing. In Proc. of 5th Biennial Johan Gullichsen Colloquium.

Doctoral theses, comprehensive summaries

Dahlström, C. (2012). Quantitative microscopy of coating uniformity. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2012 (Mid Sweden University doctoral thesis : 129)  

Patents

Shigetani, T. , Yamana, T. , Kamiya, M. & Uesaka, T. (1990). Support sheet for photographic paper .

Reports

Kulachenko, A. , Gradin, P. A. & Uesaka, T. (2006). Basic mechanisms of fluting formation and retention in paper. Sundsvall : Mittuniversitetet, FSCN (Rapportserie FSCN 2006:36). (FSCN-rapport R-06-65).  

Uesaka, T. (2004). Web breaks in pressroom : a review. Sundsvall : Mitthögskolan, FSCN (Rapportserie FSCN 2004:31). (FSCN-rapport R-04-58).