Andrey Koptyug

Publikationer

Artiklar i tidskrifter

Sjöström, W. , Koptyug, A. , Rännar, L. & Botero, C. (2024). Near-infrared radiation : A promising heating method for powder bed fusion. Materials and Manufacturing Processes, vol. 39: 3, ss. 320-328.  

Kozadaeva, M. , Surmeneva, M. , Khrapov, D. , Rybakov, V. , Surmenev, R. , Koptyug, A. , Vladescu, A. , Cotrut, C. M. & et al. (2023). Assessment of Microstructural, Mechanical and Electrochemical Properties of Ti–42Nb Alloy Manufactured by Electron Beam Melting. Materials, vol. 16: 13  

Grubova, I. Y. , Surmenev, R. A. , Neyts, E. C. , Koptyug, A. V. , Volkova, A. P. & Surmeneva, M. A. (2023). Combined First-Principles and Experimental Study on the Microstructure and Mechanical Characteristics of the Multicomponent Additive-Manufactured Ti-35Nb-7Zr-5Ta Alloy. ACS Omega, vol. 8: 30, ss. 27519-27533.  

Botero, C. , Koptyug, A. , Sjöström, W. , Jiménez-Piqué, E. , Şelte, A. & Rännar, L. (2023). Functionally Graded Steels Obtained via Electron Beam Powder Bed Fusion. Key Engineering Materials, vol. 964, ss. 79-84.  

Khrapov, D. , Kozadayeva, M. , Koptyug, A. , Mishurova, T. , Meinel, D. , Surmenev, R. & Surmeneva, M. (2023). Geometrical features and mechanical properties of the sheet-based gyroid scaffolds with functionally graded porosity manufactured by electron beam melting. Materials Today Communications, vol. 35  

Parshin, D. V. , Gaifutdinov, R. A. , Koptioug, A. & Chupakhin, A. P. (2023). MECHANICS OF SKI SLIDING ON SNOW : CURRENT STATUS AND PROSPECTS. Journal of Applied Mechanics and Technical Physics, vol. 64: 4, ss. 693-706.  

Koptyug, A. , Sukhovei, Y. , Kostolomova, E. , Unger, I. & Kozlov, V. (2023). Novel Strategy in Searching for Natural Compounds with Anti-Aging and Rejuvenating Potential. International Journal of Molecular Sciences, vol. 24: 9  

Koptyug, A. V. , Sukhovei, Y. G. & Victor A, G. (2023). Possible Existence of the Relict Mechanism of Cell Protection During Division. Biomedical Journal of Scientific & Technical Research, vol. 51: 3  

Grubova, I. Y. , Kozadaeva, M. , Volkova, A. P. , Khrapov, D. , Surmenev, R. A. , Koptyug, A. V. , Vladescu (Dragomir), A. , Tyurin, A. & et al. (2023). Process window for electron beam melting of Ti–42Nb wt.%. Journal of Materials Research and Technology, vol. 25, ss. 4457-4478.  

Khrapov, D. , Paveleva, A. , Kozadayeva, M. , Evsevleev, S. , Mishurova, T. , Bruno, G. , Surmenev, R. , Koptyug, A. & et al. (2023). Trapped powder removal from sheet-based porous structures based on triply periodic minimal surfaces fabricated by electron beam powder bed fusion. Materials Science & Engineering, vol. 862  

Koptyug, A. , Khrapov, D. , Surmeneva, M. & Surmenev, R. (2023). Triply Periodic Minimal Surfaces Manufactured by Electron Beam Powder Bed Fusion : Approaches and Challenges. Key Engineering Materials, vol. 964, ss. 91-96.  

Loginov, Y. N. , Koptyug, A. , Popov, V. J. , Belikov, S. V. , Mukanov, G. , Golodnov, A. I. & Stepanov, S. I. (2022). Compression deformation and fracture behavior of additively manufactured Ti–6Al–4V cellular structures. International Journal of Lightweight Materials and Manufacture, vol. 5: 1, ss. 126-135.    

Facchetti, D. , Hempel, U. , Martocq, L. , Smith, A. M. , Koptyug, A. , Surmenev, R. A. , Surmeneva, M. A. & Douglas, T. E. L. (2022). Heparin enriched-wpi coating on ti6al4v increases hydrophilicity and improves proliferation and differentiation of human bone marrow stromal cells. International Journal of Molecular Sciences, vol. 23: 1    

Surmeneva, M. A. , Khrapov, D. , Prosolov, K. , Kozadayeva, M. , Koptyug, A. , Volkova, A. , Paveleva, A. & Surmenev, R. A. (2022). The influence of chemical etching on porous structure and mechanical properties of the Ti6AL4V Functionally Graded Porous Scaffolds fabricated by EBM. Materials Chemistry and Physics, vol. 275  

Zullo, G. , Silvestroni, A. L. , Candiotto, G. , Koptyug, A. & Petrone, N. (2021). A novel multi-axial pressure sensor probe for measuring triaxial stress states inside soft materials. Sensors, vol. 21: 10    

Khrapov, D. , Kozadayeva, M. , Manabaev, K. , Panin, A. , Sjöström, W. , Koptyug, A. , Mishurova, T. , Evsevleev, S. & et al. (2021). Different approaches for manufacturing ti-6al-4v alloy with triply periodic minimal surface sheet-based structures by electron beam melting. Materials, vol. 14: 17    

Chudinova, E. , Koptyug, A. , Mukhortova, Y. , Pryadko, A. , Volkova, A. , Ivanov, A. , Plotnikov, E. , Khan, Y. & et al. (2021). Functionalization of additive-manufactured Ti6Al4V scaffolds with poly(allylamine hydrochloride)/poly(styrene sulfonate) bilayer microcapsule system containing dexamethasone. Materials Chemistry and Physics, vol. 273  

Botero, C. A. , Şelte, A. , Ramsperger, M. , Maistro, G. , Koptyug, A. , Bäckström, M. , Sjöström, W. & Rännar, L. (2021). Microstructural and mechanical evaluation of a cr-mo-v cold-work tool steel produced via electron beam melting (Ebm). Materials, vol. 14: 11  

