Hans Höglund

E-postadress: hans.hoglund@miun.se
Rumsnummer: SCA5076
Ort: Sundsvall

- Avdelning:
- Institutionen för ingenjörsvetenskap, matematik och ämnesdidaktik (IMD)

Publikationer

Artiklar i tidskrifter
Artiklar, forskningsöversikter
Kapitel i böcker, del av antologier
Konferensbidrag
Manuskript
Patent

Artiklar i tidskrifter

Joelsson, T. , Pettersson, G. , Norgren, S. , Svedberg, A. , Höglund, H. & Engstrand, P. (2020). High strength paper from high yield pulps by means of hot-pressing. Nordic Pulp & Paper Research Journal, vol. 35: 2, ss. 195-204.

Joelsson, T. , Pettersson, G. , Norgren, S. , Svedberg, A. , Höglund, H. & Engstrand, P. (2020). Improved paper wet-strength by increasing lignin content and hot-pressing temperature. ,

Joelsson, T. , Pettersson, G. , Norgren, S. , Svedberg, A. , Höglund, H. & Engstrand, P. (2020). Improving paper wet strength via increased lignin content and hot-pressing temperature. TAPPI Journal, vol. 19: 10, ss. 487-499.

Norgren, S. , Pettersson, G. & Höglund, H. (2018). Strong paper from spruce CTMP - Part II : Effect of pressing at nip press temperatures above the lignin softening temperature. Nordic Pulp & Paper Research Journal, vol. 33: 1, ss. 142-149.

Pettersson, G. , Norgren, S. & Höglund, H. (2017). Strong paper from spruce CTMP - Part I. Nordic Pulp & Paper Research Journal, vol. 32: 1, ss. 54-58.

Pettersson, G. , Höglund, H. , Norgren, S. , Sjöberg, J. , Peng, F. , Hallgren, H. , Moberg, A. , Ljungqvist, C. & et al. (2015). Strong and bulky paperboard sheets from surface modified CTMP, manufactured at low energy. Nordic Pulp & Paper Research Journal, vol. 30: 2, ss. 318-324.

Norgren, S. & Hoglund, H. (2014). Consolidation of fibre-fibre bonds in TMP and CTMP based papers. Paper Technology, vol. 55: 3, ss. 6-10.

Logenius, L. , Agnemo, R. & Höglund, H. (2010). A study of the formation and elimination of chromophores in wood under mechanical pulping conditions using spectroscopy. Paperi ja puu - Paper and timber, vol. 92: 5, ss. 35-39.

Svensson, B. A. , Nyström, S. K. , Gradin, P. A. & Höglund, H. (2009). Frictional testing of wood : Initial studies with a new device. Tribology International, vol. 42: 1, ss. 190-196.

Norgren, S. & Höglund, H. (2009). Irreversible long fibre collapse at high temperature refining in a TMP system : Effects on fibre and surface properties. Nordic Pulp & Paper Research Journal, vol. 24: 1, ss. 19-24.

Fjellström, H. , Höglund, H. , Paulsson, M. & Forsberg, S. (2009). The UV-screening properties of coating layers : The influence of pigments, binders and additives. Nordic Pulp & Paper Research Journal, vol. 24: 2, ss. 206-212.

Fjellström, H. , Höglund, H. , Paulsson, M. & Rundlöf, M. (2008). Discolouration of mechanical and chemimechanical pulps : influence of wood raw material, process and ageing method. Nordic Pulp & Paper Research Journal, vol. 23: 1, ss. 14-18.

Sjöberg, J. C. , Häggquist, M. , Wikström, M. , Lindström, T. & Höglund, H. (2008). Effects of pressurised high consistency refining on sheet density. Nordic Pulp & Paper Research Journal, vol. 23: 1, ss. 39-45.

Klinga, N. , Höglund, H. & Sandberg, C. (2008). Energy efficient high quality CTMP for paperboard. Journal of Pulp and Paper Science (JPPS), vol. 34: 2, ss. 98-106.

Norgren, S. & Höglund, H. (2008). Moisture-induced surface roughness in TMP sheets. Journal of Pulp and Paper Science (JPPS), vol. 34: 3, ss. 139-146.

Fjellström, H. , Höglund, H. , Forsberg, S. , Paulsson, M. & Rundlöf, M. (2007). A novel method of studying the ability of coating layer to retard the photo-yellowing of the base paper. Nordic Pulp & Paper Research Journal, vol. 22: 3, ss. 343-349.

