Publications in Foric

Save favourite 11 Oct October 2016

Publications

Articles in journals

Zhao, Y. , Moser, C. , Henriksson, G. , Lindström, M. E. & Li, J. (2017). Cellulose Nanofibers from Softwood, Hardwood, and Tunicate: Preparation-Structure-Film Performance Interrelation. ACS Applied Materials and Interfaces, vol. 9: 15, pp. 13508-13519.  

Ferritsius, O. , Ferritsius, R. , Hill, J. , Karlström, A. , Ferritsius, J. & Eriksson, K. (2017). Process considerations and its demands on TMP property measurements - A study on tensile index. Nordic Pulp & Paper Research Journal, vol. 32: 1, pp. 45-53.  

Afewerki, S. , Alimohammadzadeh, R. , Osong, S. H. , Tai, C. , Engstrand, P. & Cordova, A. (2017). Sustainable Design for the Direct Fabrication and Highly Versatile Functionalization of Nanocelluloses. Global Challenges, vol. 1: 7    

Rahman, H. , Lindström, M. E. , Sandström, P. , Salmen, L. & Engstrand, P. (2017). The effect of increased pulp yield using additives in the softwood kraft cook on the physical properties of low-grammage handsheets. Nordic Pulp & Paper Research Journal, vol. 32: 3, pp. 317-323.    

Johansson, J. (2017). Value added decking and cladding products in Sweden : a case study of the current market situation. BioProducts Business, vol. 2: 4, pp. 29-41.    

Hyll, K. , Björk, E. & Vomhoff, H. (2016). Flow imaging characterisation of morphological changes of chemical pulp due to refining. Nordic Pulp & Paper Research Journal, vol. 31: 3, pp. 411-421.

Osong, S. H. , Dahlström, C. , Forsberg, S. , Andres, B. , Engstrand, P. , Norgren, S. & Engström, A. (2016). Nanofibrillated cellulose/nanographite composite films. Cellulose (London), vol. 23: 4, pp. 2487-2500.  

Karlström, A. , Hill, J. , Ferritsius, R. & Ferritsius, O. (2016). Pulp property development Part II : Process non-linearities and their influence on pulp property development. Nordic Pulp & Paper Research Journal, vol. 31: 2, pp. 287-299.

Karlström, A. , Hill, J. , Ferritsius, O. & Ferritsius, R. (2016). Pulp property development Part III : Fiber residence time and consistency profile impact on specific energy and pulp properties. Nordic Pulp & Paper Research Journal, vol. 31: 2, pp. 300-307.

Osong, S. H. , Norgren, S. , Engstrand, P. , Lundberg, M. , Reza, M. & Tapani, V. (2016). Qualitative evaluation of microfibrillated cellulose usingthe crill method and some aspects of microscopy. Cellulose (London), vol. 23: 6, pp. 3611-3624.    

Moser, C. , Henriksson, G. & Lindström, M. E. (2016). Specific Surface Area Increase during Cellulose Nanofiber Manufacturing Related to Energy Input. BioResources, vol. 11: 3, pp. 7124-7132.  

Reyier Österling, S. , Ferritsius, O. , Ferritsius, R. , Johansson, C. & Stångmyr, J. (2016). Weighted averages and distributions of fibre characteristics of mechanical pulps – Part II: Distributions of measured and predicted fibre characteristics by using raw data from an optical fibre analyser. Appita journal, vol. 69: 1, pp. 64-73.

Karlström, A. , Hill, J. , Ferritsius, R. & Ferritsius, O. (2015). Pulp property development Part I: Interlacing under-sampled pulp properties and TMP process data using piece-wise linear functions. Nordic Pulp & Paper Research Journal, vol. 30: 4, pp. 599-608.    

Moser, C. , Lindström, M. E. & Henriksson, G. (2015). Toward Industrially Feasible Methods for Following the Process of Manufacturing Cellulose Nanofibers. BioResources, vol. 10: 2, pp. 2360-2375.  

Reyier Österling, S. , Ferritsius, O. , Ferritsius, R. & Stångmyr, J. (2015). Weighted averages and distributions of fibre characteristics of mechanical pulps Part I : Various methods of weighting data from an optical analyser can give averages that rank pulps differently. Appita journal, vol. 68: 4, pp. 357-368.

Osong, S. H. , Norgren, S. , Engstrand, P. , Lundberg, M. & Hansen, P. (2014). Crill : A novel technique to characterize nano-ligno-cellulose. Nordic Pulp & Paper Research Journal, vol. 29: 2, pp. 190-194.  

Osong, S. H. , Norgren, S. & Engstrand, P. (2014). Paper strength improvement by inclusion of nano-ligno-cellulose to Chemi-thermomechanical pulp. Nordic Pulp & Paper Research Journal, vol. 29: 2, pp. 309-316.  