Surmeneva, M. , Grubova, I. , Glukhova, N. , Khrapov, D. , Koptyug, A. , Volkova, A. , Ivanov, Y. , Cotrut, C. M. & et al. (2021). New Ti-35Nb-7Zr-5Ta Alloy Manufacturing by Electron Beam Melting for Medical Application Followed by High Current Pulsed Electron Beam Treatment. Metals, vol. 11: 7    

Popov, V. V. , Grilli, M. L. , Koptyug, A. , Jaworska, L. , Katz-Demyanetz, A. , Klobčar, D. , Balos, S. , Postolnyi, B. O. & et al. (2021). Powder bed fusion additive manufacturing using critical raw materials : A review. Materials, vol. 14: 4    

Evsevleev, S. , Mishurova, T. , Khrapov, D. , Paveleva, A. , Meinel, D. , Surmenev, R. , Surmeneva, M. , Koptyug, A. & et al. (2021). X-ray Computed Tomography Procedures to Quantitatively Characterize the Morphological Features of Triply Periodic Minimal Surface Structures. Materials, vol. 14: 11    

Botero Vega, C. A. , Ramsperger, M. , Selte, A. , Åsvik, K. , Koptioug, A. , Skoglund, P. , Roos, S. , Rännar, L. & et al. (2020). Additive Manufacturing of a Cold-Work Tool Steel using Electron Beam Melting. Steel Research International, vol. 19: 5, ss. 1-6.  

Koptioug, A. , Popov, V. V. J. , Botero Vega, C. A. , Jiménez-Piqué, E. , Katz-Demyanetz, A. , Rännar, L. & Bäckström, M. (2020). Compositionally-tailored steel-based materials manufactured by electron beam melting using blended pre-alloyed powders. Materials Science & Engineering, vol. 771  

Surmeneva, M. A. , Chudinova, E. A. , Chernozem, R. V. , Lapanje, A. , Koptyug, A. V. , Rijavec, T. , Loza, K. , Prymak, O. & et al. (2020). Development of a bone substitute material based on additive manufactured Ti6Al4V alloys modified with bioceramic calcium carbonate coating : Characterization and antimicrobial properties. Ceramics International, vol. 46: 46, ss. 25661-25670.  

Surmeneva, M. A. , Koptyug, A. , Khrapov, D. , Ivanov, Y. F. , Mishurova, T. , Evsevleev, S. , Prymak, O. , Loza, K. & et al. (2020). In situ synthesis of a binary Ti–10at% Nb alloy by electron beam melting using a mixture of elemental niobium and titanium powders. Journal of Materials Processing Technology, vol. 282  

Mieszkowska, A. , Beaumont, H. , Martocq, L. , Koptyug, A. , Surmeneva, M. A. , Surmenev, R. A. , Naderi, J. , Douglas, T. E. L. & et al. (2020). Phenolic-enriched collagen fibrillar coatings on titanium alloy to promote osteogenic differentiation and reduce inflammation. International Journal of Molecular Sciences, vol. 21: 17, ss. 1-15.    

Khrapov, D. , Koptioug, A. , Manabaev, K. , Léonard, F. , Mishurova, T. , Bruno, G. , Cheneler, D. , Loza, K. & et al. (2020). The impact of post manufacturing treatment of functionally graded Ti6Al4V scaffolds on their surface morphology and mechanical strength. Journal of Materials Research and Technology, vol. 9: 2, ss. 1866-1881.    

Chudinova, E. A. , Surmeneva, M. A. , Timin, A. S. , Karpov, T. E. , Wittmar, A. , Ulbricht, M. , Ivanova, A. , Loza, K. & et al. (2019). Adhesion, proliferation, and osteogenic differentiation of human mesenchymal stem cells on additively manufactured Ti6Al4V alloy scaffolds modified with calcium phosphate nanoparticles. Colloids and Surfaces B, vol. 176, ss. 130-139.  

Surmeneva, M. , Lapanje, A. , Chudinova, E. , Ivanova, A. , Koptioug, A. , Loza, K. , Prymak, O. , Epple, M. & et al. (2019). Decreased bacterial colonization of additively manufactured Ti6Al4V metallic scaffolds with immobilized silver and calcium phosphate nanoparticles. Applied Surface Science, vol. 480, ss. 822-829.  

Sukhovey, Y. G. & Kostolomova, E. (2019). Difference between the biologic and chronologic age as an individualized indicator for the skin care intensity selection : skin topography and immune system state studies, parameter correlations with age difference. Biomedical Dermatology, vol. 3  

Sukhovei, Y. , Kostolomova, E. , Unger, I. , Koptioug, A. & Kaigorodov, D. (2019). Difference between the biologic and chronologic age as an individualized indicator for the skin care intensity selection : skin topography and immune system state studies, parameter correlations with age difference. Biomedical Dermatology, vol. 3  

Petrone, N. , Candiotto, G. , Marzella, E. , Uriati, F. , Carraro, G. , Bäckström, M. & Koptyug, A. (2019). Feasibility of using a novel instrumented human head surrogate to measure helmet, head and brain kinematics and intracranial pressure during multidirectional impact tests. Journal of Science and Medicine in Sport, vol. 22: S1, ss. S78-S84.    

Laptev, R. , Pushilina, N. , Kashkarov, E. , Syrtanov, M. , Stepanova, E. , Koptyug, A. & Lider, A. (2019). Influence of beam current on microstructure of electron beam melted Ti-6Al-4V alloy. Progress in Natural Science, vol. 29: 4, ss. 440-446.    

Roos, S. , Botero Vega, C. A. , Danvind, J. , Koptioug, A. & Rännar, L. (2019). Macro- and Micromechanical Behavior of 316LN Lattice Structures Manufactured by Electron Beam Melting. Journal of materials engineering and performance (Print), vol. 28: 12, ss. 7290-7301.    