Svensson, B. , Vesterlind, E. & Höglund, H. (2007). Frictional properties of native and chemically modified birch wood. Nordic Pulp & Paper Research Journal, vol. 22: 3, ss. 325-330.

Pettersson, G. , Sjöberg, J. , Wågberg, L. , Höglund, H. & Averheim, A. (2007). Increased joint-forming ability of ductile kraft pulp fibres by polyelectrolyte multilayer treatment-Influence of refining and drying strategies. Nordic Pulp & Paper Research Journal, vol. 22: 2, ss. 228-235.

Fjellström, H. , Höglund, H. , Forsberg, S. & Paulsson, M. (2007). Inhibition of light-induced brightness reversion of high-yield pulps : the UV-screening properties of coating layers containing kaolin or calcium carbonate pigments. Nordic Pulp & Paper Research Journal, vol. 22: 3, ss. 350-355.

Fjellström, H. , Höglund, H. & Paulsson, M. (2007). Light-induced yellowing of mechanical and chemimechanical pulp sheets : influence of wood raw material, process and ageing method. Nordic Pulp & Paper Research Journal, vol. 22: 1, ss. 117-123.

Klinga, N. , Höglund, H. & Sandberg, C. (2007). Paper properties of TMP and CTMP handsheets from spruce, as affected by the press load and temperature during sheet drying. Nordic Pulp & Paper Research Journal, vol. 22: 4, ss. 468-474.

Klinga, N. , Höglund, H. & Sandberg, C. (2007). Paper properties of TMP and CTMP handsheets from spruce, as affected by the solids content from pressing. Nordic Pulp & Paper Research Journal, vol. 22: 4, ss. 475-480.

Sjöberg, J. & Höglund, H. (2007). Refining systems for sack paper, Part II : Plug screw and Bivis treatment under pressurised conditions and subsequent LC refining. Nordic Pulp & Paper Research Journal, vol. 22: 1, ss. 61-71.

Vesterlind, E. & Höglund, H. (2006). A method to optimise birch CTMP pre-treatments by direct measurement of brightness on birch wood. Nordic Pulp & Paper Research Journal, vol. 21: 3, ss. 419-425.

Vesterlind, E. & Höglund, H. (2006). Chemitermomechanical pulp made from birch at high temperature. Nordic Pulp & Paper Research Journal, vol. 21: 2, ss. 216-221.

Svensson, B. , Rundlöf, M. & Höglund, H. (2006). Sliding Friction Between Wood and Steel in a Saturated Steam Environment. Journal of Pulp and Paper Science (JPPS), vol. 32: 1, ss. 38-43.

Pettersson, G. , Höglund, H. & Wågberg, L. (2006). The use of polyelectrolyte multilayers of cationic starch and CMC to enhance strength properties of papers formed from mixtures of unbleached chemical pulp and CTMP : Part I. Nordic Pulp & Paper Research Journal, vol. 21: 1, ss. 115-121.

Pettersson, G. , Höglund, H. & Wågberg, L. (2006). The use of polyelectrolyte multilayers of cationic starch and CMC to enhance strength properties of papers formed from mixtures of unbleached chemical pulp and CTMP-II : Part II: Influnence of addition strategy, fibre treatment and fibre type. Nordic Pulp & Paper Research Journal, vol. 21: 1, ss. 122-128.

Sjöberg, J. & Höglund, H. (2005). Refining system for sack paper pulp: Part I HC refining under pressurised conditions and subsequent LC refining. Nordic Pulp & Paper Research Journal, vol. 20: 3, ss. 320-328.

Norgren, S. , Höglund, H. & Bäck, R. (2004). Irreversible long fibre collapse at high temperature TMP reject refining - initial studies. Pulp & paper Canada, vol. 105: 7, ss. 47-51.

Friman, L. , Höglund, H. , Högberg, H. & Agnemo, R. (2004). Tannin-iron impregnated thermomechanical pulp : Part I: Effects of extractions and heat on brightness. Nordic Pulp & Paper Research Journal, vol. 19: 2, ss. 229-236.

Friman, L. , Höglund, H. , Högberg, H. & Agnemo, R. (2004). Tannin-iron impregnated thermomechanical pulp : Part II: Bleachability and brightness reversion. Nordic Pulp & Paper Research Journal, vol. 19: 4, ss. 525-531.

