Publikationer Komplexa material

Spara favorit 30 jun juni 2016

Publikationer Komplexa material

Artiklar i tidskrifter

Andres, B. , Dahlström, C. , Blomquist, N. , Norgren, M. & Olin, H. (2018). Cellulose binders for electric double-layer capacitor electrodes : The influence of cellulose quality on electrical properties. Materials & design, vol. 141, ss. 342-349.  

Kumar, V. , Forsberg, S. , Engström, A. , Nurmi, M. , Dahlström, C. & Toivakka, M. (2017). Conductive carbon-nanocellulose coatings on paper. TAPPI Journal, vol. 16: 6, ss. 310-311.

Kumar, V. , Forsberg, S. , Engström, A. , Nurmi, M. , Andres, B. , Dahlström, C. & Toivakka, M. (2017). Conductive nanographite-nanocellulose coatings on paper. Flexible And Printed Electronics, vol. 2: 3  

Eivazihollagh, A. , Bäckström, J. , Dahlström, C. , Carlsson, F. , Ibrahem, I. , Lindman, B. , Edlund, H. & Norgren, M. (2017). One-pot synthesis of cellulose-templated copper nanoparticles with antibacterial properties. Materials letters (General ed.), vol. 187, ss. 170-172.    

Mattsson, A. & Uesaka, T. (2017). Time-dependent breakdown of fiber networks : Uncertainty of lifetime. Physical review. E, vol. 95: 5  

Alimadadi, M. & Uesaka, T. (2016). 3D-oriented fiber networks made by foam forming. Cellulose (London), vol. 23: 1, ss. 661-671.    

Uesaka, T. (2016). Complex Matters : Things that matter. Nordic Pulp & Paper Research Journal, vol. 31: 2, ss. 213-218.

Andres, B. , Engström, A. , Blomquist, N. , Forsberg, S. , Dahlström, C. & Olin, H. (2016). Electrode Mass Balancing as an Inexpensive and Simple Method to Increase the Capacitance of Electric Double-Layer Capacitors. PLoS ONE, vol. 11: 9, ss. 1-12.    

Forsberg, V. , Zhang, R. , Joakim, B. , Dahlström, C. , Andres, B. , Norgren, M. , Andersson, M. , Hummelgård, M. & et al. (2016). Exfoliated MoS2 in Water without Additives. PLoS ONE, vol. 11: 4    

Forsberg, V. , Zhang, R. , Andersson, H. , Bäckström, J. , Dahlström, C. , Norgren, M. , Andres, B. & Olin, H. (2016). Liquid Exfoliation of Layered Materials in Water for Inkjet Printing. Journal of Imaging Science and Technology, vol. 60: 4, ss. 1-7.  

Osong, S. H. , Dahlström, C. , Forsberg, S. , Andres, B. , Engstrand, P. , Norgren, S. & Engström, A. (2016). Nanofibrillated cellulose/nanographite composite films. Cellulose (London), vol. 23: 4, ss. 2487-2500.  

Mattsson, A. & Uesaka, T. (2015). Time-dependent statistical failure of fiber networks. Physical Review E. Statistical, Nonlinear, and Soft Matter Physics, vol. 92: 4    

Andres, B. , Forsberg, S. , Dahlström, C. , Blomquist, N. & Olin, H. (2014). Enhanced electrical and mechanical properties of nanographite electrodes for supercapacitors by addition of nanofibrillated cellulose. Physica status solidi. B, Basic research, vol. 251: 12, ss. 2581-2586.  

Wiklund, H. S. & Uesaka, T. (2013). Microfluidics of imbibition in random porous media. Physical Review E. Statistical, Nonlinear, and Soft Matter Physics, vol. 87: 2, ss. 023006    

Zhang, R. , Andersson, H. , Andersson, M. , Andres, B. , Edlund, H. , Edström, P. , Edvardsson, S. , Forsberg, S. & et al. (2013). Soap-film coating : High-speed deposition of multilayer nanofilms. Scientific Reports, vol. 3, ss. Art. no. 1477    

Kulachenko, A. & Uesaka, T. (2012). Direct simulations of fiber network deformation and failure. Mechanics of materials (Print), vol. 51, ss. 1-14.  