Norris, K. , Mishukova, O. I. , Zykwinska, A. , Colliec-Jouault, S. , Sinquin, C. , Koptioug, A. , Cuenot, S. , Kerns, J. G. & et al. (2019). Marine Polysaccharide-Collagen Coatings on Ti6Al4V Alloy Formed by Self-Assembly. Micromachines, vol. 10: 1    

Khrapov, D. , Surmeneva, M. , Koptioug, A. & Surmenev, R. (2019). Microstructure investigation of Ti-26Nb alloy manufactured from elemental powders by electron beam melting. Journal of Physics, Conference Series, : 1    

Radulov, I. A. , Popov, V. J. , Koptioug, A. , Maccari, F. , Kovalevsky, A. , Essel, S. , Gassmann, J. , Skokov, K. P. & et al. (2019). Production of net-shape Mn-Al permanent magnets by electron beam melting. Additive Manufacturing, vol. 30  

Popov, V. V. , Katz-Demyanetz, A. , Koptioug, A. & Bamberger, M. (2019). Selective electron beam melting of Al0.5CrMoNbTa0.5 high entropy alloys using elemental powder blend. Heliyon, vol. 5: 2    

Pushilina, N. , Panin, A. , Syrtanov, M. , Kashkarov, E. , Kudiiarov, V. , Perevalova, O. , Laptev, R. , Lider, A. & et al. (2018). Hydrogen-induced phase transformation and microstructure evolution for Ti-6Al-4V parts produced by electron beam melting. Metals, vol. 8: 5    

Pushilina, N. , Syrtanov, M. , Kashkarov, E. , Murashkina, T. , Kudiiarov, V. , Laptev, R. , Lider, A. & Koptioug, A. (2018). Influence of Manufacturing Parameters on Microstructure and Hydrogen Sorption Behavior of Electron Beam Melted Titanium Ti-6Al-4V Alloy. Materials, vol. 11: 5    

Olsén, J. , Shen, Z. , Liu, L. , Koptyug, A. & Rännar, L. (2018). Micro- and macro-structural heterogeneities in 316L stainless steel prepared by electron-beam melting. Materials Characterization, vol. 141, ss. 1-7.    

Douglas, T. E. L. , Hempel, U. , Żydek, J. , Vladescu, A. , Pietryga, K. , Kaeswurm, J. A. H. , Buchweitz, M. , Surmenev, R. A. & et al. (2018). Pectin coatings on titanium alloy scaffolds produced by additive manufacturing : Promotion of human bone marrow stromal cell proliferation. Materials letters (General ed.), vol. 227, ss. 225-228.  

Popov, V. , Koptioug, A. , Radulov, I. , Maccari, F. & Muller, G. (2018). Prospects of additive manufacturing of rare-earth and non-rare-earth permanent magnets. Procedia Manufacturing, vol. 21, ss. 100-108.    

Koptioug, A. , Rännar, L. , Bäckström, M. & Surmenev, R. (2017). Additive manufacturing in metal : technology advances generate new research challenges. Nanotechnology. Development and Applications - XXI Century, , ss. 12-24.

Zhong, Y. , Rännar, L. , Liu, L. , Koptyug, A. , Wikman, S. , Olsen, J. , Cui, D. & Shen, Z. (2017). Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications. Journal of Nuclear Materials, vol. 486, ss. 234-245.  

Zhong, Y. , Rännar, L. , Wikman, S. , Koptyug, A. , Liu, L. , Cui, D. & Shen, Z. (2017). Additive manufacturing of ITER first wall panel parts by two approaches : Selective laser melting and electron beam melting. Fusion engineering and design, vol. 116, ss. 24-33.  

Surmeneva, M. A. , Surmenev, R. , Chudinova, E. A. , Koptioug, A. , Tkachev, M. S. , Gorodzha, S. N. & Rännar, L. (2017). Fabrication of multiple-layered gradient cellular metal scaffold via electron beam melting for segmental bone reconstruction. Materials & design, vol. 133, ss. 195-204.  

Rännar, L. , Koptioug, A. , Olsén, J. , Saeidi, K. & Shen, Z. (2017). Hierarchical structures of stainless steel 316L manufactured by Electron Beam Melting. Additive Manufacturing, vol. 17, ss. 106-112.  

Chudinova, E. , Surmeneva, M. , Koptyug, A. , Selezneva, I. , Skoglund, P. , Syrtanov, M. & Surmenev, R. (2017). In Vitro Assessment of Hydroxyapatite Coating on the Surface of Additive Manufactured Ti6Al4V Scaffolds. Materials Science Forum, vol. 879, ss. 2444-2449.  

Vladescu, A. , Vranceanu, D. , Kulesza, S. , Ivanov, A. , Bramowicz, M. , Fedonnikov, A. , Braic, M. , Norkin, I. & et al. (2017). Influence of the electrolyte’s pH on the properties of electrochemically deposited hydroxyapatite coating on additively manufactured Ti64 alloy. Scientific Reports, vol. 7: 1    

Douglas, T. , Hempel, U. , Żydek, J. , Buchweitz, M. , Surmenev, R. , Surmeneva, M. , Koptioug, A. & Pamula, E. (2017). Pectin Coatings on Titanium Alloy Samples Produced by Additive Manufacturing : Promotion of Human Bone Marrow Stromal Cell Proliferation. Engineering of Biomaterials, vol. 143, ss. 43

Koptyug, A. & Burkett, B. (2016). Editorial for the special issue technology for disability sport. Sports Engineering, vol. 19: 3, ss. 139-139.    

Sukhovey, Y. G. , Koptyug, A. , Fisher, T. A. , Petrov, S. A. & Dotsenko, E. L. (2016). Functional Conjugation of the Different Regulatory Responses to the Stress Stimuli in Healthy Human Subjects. Open Journal of Applied Sciences, vol. 6, ss. 489-500.    