Rundlöf, M. , Htun, M. , Höglund, H. & Wågberg, L. (2000). Mechanical pulp fines of poor quality - Characteristics and influence of white water. Journal of Pulp and Paper Science (JPPS), vol. 26: 9, ss. 308-316.

Rundlöf, M. , Htun, M. , Höglund, H. & Wågberg, L. (2000). The importance of the experimental method when evaluating the quality of fines of mechanical pulps. Journal of Pulp and Paper Science (JPPS), vol. 26: 9, ss. 301-307.

Artiklar, forskningsöversikter

Pettersson, G. , Norgren, S. , Engstrand, P. , Rundlöf, M. & Höglund, H. (2021). Aspects on bond strength in sheet structures from TMP and CTMP - a review. Nordic Pulp & Paper Research Journal, vol. 36: 2, ss. 177-213.

Kapitel i böcker, del av antologier

Höglund, H. (2009). Mechanical Pulping. I Pulping Chemistry and Technology. Stockholm : KTH Royal Institute of Technology. S. 57-90.

Konferensbidrag

Engberg, B. A. , Vuorio, P. , Granfeldt, T. , Ahlzén, P. , Lundfors, M. , Pettersson, G. & Höglund, H. (2022). Abrasive refining of spruce TMP and CTMP fibers. I Proceedings of the International Mechanical Pulping Conference.. S. 57--62.

Joelsson, T. , Pettersson, G. , Norgren, S. , Svedberg, A. , Höglund, H. & Engstrand, P. (2019). Improving paper wet-strength by means hot-pressing and increased lignin content in pulp fibers. I Paper Conference and Trade Show, PaperCon 2019.. S. 704--713.

Samuelsson, T. , Pettersson, G. , Norgren, S. , Svedberg, A. , Höglund, H. & Engstrand, P. (2018). Development of strong and water resistant packaging materials from high yield pulps – fundamental aspects. I IMPC 2018. Trondheim, Norway :

Pettersson, G. , Höglund, H. , Norgren, S. , Engstrand, P. , Peng, F. , Granfeldt, T. , Bergström, J. & Joelsson, T. (2018). Upgrading the strength properties of sheets from hardwood high yield pulps. I Pan Pacific Fibre Value Chain Conference 2018, Proceedings.. S. 142--147.

Pettersson, G. , Norgren, S. , Höglund, H. & Engstrand, P. (2016). Low energy CTMP in strong and bulky paperboard plies. I Paper Conference and Trade Show, PaperCon 2016.. S. 556--564.

Pettersson, G. , Norgren, S. & Höglund, H. (2016). Strong paper from spruce CTMP. I International Mechanical Pulping Conference 2016, IMPC 2016.. S. 229--233.

Norgren, S. , Pettersson, G. & Höglund, H. (2014). High strength papers from high yield pulps. I International Mechanical Pulping Conference, IMPC 2014. (International Mechanical Pulping Conference, IMPC 2014)

Pettersson, G. , Höglund, H. , Sjöberg, J. C. , Peng, F. , Bergström, J. , Solberg, D. , Norgren, S. , Hallgren, H. & et al. (2014). Strong and bulky paperboard plies from low energy CTMP. I International Mechanical Pulping Conference, IMPC 2014.

Norgren, S. & Höglund, H. (2011). Consolidation of fibre-fibre bonds in TMP and CTMP based papers. I PROCEEDING OF INTERNATIONAL MECHANICAL PULPING CONFERENCE 2011.. S. 448--453.

Klinga, N. , Höglund, H. & Sandberg, C. (2007). Energy efficient high quality CTMP for paperboard. I International Mechanical Pulping Conference 2007, TAPPI.. S. 370--380.

Sjöberg, J. & Höglund, H. (2007). High consistency refining of kraft pulp for reinforcing paper based on TMP furnishes. I International Mechanical Pulping Conference 2007, TAPPI.. S. 943--953.

Svensson, B. A. , Holmgren, S. , Gradin, P. A. & Höglund, H. (2007). High Strain Rate Compression and Sliding Friction of Wood under Refining Conditions. I International Mechanical Pulping Conference 2007, TAPPI.. S. 983--994.

Logenius, L. , Agnemo, R. & Höglund, H. (2007). High-Temperature Bleaching of Mechanical Pulps from Spruce. I Proceedings. Internationl mechanical pulping conference 6-9 May, 2007, Minneapolis, MN, USA.. S. 580--587.