Wiklund, H. & Uesaka, T. (2012). Edge-wicking : Micro-fluidics of two-dimensional liquid penetrationinto porous structures. Nordic Pulp & Paper Research Journal, vol. 27: 2, ss. 403-408.    

Dahlström, C. & Uesaka, T. (2012). Microstructure Variations in Paper Coating : Direct Observations. Industrial & Engineering Chemistry Research, vol. 51: 24, ss. 8246-8252.  

Wiklund, H. & Uesaka, T. (2012). Simulations of shearing of capillary bridges. Journal of Chemical Physics, vol. 136: 9, ss. Art. no. 094703  

Uesaka, T. & Juntunen, J. (2012). Time-dependent, stochastic failure of paper and box. Nordic Pulp & Paper Research Journal, vol. 27: 2, ss. 370-374.      

Wiklund, H. , Lindström, S. B. & Uesaka, T. (2011). Boundary condition considerations in lattice Boltzmann formulations of wetting binary fluids. Computer Physics Communications, vol. 182: 10, ss. 2192-2200.  

Dahlström, C. , Allem, R. & Uesaka, T. (2011). New Method for Characterizing Paper Coating Structures Using Argon Ion Beam Milling and Field Emission Scanning Electron Microscopy. Journal of Microscopy, vol. 241: 2, ss. 179-187.  

Holmvall, M. , Lindström, S. & Uesaka, T. (2011). Simulation of two-phase flow with moving immersed boundaries. International Journal for Numerical Methods in Fluids, vol. 67: 12, ss. 2062-2080.  

Holmvall, M. , Uesaka, T. , Drolet, F. & Lindström, S. (2011). Transfer of a microfluid to a stochastic fibre network. Journal of Fluids and Structures, vol. 27: 7, ss. 937-946.  

Edvardsson, S. & Uesaka, T. (2010). System dynamics of the open draw with web adhesion: Particle approach. Journal of applied mechanics, vol. 77: 2, ss. 1-11.  

Lindström, S. & Uesaka, T. (2009). A numerical investigation of the rheology of sheared fiber suspensions. Physics of fluids, vol. 21: 8, ss. 083301  

Dahlström, C. & Uesaka, T. (2009). New Insights into Coating Uniformity and Base Sheet Structures. Industrial & Engineering Chemistry Research, vol. 48: 23, ss. 10472-10478.  

Lindström, S. & Uesaka, T. (2008). Particle-level simulation of forming of the fiber network in papermaking. International Journal of Engineering Science, vol. 46: 9, ss. 858-876.  

Holmvall, M. & Uesaka, T. (2008). Print Uniformity of Corrugated Board in Flexo Printing: Effects of Corrugated Board and Halftone Dot Deformations.. Packaging technology & science, vol. 21: 7, ss. 385-394.  

Lindström, S. & Uesaka, T. (2008). Simulation of semidilute suspensions of non-Brownian fibres in shear flow. Journal of Chemical Physics, vol. 128: 2, ss. 024901  

Holmvall, M. & Uesaka, T. (2008). Striping of Corrugated Board in Full-tone Flexo Post-Printing. Appita journal, vol. 61: 1, ss. 35-40.

Kulachenko, A. , Gradin, P. & Uesaka, T. (2007). Basic mechanisms of fluting formation and retention in paper. Mechanics of materials (Print), vol. 39: 7, ss. 643-663.  

Holmvall, M. & Uesaka, T. (2007). Nip Mechanics of Flexo Post-Printing on Corrugated Board.. Journal of composite materials, vol. 41: 17, ss. 2129-2145.  

Deng, X. , Ferahi, M. & Uesaka, T. (2007). Pressroom Runnability : A Comprehensive Analysis of Press Room and Mill Database. Pulp & paper Canada, vol. 108: 2, ss. 42-51.

Lindström, S. & Uesaka, T. (2007). Simulation of the motion of flexible fibres in viscous fluid flow. Physics of fluids, vol. 19: 11  

Uesaka, T. (2005). Principal Factors Controlling Web Breaks in Pressrooms : quantitative evaluation. Appita journal, vol. 58: 6, ss. 425-432.