Koptyug, A. , Rännar, L. , Bäckström, M. & Shen, Z. (2016). New Metallurgy of Additive Manufacturing in Metal : Experiences from the Material and Process Development with Electron Beam Melting Technology (EBM). Materials Science Forum, vol. 879, ss. 996-1001.  

Koptyug, A. , Rännar, L. , Bäckström, M. & Cronskär, M. (2014). Additive Manufacturing for Medical and Biomedical Applications: Advances and Challenges. Materials Science Forum, , ss. 1286-1291.

Bujtar, P. , Simonovics, J. , Koptyug, A. , George, S. & Varadi, K. (2014). Emerging manufacturing bioengineering technologies 2: Scaffold designing experiment using titanium scaffolds. British Journal of Oral & Maxillofacial Surgery, vol. 52: 8, ss. e60-e61.  

Koptyug, A. , Bergemann, C. , Lange, R. , Jaggi, V. , Rännar, L. & Nebe, J. B. (2014). Osteoblast Ingrowth into Titanium Scaffolds made by Electron Beam Melting. Materials Science Forum, vol. 783-786, ss. 1292-1297.  

Sukhovey, Y. , Koptyug, A. , Petrov, S. A. , Dotsenko, E. L. & Fisher, T. A. (2014). Psycho-immune Partnership in the Dynamic Responses of Living Systems. International Journal of Life Science and Medical Research, vol. 4: 5, ss. 57-50.    

Koptyug, A. , Rännar, L. , Bäckström, M. , Fager Franzén, S. & Dérand, P. (2013). Additive Manufacturing Technology Applications Targeting Practical Surgery. International Journal of Life Science and Medical Research, vol. 3: 1, ss. 15-24.    

Troynikov, O. , Wardiningsih, W. , Koptyug, A. , Watson, C. & Oggiano, L. (2013). Influence of Material Properties and Garment Composition on Pressure Generated by Sport Compression Garments. Procedia Engineering, vol. 60, ss. 157-162.  

Koptyug, A. , Bäckström, M. , Tinnsten, M. & Carlsson, P. (2012). Cross-country ski vibrations and possible mechanisms of their influence on the free gliding. Procedia Engineering, vol. 34, ss. 473-478.    

Koptyug, A. , Bäckström, M. & Rännar, L. (2012). Tin Man- Making Spare Parts for Human Body. Science First Hand, vol. 44: 2, ss. 45-57.

Koptyug, A. , Mamontov, E. & Sukhovey, Y. (2011). Dynamic modeling of tumor development. Science First Hand, vol. 6: 42, ss. 44-51.

Koptyug, A. , Mamontov, E. & Sukhovey, Y. (2011). Towards personalised medicine : Problems of the drug therapy of cancer. Science First Hand, vol. 38: 2, ss. 91-97.

Piotrowska, M. , Mamontov, E. , Peterson, A. & Koptyug [Koptioug], A. (2008). A model and simulation for homeorhesis in the motion of a single individual. Mathematical and computer modelling, vol. 48: 7-8, ss. 1122-1143.  

Sidén, J. , Fein, M. , Koptyug, A. & Nilsson, H. (2008). Logos as RFID Tag Antennas. International Journal on Wireless and Optical Communications RFID special issue, vol. 5: 1, ss. 85-96.

Nilsson, H. , Sidén, J. , Olsson, T. , Jonsson, P. & Koptoiug, A. (2007). Evaluation of a printed patch antenna for robust microwave RFID tags. IET Microwaves, Antennas & Propagation, vol. 1: 3, ss. 776-781.  

Sidén, J. , Fein, M. , Koptioug, A. & Nilsson, H. (2007). Printed Antennas with Variable Conductive Ink Layer Thickness. IET Microwaves, Antennas & Propagation, vol. 1: 2, ss. 401-407.  

Koptyug, A. , Ananiev, L. & Äström, J. (2006). How to Make Perfect Snow. Science First Hand, : 1 (7), ss. 122-133.  

Bäckström, M. , Koptioug, A. & Tinnsten, M. (2006). People and Skis. Science-First Hand, : 3, ss. 110-125.  

Mamontov, E. , Psiuk-Maksymowicz, K. & Koptioug, A. (2006). Stochastic mechanics in the context of the properties of living systems. Mathematical and computer modelling, vol. 44: 7-8, ss. 595-607.  

Mamontov, E. , Koptioug, A. & Psiuk-Maksymowicz, K. (2006). The minimal, phase-transition model for the cell-number maintenance by the hyperplasia-extended homeorhesis. Acta Biotheoretica, vol. 54: 2, ss. 61-101.  

Olsson, T. , Sidén, J. & Koptioug, A. (2005). Robustness comparison of bow-tie and dipole antennas. IEE Proceedings - Microwaves Antennas and Propagation, vol. 151: 6, ss. 525-529.  

Olsson, T. & Koptioug, A. (2005). Statistical analysis of antenna robustness. IEEE Transactions on Antennas and Propagation, vol. 53: 1, ss. 566-568.  

Mamontov, E. , Psiuk-Maksymowicz, K. & Koptioug, A. (2005). What Stochastic Mechanics is Relevant to the Study of Living Systems?. Proceedings of the Latvian Academy of Sciences. Section B, vol. 59: 6 (641), ss. 255-262.  

Koptioug, A. , Foster, M. , Grigor’ev, I. , Lurie, D. , Khramtsov, V. , McCallum, S. , Panagiotelis, I. & Nicholson, I. (2003). In Vivo Detection of a pH-Sensitive Nitroxide in the Rat Stomach by Low-Field ESR-Based Techniques. Magnetic Resonance in Medicine, vol. 49: 3, ss. 558-567.  

Koptioug, A. (2002). Application of the Time-Variable Feedback to the Input Amplifiers of Pulse Magnetic Resonance Spectrometers : Theoretical Considerations. Applied Magnetic Resonance, vol. 22: 22/4, ss. 513-537.

Koptioug, A. , Reijerse, E. & Klaassen, A. A. K. (2002). Application of Time-Variable Feedback to the Input Amplifier of Pulse Magnetic Resonance Spectrometers : Experimental Studies. Applied Magnetic Resonance, vol. 22: 4, ss. 455-473.  