Norgren, S. & Höglund, H. (2007). Moisture-Induced Surface Roughness in TMP Sheets.. I International Mechanical Pulping Conference 2007, TAPPI.. S. 718--729.

Fjellström, H. , Höglund, H. , Paulsson, M. & Forsberg, S. (2006). A novel method for studying the photo-stabilising properties of coating layers. Paper presented at the 5th Fundamental Mechanical Pulp Reserch Seminar (FMPRS),Trondheim, Norway, 31 May-1 June 2006

Logenius, L. , Angemo, R. & Höglund, H. (2006). High temperature Peroxide Bleaching of TMP from Spruce. I 5th Fundamental Mechanical Pulping Reasearch Seminar, 31 May- 1 June, 2006, Trondheim, Norway.

Branström, J. , Norgren, S. , Sandström, P. , Ruel, K. & Höglund, H. (2005). Compression wood in knots and the effect on surface roughness.. I proceedings from IMPC 2005.

Vesterlind, E. & Höglund, H. (2005). High Temperature Birch CTMP. I Proceedings. SPCI International Conference 2005, Stockholm, Sweden, June 14-16.

Logenius, L. , Agnemo, R. & Höglund, H. (2005). High temperature bleaching of mechanical pulps from spruce. I Proceedings, International Mechanical Pulping Conference, 7-9 June, 2005, Oslo, Norway.. S. 80--84.

Fjellström, H. , Höglund, H. , Paulsson, M. & Forsberg, S. (2005). Influence of coating formulation on light-induced brightness stability of mechanical and chemimechanical pulp sheets. I International Mechanical Pulping Conference: IMPC 2005, Oslo, Norway, 7-9 June 2005.. S. 339--343.

Norgren, S. & Höglund, H. (2005). Irreversible long fibre collapse at high temperature reject refining in a TMP system : Effects on fibre and surface properties. I Proceedings International Mechanical Pulping Conference Oslo 2005.. S. 163--168.

Vesterlind, E. , Höglund, H. , Kolar, M. & Bergström, J. (2005). Low Energy Birch CTMP in Bulky Paper Products. I Proceedings. International Mechanical Pulping Conference 2005, Oslo, Norway..

Klinga, N. , Sandberg, C. & Höglund, H. (2005). Sheet properties of high yield pulps related to different pressing and drying conditions - part I. I International Mechanical Pulping Conference : IMPC 2005, Oslo, Norway, 7-9 June 2005. Oslo : . S. 344--348.

Svensson, B. , Rundlöf, M. & Höglund, H. (2005). Sliding friction between wood and steel in a saturated steam environment. I International Mechanical Pulping Conference: IMPC 2005 : Oslo, Norway, 7-9 June 2005.. S. 31--37.

Sjöberg, J. & Höglund, H. (2004). Highly extensible kraft pulp fibres : The 2004 Progress in Paper Physics Seminar.

Logenius, L. , Höglund, H. & Agnemo, R. (2004). Impact of temperature profile on the brightness of spruce wood. I 4th Fundamental Mechanical Pulping Research Seminar, 7-8 June, 2004, Stockholm, Sweden.

Sjöberg, J. , Höglund, H. & Andreasson, B. (2003). Highly Extensible Kraft Pulp Fibres. I 5th International Paper and Coating Chemistry Symposium 2003 : Montreal,Canada,June 16-19 2003.

Norgren, S. & Höglund, H. (2003). Irreversible long fibre collapse at high temperure reject refining in at TMP system - Initial studies.. I Proceedings from IMPC 2003, Quebec city.

Norman, F. & Höglund, H. (2003). Moisture-induced surface roughness in TMP-based paper - The influence of fiber cross-section dimensions : IMPC 2003.

Nygren, O. , Höglund, H. & Roland, B. (2003). On characterization of mechanical and chemimechanical pulps. I International Mechanical Pulping conference, Quebec, Que, Canada, 2-5 June 2003,. Montreal : . S. 486-

Backlund, H. , Höglund, H. & Gradin, P. (2003). Study of tangential forces and temperature profiles in commercial refiners. I 2003 International Mechanical Pulping Conference.. S. 379--388.

Lindström, M. , Hedenström, E. & Högberg, H. E. (2003). Synthesis of nucleoside analogs : Meeting abstract. I ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY. (ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY)

Svensson, B. , Nyström, S. K. , Gradin, P. , Bergfors, E. & Höglund, H. (2003). Tribology under refining conditions : initial studies. I 2003 International Mechanical Pulping Conference.. S. 233--237.