Vidal, D. , Zou, X. & Uesaka, T. (2004). Modelling coating structure development : Monte-Carlo deposition of particles with irregular shapes. Nordic Pulp and Paper Research Journal, vol. 19: 4, ss. 420-427.    

Hristopulos, D. & Uesaka, T. (2004). Structural disorder effects on the tensile strength distribution of heterogeneous brittle materials with emphasis on fiber networks. Physical Review B. Condensed Matter and Materials Physics, vol. 70: 6, ss. 64108  

Provatas, N. & Uesaka, T. (2003). Modelling paper structure and paper-press interactions. Journal of Pulp and Paper Science (JPPS), vol. 29: 10, ss. 332-340.

Zou, X. , Uesaka, T. & Norayer, G. (1996). Prediction of paper permanence by accelerated aging .1. Kinetic analysis of the aging process. Cellulose (London), vol. 3: 4, ss. 243-267.

Zou, X. , Uesaka, T. & Gurnagul, N. (1996). Prediction of paper permanence by accelerated aging .2. Comparison of the predictions with natural aging results. Cellulose (London), vol. 3: 4, ss. 269-279.

Zou, X. , Gurnagul, N. , Uesaka, T. & Bouchard, J. (1994). ACCELERATED AGING OF PAPERS OF PURE CELLULOSE - MECHANISM OF CELLULOSE DEGRADATION AND PAPER EMBRITTLEMENT. Polymer degradation and stability, vol. 43: 3, ss. 393-402.

Uesaka, T. (1994). GENERAL FORMULA FOR HYGROEXPANSION OF PAPER. Journal of Materials Science, vol. 29: 9, ss. 2373-2377.

Nanri, Y. & Uesaka, T. (1993). DIMENSIONAL STABILITY OF MECHANICAL PULPS - DRYING SHRINKAGE AND HYGROEXPANSIVITY. TAPPI Journal, vol. 76: 6, ss. 62-66.

Gurnagul, N. , Howard, R. , Zou, X. , Uesaka, T. & Page, D. (1993). THE MECHANICAL PERMANENCE OF PAPER - A LITERATURE-REVIEW. Journal of Pulp and Paper Science (JPPS), vol. 19: 4, ss. J160-J166.

Zou, X. , Gurnagul, N. & Uesaka, T. (1993). THE ROLE OF LIGNIN IN THE MECHANICAL PERMANENCE OF PAPER .1. EFFECT OF LIGNIN CONTENT. Journal of Pulp and Paper Science (JPPS), vol. 19: 6, ss. J235-J239.

Uesaka, T. (1991). DIMENSIONAL STABILITY OF PAPER - UPGRADING PAPER PERFORMANCE IN END USE. Journal of Pulp and Paper Science (JPPS), vol. 17: 2, ss. J39-J46.

Uesaka, T. , Murakami, K. & Imamura, R. (1979). BIAXIAL TENSILE BEHAVIOR OF PAPER. TAPPI Journal, vol. 62: 8, ss. 111-114.

Doktorsavhandlingar, sammanläggningar

Dahlström, C. (2012). Quantitative microscopy of coating uniformity. Diss. (Sammanläggning) Sundsvall : Mid Sweden University, 2012 (Mid Sweden University doctoral thesis : 129)  

Kapitel i böcker, del av antologier

Dahlström, C. (2013). Sample Preparation Using Argon Ion Beam Milling. I Argon: Production, Characteristics and Applications. Hauppauge, NY : Nova Science Publishers, Inc.. S. 223-240.

Uesaka, T. (2012). Mechanics in printing nip for paper and board. I Mechanics of paper products. Berlin : Mouton de Gruyter. S. 181-193.

Uesaka, T. (2012). Statistical aspects of failure of paper and board. I Mechanics of paper products. Berlin : Mouton de Gruyter. S. 139-159.

Uesaka, T. (2012). Web dynamics in paper transport systems. I Engineering Mechanics of Paper and Board Products. Berlin : Mouton de Gruyter. S. 93-110.

Konferensbidrag

Kumar, V. , Forsberg, S. , Engström, A. , Nurmi, M. , Dahlström, C. & Toivakka, M. (2017). Conductive carbon-nanocellulose coatings on paper. I Paper Conference and Trade Show, PaperCon 2017 : Renew, Rethink, Redefine the Future.. S. 26--35.