Hemp, J. , Sanderson, M. L. , Koptioug, A. , Liang, B. , Sweetland, D. J. & Al Rabeh, L. H. (2002). Problems in the Theory and Design of Electromagnetic Flowmeters for Dielectric Fluids : Part 1: Experimental Assessment of Static Charge Noise Levels and Signal-to-Noise Ratio. Flow Measurement and Instrumentation, vol. 13: 4, ss. 143-145.  

Koptioug, A. (1998). New Transmission Line Resonators for ESE. EPR Newsletter, vol. 9: 3, ss. 20-22.

Koptioug, A. , Reijerse, E. & Klaassen, A. K. (1997). New Transmission-Line Resonator for Pulsed EPR. Journal of magnetic resonance, : 125, ss. 369-371.  

Koptyug, A. (1997). Optical Detection of EPR Spectra of Radical-Ion Pairs in Weak Magnetic Fields. Doklady Akademii Nauk, vol. 297: 6, ss. 1414-1417.  

Koptyug, A. & Sörman, E. (1994). A Method of Altering the Modulation Type and frequency of Commercial ESR Spectrometers :  . Measurement science and technology, vol. 5: 7, ss. 797-780.  

Koptyug, A. & Grishin, Y. (1994). S-band magnetron-based accessory for optical detection of ESR spectra of radiation-induced radical-ion pairs. Measurement science and technology, vol. 5: 4, ss. 363-370.  

Koptioug, A. , Antzutkin, O. , Lindgren, M. & Lund, A. (1993). Optically detected ESR (OD ESR) of radical-ion pairs in coloured solutions : Observation of transient Trans-Azobenzene Radical Cation. Applied Magnetic Resonance, vol. 5: 1, ss. 77-86.  

Morozov, V. A. , Koptyug, A. , Doktorov, A. B. & Molin, Y. (1992). Dynamic theory of optically detected electron-nuclear double resonance of radical pairs (OD ENDOR) in liquid solutions. Chemical Physics, vol. 165: 2-3, ss. 297-312.

Morozov, V. A. , Antzutkin, O. , Koptyug, A. & Doktorov, A. B. (1991). Multiquantum resonances in low-field optically detected ESR of radical-ion pairs. Molecular Physics, vol. 73: 3, ss. 517-540.  

Koptioug, A. , Saik, V. , Anisimov, O. , Molin, Y. & Antzutkin, O. (1990). Effect of External Magnetic Fields and Resonance Radio frequency Radiation on Radical Reactions. Physica. B, Condensed matter, vol. 164: 1-2, ss. 200-204.  

Koptioug, A. , Saik, V. , Anisimov, O. & Molin, Y. (1990). Quantum beats in singlet-triplet transitions of radical pairs induced by a radio-frequency field. Chemical Physics Letters, vol. 165: 2-3, ss. 142-145.  

Koptyug, A. , Saik, V. , Anisimov, O. & Molin, Y. (1989). Spin-locking in concentration-narrowed OD ESR spectra. Chemical Physics, vol. 138: 1, ss. 173-178.  

Koptyug, A. (1988). Weak Field ESR Spectrometer. Transactions of Siberian Branch of the USSR Academy of Sciences, vol. 1, ss. 121-124.

Koptyug, A. (1987). Optical Detection of the Radical-Ion Pair Spectra in Weak Magnetic Fields. Doklady Akademii Nauk, vol. 297: 6, ss. 1414-1418.  

Artiklar, forskningsöversikter

Popov, V. V. J. , Muller-Kamskii, G. , Katz-Demyanetz, A. , Kovalevsky, A. , Usov, S. , Trofimcow, D. , Dzhenzhera, G. & Koptioug, A. (2019). Additive manufacturing to veterinary practice : recovery of bony defects after the osteosarcoma resection in canines. BIOMEDICAL ENGINEERING LETTERS, vol. 9: 1, ss. 97-108.    

Katz-Demyanetz, A. , Popov, V. V. J. , Kovalevsky, A. , Safranchik, D. & Koptioug, A. (2019). Powder-bed additive manufacturing for aerospace application : Techniques, metallic and metal/ceramic composite materials and trends. MANUFACTURING REVIEW, vol. 6    

Greenslade, D. , Koptyug, A. & Symons, M. (1995). Aspects of low-frequency low-field electron spin resonance. Royal Society of Chemistry. Annual Reports on the Progress of Chemistry. Section C: Physical Chemistry, vol. 92, ss. 3-21.  

Kapitel i böcker, del av antologier

Koptioug, A. & Bäckström, M. (2023). Body Part Surrogates for Medicine, Comfort and Safety Applications. I Advances in 3D Printing. Rijeka : IntechOpen.  

Carlsson, P. , Ainegren, M. , Tinnsten, M. , Sundström, D. , Esping, B. , Koptioug, A. & Bäckström, M. (2015). Cross-Country Ski. I The Engineering Approach to Winter Sports. Springer. S. 107-152.    

Konferensbidrag

Zullo, G. , Baldoin, E. , Koptyug, A. , Bäckström, M. & Petrone, N. (2023). Advances in the development of a instrumented head surrogate for brain injury investigation. I Convegno Nazionale di Bioingegneria.

Hosseini, S. B. , Mallipeddi, D. , Holmberg, J. , Rännar, L. , Koptyug, A. , Sjöström, W. , Krajnik, P. & Klement, U. (2022). Comparison of machining performance of stainless steel 316L produced by selective laser melting and electron beam melting. I Procedia CIRP.. S. 72--77.  

Koptyug, A. , Botero Vega, C. A. , Sjöström, W. , Bäckström, M. , Rännar, L. & Tremsin, A. (2021). Electron Beam Melting: from Shape Freedom to Materials Properties Control at Macro- and Microscale. I Proceedings of the THERMEC 2020, Graz, Austria.. S. 755--759.  