Osong, S. H. , Norgren, S. & Engstrand, P. (2013). An approach to produce nano-ligno-cellulose from mechanical pulp fine materials. Nordic Pulp & Paper Research Journal, vol. 28: 4, pp. 472-479.      

Zhu, H. , Helander, M. , Moser, C. , Ståhlkrantz, A. , Söderberg, D. , Henriksson, G. & Lindström, M. (2012). A Novel Nano Cellulose Preparation Method and Size Fraction by Cross Flow Ultra-Filtration. Current organic chemistry, vol. 16: 16, pp. 1871-1875.

Ferritsius, R. , Reyier Österling, S. & Ferritsius, O. (2012). Development of TMP fibers in LC- and HC-refining. Nordic Pulp & Paper Research Journal, vol. 27: 5, pp. 860-871.  

Reyier Österling, S. , Ferritsius, O. & Ferritsius, R. (2012). The influence of fiber dimensions on mechanical pulp long fiber tensile index and density. Nordic Pulp & Paper Research Journal, vol. 27: 5, pp. 844-859.    

Rahman, H. , Engstrand, P. , Sandström, P. & Sjöstrand, B. (). Dewatering properties of low grammage handsheets softwood kraft pulps modified to minimize the need for refining. ,

Johansson, J. , Strandberg, C. & Olsson, L. (). Swedish consumers’ of durable wood materials – value, knowledge and satisfaction. ,

Articles, reviews/surveys

Osong, S. H. , Norgren, S. & Engstrand, P. (2016). Processing of wood-based microfibrillated cellulose and nanofibrillated cellulose, and applications relating to papermaking: a review. Cellulose (London), vol. 23: 1, pp. 93-123.  

Larsson, M. , Stendahl, M. & Roos, A. (2016). Supply chain management in the Swedish wood products industry – a need analysis.. Scandinavian Journal of Forest Research, vol. 31: 8, pp. 777-787.  

Larsson, M. (). Business relations, coordination and ordering between roundwood supply units and sawmills – four Swedish cases. ,

Conference papers

Hedlund, A. , Stengard, A. & Björkqvist, O. (2017). A simulation-based method for evaluation of energy system cooperation between pulp and paper mills and a district heating system : A case study. In 19 World academy of science, engineering and technology conference proceedings.. pp. 1158--1164.

Gaynullin, B. , Bryzgalov, M. , Hummelgård, C. , Mattsson, C. , Rödjegård, H. & Thungström, G. (2017). Pressure characterization and resolution limits' investigation of high accuracy NDIR Methane sensor for environmental applications. Paper presented at the 14th International Workshop on Advanced Infrared Technology and Applications, AITA 2017, Québec City, Canada, September 27-29, 2017

Johansson, O. , Fernando, D. , Fenitsius, R. , Daniel, G. & Ferritsius, O. (2016). Advancements in optical analysis yields new insight to mechanical pulping processes in an efficient and inexpensive way. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 267--276.

Eriksson, K. , Ferritsius, R. , Ferritsius, O. & Hill, J. (2016). Benefits from improved stability in process conditions and pulp properties-a double disc refiner case study. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 317--327.

Larsson, M. (2016). Mapping of sawmill supply chains. Paper presented at the IUFRO Conference, 12-17 June, 2016, Quebec, Canada

Osong, S. H. , Norgren, S. , Pettersson, G. , Engstrand, P. , Còrdova, A. , Afewerki, S. & Alimohammadzadeh, R. (2016). Processing of nanocellulose and applications relating to CTMP-based paperboard and foams. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 87--93.

Eriksson, K. , Ferritsius, J. , Ferritsius, O. , Ferritsius, R. , Hill, J. , Karlstrorrp, A. & Merseburg, K. (2016). Proper pulp sampling pre-requisite to any pulp property assessment. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 1--11.

Norgren, R. , Morgan, F. & Björkqvist, O. (2016). Pulp mill bio-sludge - sludge properties and recycling. In Proceedings of 5th International Conference on Industrial & Hazardous Waste Management, September 27th-30th, 2016, Chania, Kreta..    

Ferritsius, O. , Ferritsius, R. , Hill, J. , Eriksson, K. , Mörseburg, K. & Ferritsius, J. (2016). Untaught experiences regarding common practice and standards for sampling, characterization, control, and Design of TMP and CTMP operations. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 12--17.

Gaynullin, B. , Hummelgård, C. , Mattsson, C. , Rödjegård, H. & Thungström, G. (2015). Comparative study of CO2 and CH4 pressure dependence in the HPP NDIR platform. Paper presented at the 2015th FPIRC International Summer Conference

Henshaw Osong, S. , Dahlström, C. , Forsberg, S. , Andres, B. , Engstrand, P. , Norgren, S. , Olin, H. & Engström, A. (2015). Development of CTMP-based nanofibrillated Cellulose /nanographite composites for paper applications. Paper presented at the 9th International Fundamental Mechanical Pulp Research Seminar, 19-20May, Trondheim, Norway

Osong, S. H. (2015). Development of nanofibrillated cellulose/nanographite composites for paper applications. In TAPPI International Conference on Nanotechnology for Renewable Materials 2015.. pp. 35--55.