Mattsson, A. & Uesaka, T. (2017). Creep failure of fibre network : The Origin of uncertainty. Paper presented at the Svenska mekanikdagar, Uppsala,12-13 juni, 2017  

Mattsson, A. & Uesaka, T. (2017). Time-dependent, statistical failure of fibre network. Does Weibull distribution hold?. Paper presented at the Euromech colloquium - Deformation and damage mechanisms of wood-fibre network-based materials and structures, Stockholm, 7-9 juni, 2017

Forsberg, S. , Kumar, V. , Engström, A. , Maristiina, N. , Dahlström, C. & Martti, T. (2016). Effect of calendering and coating formulations on conductivity in paper-based electrodes. Paper presented at the TAPPI Advanced Coating Symposium 2016, October 4-6, 2016, Stockholm

Forsberg, V. , Zhang, R. , Andersson, H. , Bäckström, J. , Dahlström, C. , Norgren, M. , Andres, B. & Olin, H. (2016). Liquid Exfoliation of Layered Materials in Water for Inkjet Printing. I Printing for Fabrication 2016 : Materials, Applications, and Processes. USA :

Mattsson, A. & Uesaka, T. (2016). Statistical Failure of Fibre Network under Creep Condition. Paper presented at the VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete, Greece, 5 - 10 June 2016

Andres, B. , Dahlström, C. , Engström, A. , Forsberg, S. , Blomquist, N. & Olin, H. (2015). Cellulose-based binder systems for electrochemical electrodes. Paper presented at the 2015 E-MRS Spring Meeting

Mattsson, A. & Uesaka, T. (2015). Characterisation of time-dependent, stochastic failure of fibre-based materials. Paper presented at the International Paper Physics Conference, Tokyo, 29 October - 1 November 2015

Uesaka, T. (2015). Complex matters: Things that matter. Paper presented at the Tokyo 2015: Joint Conference of International Paper Physics Conference and Paper and Coating Chemistry Symposium

Henshaw Osong, S. , Dahlström, C. , Forsberg, S. , Andres, B. , Engstrand, P. , Norgren, S. , Olin, H. & Engström, A. (2015). Development of CTMP-based nanofibrillated Cellulose /nanographite composites for paper applications. Paper presented at the 9th International Fundamental Mechanical Pulp Research Seminar, 19-20May, Trondheim, Norway

Alecrim, V. , Zhang, R. , Hummelgård, M. , Andres, B. , Dahlström, C. , Norgren, M. , Andersson, M. & Olin, H. (2015). Exfoliated Layered Materials for Digital Fabrication. I NIP & Digital Fabrication Conference. (NIP & Digital Fabrication Conference). S. 192--194.

Faria, G. C. , Duong, D. T. , Dahlström, C. , Rivnay, J. , Malliaras, G. , Owens, R. & Salleo, A. (2015). Modeling Transient Drain Current Response in Biofunctionalized Organic Electrochemical Transistors. Paper presented at the XIV Brazil MRS meeting

Forsberg, S. , Andres, B. , Blomquist, N. , Dahlström, C. , Engström, A. & Olin, H. (2015). Paper-based supercapacitors. Paper presented at the 2015 E-MRS Spring Meeting, May 11-15, 2015, Lille, France

Dahlström, C. , Andres, B. , Faria, G. C. , Engström, A. , Duong, D. T. & Salleo, A. (2015). Structural Change of Cellulose Nanofibers in Supercapacitor Electrodes during Galvanostatic Cycling. Paper presented at the 2015 MRS Fall Meeting & Exhibit

Dahlström, C. , Andres, B. & Forsberg, S. (2014). Coating Uniformity and its Effect on Supercapacitor Capacitance. Paper presented at the 2014 TAPPI Advanced Coating Fundamentals Symposium

Alimadadi, M. & Uesaka, T. (2014). Exploring One-more Dimension of Paper: Properties of 3D-Orieneted Fiber Network. I Progress in Paper Physics Proceedings 2014.  