Ainegren, M. , Michel, F. , Klauer, R. , Kopyug, A. , Bäckström, M. , Samuelsson, D. , Ahnesjö, M. & Litzenberger, S. (2020). A Study of Skin-Close Heat and Moisture with Different Types of Backpacks in Cycling. I The 13th Conference of the International Sports Engineering Association. (MDPI Proceedings)  

Koptyug, A. , Bäckström, M. & Olsson, V. (2020). Comparing the Performance of the Biathlon Rifles with Wooden and Titanium Frames. I Proceedings of The 13th Conference of the International Sports Engineering Association. (MDPI Proceedings)    

Katz-Demyanetz, A. , Koptyug, A. & Popov, V. V. (2020). In-situ Alloying as a Novel Methodology in Additive Manufacturing. I 2020 IEEE 10th International Conference Nanomaterials : Applications and Properties", NAP 2020.  

Botero, C. , Bäckström, M. , Rännar, L. , Roos, S. , Koptyug, A. , Åsvik, K. , Şelte, A. & Ramsperger, M. (2019). Additive Manufacturing of a cold work steel using Electron Beam Melting. I Proceedings of Conference:  Tooling 2019.

Chudinova, E. , Surmeneva, M. , Koptioug, A. , Sokolova, V. , Prymak, O. , Bouckercha, S. , Epple, M. & Surmenev, R. (2019). Determination of the properties and loading efficiency of encapsulated BSA-FITC and dexamethasone for drug delivery systems. I IOP Conference Series : Materials Science and Engineering.    

Koptyug, A. , Botero, C. , Sjöström, W. , Jimenez-Pique, E. , Şelte, A. , Asvik, K. , Rännar, L. & Bäckström, M. (2019). Steel-based functionally gradient materials obtained via Electron Beam Melting. I Proc. Alloys for Additive Manufacturing Symposium AAMS2019.

Chudinova, E. , Surmeneva, M. , Koptioug, A. , Loza, K. , Prymak, O. , Epple, M. & Surmenev, R. (2019). Surface modification of Ti6Al4V alloy scaffolds manufactured by electron beam melting. Paper presented at the 15th International Conference of Students and Young Scientists on Prospects of Fundamental Sciences Development, PFSD 2018, 24 April 2018 through 27 April 2018    

Khrapov, D. , Surmeneva, M. , Koptioug, A. , Evsevleev, S. , Lé Onard, F. , Bruno, G. & Surmenev, R. (2019). X-ray computed tomography of multiple-layered scaffolds with controlled gradient cell lattice structures fabricated via additive manufacturing. Paper presented at the 15th International Conference of Students and Young Scientists on Prospects of Fundamental Sciences Development, PFSD 2018, 24 April 2018 through 27 April 2018    

Petrone, N. , Carraro, G. , Dal Castello, S. , Broggio, L. , Koptioug, A. & Bäckström, M. (2018). A Novel Instrumented Human Head Surrogate For The Impact Evaluation Of Helmets. I Proceedings, Volume 2, ISEA 2018.. S. 269-    

Koptioug, A. , Bäckström, M. , Botero Vega, C. A. , Popov, V. & Chudinova, E. (2018). Developing new materials for Electron Beam Melting : experiences and challenges. Paper presented at the THERMEC'2018 International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, Paris, France July 8-13, 2018  

Botero, C. A. , Koptyug, A. , Jiménez-Piqué, E. & Rännar, L. (2018). Microstructure and nanomechanical behavior of modified 316L-based materials fabricated using EBM. Paper presented at the 2:nd International Conference on Electron Beam Additive Manufacturing, Nuremberg, Germany, April 11, 2018

Botero Vega, C. A. , Jiménez-Piqué, E. , Roos, S. , Skoglund, P. , Koptioug, A. , Rännar, L. & Bäckström, M. (2018). Nanoindentation: a suitable tool in metal Additive Manufacturing. Paper presented at the Materials Science & Technology, MS&T 2018, October 14-18, Columbus, USA

Skoglund, P. , Botero Vega, C. A. , Koptioug, A. , Rännar, L. & Bäckström, M. (2018). Possibility of the “cold start” of the build in Electron Beam Melting. Paper presented at the Materials Science & Technology, MS&T 2018, October 14-18, Columbus, USA

Petrone, N. , Giacomin, M. , Koptioug, A. & Bäckström, M. (2018). Racing Wheels’ Effect on Drag/Side Forces Acting on a Cyclist at Sportstech-Miun Wind Tunnel. I Proceedings, Volume 2, ISEA 2018.. S. 210-    

Popov, V. , Koptyug, A. , Skokov, K. , Radulov, I. & Gutfleisch, O. (2018). Selective electron beam melting of non-rare-earth MnAl-C permanent magnets. I Proceedings: 2d International Conference on Electron Beam Additive Manufacturing, EBAM 2018.. S. 21-

Koptioug, A. , Bäckström, M. , Ainegren, M. & Nilsson, K. (2018). Studying Moisture Transport Trough "Active" Fabrics Using Humidity-Temperature Sensor Nodes. I Proceedings, Volume 2, ISEA 2018 : .. S. 230-    

Olsén, J. , Koptioug, A. , Rännar, L. , Saedi, K. & Shen, Z. J. (2018). The Heterogenic Structure Formed During Electron Beam Melting of 316L Stainless Steel. Paper presented at the International Conference on Powder Metallurgy and Particulate Materials, (PowderMet), San Antonio, USA, June 17-20, 2018

Koptioug, A. , Rännar, L. , Botero Vega, C. A. , Bäckström, M. & Popov, V. (2018). Unique material compositions obtained by Electron beam melting of blended powders. I Euro PM2018 Proceedings.

Koptioug, A. , Bäckström, M. & Rännar, L. (2017). 3D-printing: a future “magic wand” for global manufacturing. How can we benefit from it today for sports and health care?. I Proceedings of the 5th International Congress on Sport Sciences Research and Technology Support, icSPORTS.