Norgren, R. , Fröling, M. & Björkqvist, O. (2015). Industrial Symbiosis solutions for recycling of biosludge from the pulp industry. In Proceedings of Global Cleaner Production & Sustainable Consumption Conference  1 - 4 November 2015, Sitges, Barcelona, Spain.  

Ferritsius, O. , Mörseburg, K. & Ferritsius, R. (2014). Bat of CTMP and TMP plants with respect to quality development and energy efficiency. In International Mechanical Pulping Conference, IMPC 2014.

Karlström, A. , Hill, J. , Ferritsius, O. , Ferritsius, R. & Engstrand, P. (2014). Can we increase the proportion of electrical energy into fibre development in existing HC-refiners?. In International Mechanical Pulping Conference, IMPC 2014.

Osong, S. H. , Norgren, S. , Engstrand, P. , Lundberg, M. & Hansen, P. (2014). Development of nano-ligno-cellulose produced from mechanical pulp. In International Mechanical Pulping Conference, IMPC 2014.

Ferritsius, R. , Sandberg, C. & Ferritsius, O. (2014). LC-refining of mechanical pulps and its influence on fiber curl and handsheet strength properties. In International Mechanical Pulping Conference, IMPC 2014.

Ferritsius, R. , Hill, J. , Ferritsius, O. & Karlstrom, A. (2014). On energy efficiency in chip refining. In International Mechanical Pulping Conference, IMPC 2014.

Osong, S. H. , Engstrand, P. & Norgren, S. (2013). Mechanical Properties of high-yield pulp handsheets, as affected by blends of Nano-ligno-cellulose. Paper presented at the 2013 TAPPI International Conference on Nanotechnology for Renewable Materials, Stockholm, Sweden , 24-27 June 2013.

Osong, S. H. , Norgren, S. & Engstrand, P. (2013). Nano-ligno-cellulose as strength enhancer in handsheets. Paper presented at the Marcus Wallenberg Prize (MWP 2013) - Young Researchers' Programme, Stockhom , Sweden, 23-24 Sept 2013.

Osong, S. H. , Norgren, S. & Engstrand, P. (2013). Nano-ligno-cellulose from mechanical pulp fines. Paper presented at the European Forest Products Doctoral Symposium 2013

Osong, S. H. , Engstrand, P. & Norgren, S. (2013). New Products based on Mechanical Pulps : Nano-ligno-cellulose (NLC). Paper presented at the 8th International Fundamental Mechanical Pulp Research Seminar, Åre, Sweden, 29-31 Jan, 2013.

Osong, S. H. , Engstrand, P. & Norgren, S. (2012). A New Concept to Produce Nano-ligno-cellulose Materials by Means of High Pressure Homogenization. Paper presented at the 3rd International Cellulose Conference (ICC 2012), Oct 10-12, Sapporo, Japan.

Enberg, S. , Paulsson, M. , Rundlöf, M. , Johnsen, I. A. & Axelsson, P. (2009). The influence of process conditions during pulp storage on the optical properties of Norway spruce high-yield pulps. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 117--121.

Ferritsius, O. & Rautio, M. (2007). Differences on fibre level between GW and TMP for magazine grades. In International Mechanical Pulping Conference 2007, TAPPI.. pp. 87--96.

Reyier, S. , Ferritsius, O. & Shagaev, O. (2007). Ways to measure the bonding ability distribution of fibers in mechanical pulps. In International Mechanical Pulping Conference 2007, TAPPI.. pp. 97--111.

Doctoral theses, comprehensive summaries

Osong, S. H. (2016). Mechanical Pulp-Based Nanocellulose : Processing and applications relating to paper and paperboard, composite films, and foams. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2016 (Mid Sweden University doctoral thesis : 245)  

Licentiate theses, comprehensive summaries

Rahman, H. (2018). Modifying kraft pulping to produce a softwood pulp requiring less energy in tissue paper production. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2018 (Mid Sweden University licentiate thesis : 137)  

Johansson, J. (2017). The Swedish durable wood materials market – industry structure and consumer perceptions’. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2017 (Mid Sweden University licentiate thesis : 132)

Osong, S. H. (2014). Mechanical Pulp Based Nano-ligno-cellulose : Production, Characterisation and their Effect on Paper Properties. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2014 (Mid Sweden University licentiate thesis : 109)  

Reports

Engstrand, P. O. , Ferritsius, O. , Björkqvist, O. , Johansson, L. , Johansson, Ö. , Daniel, G. , Ferritsius, R. , Karlström, A. & et al. (2015). Mekmassainitiativet för energieffektivitet, e2mp-i. Sundsvall : Mittuniversitetet (Rapportserie FSCN 2015:58).