Mattsson, A. & Uesaka, T. (2014). Predicting Stochastic Failure of Fibre-based Materials in Long Term and Short Term. Paper presented at the Progress in Paper Physics, Raleigh, North Carolina, U.S.A. September 8-11, 2014    

Mattsson, A. & Uesaka, T. (2014). Time-Dependent Stochastic Failure of Fibre Network. Paper presented at the 11th World Congress on Computational Mechanics, Barcelona Spain, 20-25 July 2014    

Uesaka, T. (2013). Performance-based Design of Corrugated Board and Box. Paper presented at the 2013 Paper Week: Annual Meeting of PAPTAC; 7 May, 2013

Mattsson, A. & Uesaka, T. (2013). Time-dependent, statistical failure of paperboard in compression. I Advances in pulp and paper research, Cambridge 2013. UK :  

Uesaka, T. (2013). Variability, non-uniformity, and complexity: From product to process. I Advances in pulp and paper research, Cambridge 2013. Bury, UK :  

Dahlström, C. & Uesaka, T. (2012). Coating Microstructures : Binder Distributions. I 12th TAPPI Advanced Coating Fundamentals Symposium Proceedings, Co-located with the 16th International Coating Science and Technology Symposium, ISCST 2012.. S. 250--257.

Uesaka, T. (2012). Fibre-fibre bond: What paper physicist sees. Paper presented at the Joint international conference of paper physics and paper/coating chemistry

Uesaka, T. , Wiklund, H. & Holmvall, M. (2012). Fluid-Structure Interactions in Random Fibre Networks. Paper presented at the ECCOMAS (European Congress of Computational Methods for Applied Sciences)

Uesaka, T. (2011). Mechanics and Physics of Wet Fibre Network. I Fundamental and Applied Pulp and Paper Modelling Symposium.

Holmvall, M. , Drolet, F. , Uesaka, T. & Lindström, S. (2011). Micro-fluidics in printing nip - Liquid transfer on random fibre network surface. I Progress in Paper Physics Seminar. Graz, Austria :

Wiklund, H. & Uesaka, T. (2011). Micro-fluidics of "water bond". I Progress in Paper Physics Seminar. Graz, Austria :

Kulachenko, A. & Uesaka, T. (2010). Simulation of Wet Fibre Network Deformation. Paper presented at the Progress in Paper Physics Seminar

Vidal, D. & Uesaka, T. (2010). Smoothed Dissipative Particle Dynamics Model for Predicting Self-Assembled Nano-Cellulose Fibre Structures. I 2010 Tappi International Conference on Nanotechnology for the Forest Product Industry.

Lindström, S. , Uesaka, T. & Hirn, U. (2009). Evolution of the paper structure along the length of a twin-wire former. I ADVANCES IN PULP AND PAPER RESEARCH, OXFORD 2009, VOLS 1-3. Bury, UK : . S. 207--245.

Lindström, S. , Kulachenko, A. & Uesaka, T. (2009). New insights in paper forming from particle-level process simulations. I Papermaking Research Symposium 2009. Kuopio, Finland : . S. 38-

Edvardsson, S. & Uesaka, T. (2009). Papermaking Research symposium (PRS) : Web tension variations and runnability of the open draw section. I PRS 2009 Papermaking Research Symposium. Kuopio :

Uesaka, T. (2009). Particle-level Simulation in Paper Science. I Hannu Paulapuro Symposium. Helsinki, Finland : . S. 54--60.

Kulachenko, A. , Lindström, S. & Uesaka, T. (2009). Strength of wet fiber networks-Strength scaling. I Papermaking Research Symposium 2009. Kuopio : . S. 35-

Edvardsson, S. & Uesaka, T. (2009). System stability of the open draw section and paper machine runnability. I ADVANCES IN PULP AND PAPER RESEARCH, OXFORD 2009, VOLS 1-3.. S. 557--575.

Dahlström, C. , Uesaka, T. & Norgren, M. (2008). Base Sheet Structures that Control Coating Uniformity: Effects of Length Scale. I TAPPI Advanced Coating Fundamentals Symposium Proceedings.. S. 124--133.

Lindström, S. & Uesaka, T. (2008). Effects of interparticle friction on the rheology of fibre suspensions. I 5th European Congress on Computational Methods in Applied Sciences and Engineering : TS318, Computational Materials Mechanics V.