Roos, S. , Rännar, L. , Koptioug, A. & Danvind, J. (2017). Characterization of 316ln lattice structures fabricated via electron beam melting. I Materials Science and Technology Conference and Exhibition 2017, MS and T 2017.. S. 336--343.  

Koptyug, A. , Bäckstöm, M. & Petrone, N. (2017). Developing an Instrumented Physical Model of the Human Head for Studying Concussion Mechanisms. I Proceedingd of iSSs-  (International Ski Safety Society) : The Ski Trauma and Ski Safety Congress.

Koptyug, A. , Rännar, L. & Bäckström, M. (2017). New Materials for Additive Manufacturing in Metal: Back to Basics?. Paper presented at the Frontiers in Materials Processing Applications, Research and Technology, FiMPART-2017, Bordeaux, France, July 9-12, 2017

Bäckström, M. , Carlsson, P. , Danvind, J. , Koptioug, A. , Sundström, D. & Tinnsten, M. (2016). A New Wind Tunnel Facility Dedicated to Sports Technology Research and Development. I Procedia Engineering. (Procedia Engineering). S. 62--67.    

Fisher, T. A. , Petrov, S. A. , Koptyug, A. , Sukhovey, Y. G. & Dotsenko, E. L. (2016). A way to health through psycho-immunological wellbeing : Example of Indigenous People of Russian North. I Proc. IIId Intl Conference "Psychological Health of the Person: Life Resource and Life Potential".  

Chudinova, E. , Surmeneva, M. , Koptioug, A. , Skoglund, P. & Surmenev, R. (2016). Additive manufactured Ti6Al4V scaffolds with the RF-magnetron sputter deposited hydroxyapatite coating. I Journal of Physics: Conference Series.    

Leicht, A. , Vattur Sundaram, M. , Yao, Y. , Hryha, E. , Nyborg, L. , Rännar, L. , Koptyug, A. , Frisk, K. & et al. (2016). As-HIP Microstructure of EBM Fabricated Shell Components. I Proceedings of Wolrd PM2016 - AM - Properties of Lightweight Materials ll.

Vranceanu, D. , Koptioug, A. , Vladescu, A. , Braic, M. , Surmenev, R. , Surmeneva, M. , Berbecaru, A. & Cotrut, C. (2016). Biofunctionalization of porous Ti6Al4V with HAp coatings obtained by electrochemical assisted deposition. I Proc. 7 th International Conference “Biomaterials, Tissue Engineering & Medical Devices” BIOMMEDD’2016.

Frisk, K. , Rännar, L. , Koptyug, A. , Petterson, N. , Persson, D. , Leicht, A. , Vattur Sundaram, M. , Hryha, E. & et al. (2016). Characterisation Of EBM-built Shelled Samples of Ti6Al4V Compacted by HIP. Paper presented at the World Powder Metallurgy Congress, Hamburg, Germany, October 9-13, 2016

Koptyug, A. , Ainegren, M. , Bäckström, M. , Schieber, E. & Persson, J. (2016). Possibility of modern humidity sensor application in the studies ofmoisture transport through the sports and outdoor garments. I icSPORTS 2016 - Proceedings of the 4th International Congress on Sport Sciences Research and Technology Support. Portugal : (Scitepress Digital Library). S. 51--58.  

Chudinova, E. , Surmeneva, M. , Koptioug, A. , Sharonova, A. , Loza, K. & Surmenev, R. (2016). Surface modification of additive manufactured Ti6Al4V alloy with Ag nanoparticles : Wettability and surface morphology study. I IOP Conference Series : Materials Science and Engineering.    

Surmenev, R. , Surmeneva, M. , Chudinova, E. , Koptioug, A. , Melnikova, E. , Skoglund, P. , Prymak, O. , Epple, M. & et al. (2016). Surface modification of additive manufactured titanium with CaP, Ag nanoparticles and ultrathin HA coating. I Proceedings BIOMAH-2016.

Rännar, L. , Koptyug, A. , Bäckström, M. & Jönsson, A. (2016). Water jet polishing of materials manufactured with electron beam melting technology. Paper presented at the World Powder Metallurgy Congress, Hamburg, Germany, 9-13 October, 2016

Koptyug, A. & Ainegren, M. (2015). Experimental measurement of rifle dynamics during the range shooting of biathlon weapons. I Procedia Engineering : The Impact of Tecnology on Sport VI.. S. 349--354.    

Chudinova, E. , Surmeneva, M. , Koptyug, A. , Skoglund, P. , Sharanova, A. , Loza, K. , Epple, M. & Surmenev, R. (2015). Hydroxyapatite coating and silver nanoparticles assemblies on additively manufactured Ti6Al4V scaffolds. Paper presented at the Local conference, Tomsk Polytechnic University, Tomsk, Russia  

Surmeneva, M. , Chudinova, E. , Syrtanov, M. , Koptyug, A. & Surmenev, R. (2015). Investigation of the HA film deposited on the porous Ti6Al4V alloy prepared via additive manufacturing. I IOP Conference Series : Materials Science and Engineering. IOP :    

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2014). Gliding-induced ski vibrations : Approaching proper modeling. I Procedia Engineering. (Procedia Engineering). S. 539--544.    

Koptyug, A. , Rännar, L. & Bäckström, M. (2014). Multiscale surface structuring of the biomedical implants manufactured in Electron Beam Melting technology : Demands, advances and challenges. I Proceedings of the 5:th International Conference in Additive Technologies.. S. 37--42.

Koptyug, A. , Rännar, L. , Bäckström, M. & Langlet, r. (2013). Bulk Metallic Glass Manufacturing Using Electron Beam Melting. I Proceedings from Additive Manufacturing & 3D Printing, Nottingham, UK, July 2013. Nottingham, UK :

Bäckström, M. , Tinnsten, M. , Koptyug, A. , Rännar, L. , Carlsson, P. , Danvind, J. & Wiklund, H. (2013). Sports Technology Education at Mid Sweden University. I 6TH ASIA-PACIFIC CONGRESS ON SPORTS TECHNOLOGY (APCST). (Procedia Engineering). S. 214--219.    