Uesaka, T. (2008). Modelling and simulation of paper structures and paper properties. I SECOND INTERNATIONAL PAPERMAKING AND ENVIRONMENT CONFERENCE, PROCEEDING, BOOKS A AND B.. S. 103--109.

Kulachenko, A. , Uesaka, T. & Lindström, S. (2008). Reinventing mechanics of fibre network. I Progress in Paper Physics Seminar. Helsinki : . S. 185--193.

Lindström, S. & Uesaka, T. (2008). Simulation of paper structure development in a roll-blade former. I Progress in Paper Physics Seminar. Espoo : . S. 139--141.

Lindström, S. & Uesaka, T. (2007). A model for flexible fibres in viscous and inert fluid. I 61st Appita annual conference and exhibition, Gold Coast, Australia, 6-9 May 2007, 2007 International paper physics conference, 6pp [Carlton, Australia: Appita, 2007.. S. 23--28.

Uesaka, T. (2007). Prediction of Low Tail of Strength Distribution of Paper. I Proceedings of the 2007 International Paper Physics Conference.. S. 115--122.

Holmvall, M. & Uesaka, T. (2007). Striping of Corrugated Board in Halftone Flexo Post-printing. I 61st Appita annual conference and exhibition, Gold Coast, Australia, 6-9 May 2007, 2007 International paper physics conference, 6pp.

Kulachenko, A. & Uesaka, T. (2007). The Effects of Fibre Orientation Streaks on out-of-Plane Instability of Paper. I Proceedings of the 2007 International Paper Physics Conference.. S. 255--260.

Kulachenko, A. , Gradin, P. A. & Uesaka, T. (2006). Basic mechanisms of fluting. I 92nd Annual Meeting Preprints-Book A, 7 Feb. 2006 , Canada. Que., Canada : . S. 161--173.

Holmvall, M. & Uesaka, T. (2006). Nip Mechanics of Flexo Post-Printing on Corrugated Board. I Euromech Colloquium 486.

Holmvall, M. & Uesaka, T. (2006). Striping of Corrugated Board in Flexo Post-Printing. I International Printing and Graphic Arts Conference proceedings 2006.

Lindström, S. & Uesaka, T. (2006). Suspensions of flexible fibres in flows of decaying turbulence. I Euromech. Sundsvall :

Drolet, F. & Uesaka, T. (2005). A Stochastic Structure Model for Predicting sheet Consolidation and Print Uniformity. I 13th fundamental research symposium, Cambridge, 11-16 sept. 2005.. S. 1139--1154.

Uesaka, T. (2005). Computational Modelling of Stochastic Paper Structures and Its Application to Paper Material Design. I Proc. International Symposium of Wood Science and Technology.

Deng, N. , Ferahi, M. & Uesaka, T. (2005). Pressroom runnability : comprehensive analyses of pressroom and mill databases. I Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC) : Book C.. S. C217--228.

Lindström, S. & Uesaka, T. (2005). Stochastic Modelling of Paper Structure. Effects of Forming Section. I Proceedings, 5th Biennal Johan Gullichsen Colloquium, Helsinki, 17. Nov. 2005. Helsinki : . S. 25--35.

Kulachenko, A. , Gradin, P. & Uesaka, T. (2005). Tension wrinkling and fluting in heatset web offset printing process : post buckling analysis. I Advances in Paper Science and Technology : Transactions of the 13th fundamental research symposium, Vols 1-3.. S. 1075--1099.

Kulachenko, A. , Gradin, P. & Uesaka, T. (2005). The effect of local moisture variations on fluting in heatset web offset printing. I Proc. of 5th Biennial Johan Gullichsen Colloquium.

Patent

Shigetani, T. , Yamana, T. , Kamiya, M. & Uesaka, T. (1990). Support sheet for photographic paper .

Rapporter

Kulachenko, A. , Gradin, P. A. & Uesaka, T. (2006). Basic mechanisms of fluting formation and retention in paper. Sundsvall : Mittuniversitetet, FSCN (Rapportserie FSCN 2006:36). (FSCN-rapport R-06-65).  

Uesaka, T. (2004). Web breaks in pressroom : a review. Sundsvall : Mitthögskolan, FSCN (Rapportserie FSCN 2004:31). (FSCN-rapport R-04-58).