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2013). Studies into the Mechanisms of the Cross-country Ski Vibrations and Possible Models of the Phenomenon. I 6TH ASIA-PACIFIC CONGRESS ON SPORTS TECHNOLOGY (APCST). (Procedia Engineering). S. 40--45.  

Neubauer, B. , Sidén, J. , Gulliksson, M. , Olofsson, C. , Koptyug, A. , Nilsson, H. & Norgren, M. (2012). A new thermally activated battery cell-based forest fire detection and monitoring system. I WIT Transactions on Ecology and the Environment. Southampton : (Ecology and the Environment). S. 113--124.  

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2012). Cross-country Ski Vibrations : Loaded Vs Unloaded Skis. Paper presented at the 2nd International Congress on Science and Nordic Skiing, May 28 - 31, 2012, Vuokatti, Finland

Koptyug, A. , Rännar, L. , Backstrom, M. & Klingvall, R. (2012). Electron Beam Melting : Moving from Macro- to Micro- and Nanoscale. I Materials Science Forum. Switzerland : (Materials Science Forum). S. 532--537.  

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2012). Laboratory Setup for the Cross Country Ski Vibrations Measurements: Methodology and First Results. Paper presented at the 2nd International Congress on Science and Nordic Skiing, May 28 - 31, 2012, Vuokatti, Finland

Koptyug, A. & Kuzmin, L. (2011). Experimental field studies of the cross-country ski running surface interaction with snow. I Procedia Engineering. (Procedia Engineering). S. 23--29.    

Cronskär, M. , Rännar, L. , Bäckström, M. & Koptioug, A. (2008). Application of electron beam melting to titanium hip stem Implants. Paper presented at the International Conference on Additive Technologies

Sidén, J. , Koptioug, A. , Gulliksson, M. & Nilsson, H. (2007). An Action Activated and Self Powered Wireless Forest Fire Detector. I IFIP International Federation for Information Processing. (International federation for information processing). S. 47--58.  

Sidén, J. , Nilsson, H. , Koptyug [Koptioug], A. & Olsson, T. (2006). A Distanced RFID Dipole for a Metallic Supply Chain Label. I 2006 IEEE Antennas and Propagation Society International Symposium, 9-14 July 2006 , Albuquerque, NM, USA.. S. 3229--3232.

Mamontov, E. & Koptioug, A. (2006). Nonsearch paradigm for large-scale parameter-identification problems in dynamical systems related to oncogenic hyperplasia. I Proceedings of the 22nd IFIP TC7 Conference held from July 18–22, 2005, in Turin, Italy.. S. 269--278.  

Nilsson, H. , Sidén, J. , Unander, T. , Olsson, T. , Jonsson, P. , Koptioug, A. & Gulliksson, M. (2005). Characterization of moisture sensor based on printed Carbon-Zinc energy cell. I Polytronic 2005: 5th International Conference on Polymers and Adhesives in Microelectronics and Photonics - Proceedings. Piscataway, NJ : . S. 82--85.  

Jonsson, P. , Nilsson, H. & Koptioug, A. (2005). Dual band Fraktal Antenna for RFID Applications.

Jonsson, P. , Nilsson, H. & Koptoiug, A. (2005). Genetically Engineered Dual band Antenna for RFID Applications.

Sidén, J. , Olsson, T. , Koptioug, A. & Nilsson, H. (2005). Reduced Amount of Conductive Ink with Gridded Printed Antennas. I Polytronic 2005: 5th International Conference on Polymers and Adhesives in Microelectronics and Photonics - Proceedings. Piscataway, NJ : . S. 86--89.  

Sidén, J. , Koptioug, A. & Gulliksson, M. (2004). The "Smart" Diaper Moisture Detection System. I 2004 IEEE MITT-S International Microwave Symposium Digest, Jun 6-11 2004, Fort Worth, TX, United States.. S. 659--662.  

Olsson, T. , Jonsson, P. , Sidén, J. , Koptioug, A. & Gulliksson, M. (2003). Deformed Bow-tie antenna. I Antenn 03. Nordic Antenna Symposium, 13-15 May 2003 , Kalmar, Sweden.. S. 183--188.

Koptioug, A. , Jonsson, P. , Sidén, J. , Olsson, T. & Gulliksson, M. (2003). On the behavior of printed RFID tag antennas, using conductive paint. I Antenn 03. Nordic Antenna Symposium, 13-15 May 2003 , Kalmar, Sweden.. S. 371--374.

Sidén, J. , Jonsson, P. & Koptioug, A. (2003). Printed RFID tag antennas with minimal performance degradation when bent. I Proceedings of Asia Pacific Microwave Conference 2003, APMC'03, Seoul, South Korea, November 4-7, 2003..

Koptioug, A. & Hesselbom, H. (2003). Some Aspects of Modelling of Dense High Speed TL Interconnects for Printed Circuit Boards. I GigaHertz 2003 : Proceedings from the Seventh Symposium, November 4–5, 2003, Linköping, Sweden. Linköping : (Linköping Electronic Conference Proceedings)

Manuskript

Sidén, J. , Fein, M. , Koptioug, A. & Nilsson, H. On the Efficiency of Printed RFID Antennas : (skriven för IEEE Transactions on Electron Devices).

Jonsson, P. , Nilsson, H. & Koptioug, A. Using Fractals to Obtain Antennas with High Directivity.

Patent

Bäckström, M. & Koptyug, A. (2016). Method and system for generating a driver support product for a racing driver .

Nilsson, H. , Sidén, J. & Koptyug, A. (2008). Sensoranordning med RFID-enheter .

Carle, F. & Koptioug, A. (2007). Portable rescue device and a method for locating such a device .

Nilsson, H. , Koptioug, A. , Gulliksson, M. , Sidén, J. , Olsson, T. & Jonsson, P. (2004). Moisture Sensor System .

Sidan uppdaterades 2023-09-21