Tuesday May 20
08.00 Registration
At the venue.
08.30 Opening
Welcome and information regarding best presentation prize.
8.45 Keynote
Thad Maloney, Aalto University, Fine-scale fiber fibrillation.
9.20 Session 1: LC Refining
- Mattias Aigner, University of Victoria: A novel method to estimate refiner power and intensity of impacts in LC refining.
- Kaarlo Niskanen, Mid Sweden University: Homogeneity of fibrillation in LC-refining.
10.10 Coffee break
Time for networking.
10.40 Session 2: Delamination, converting and embossing
- Mohammad Ebrahimijamal, Karlstad University: Delamination behavior of paperboard under normal and shear loading: experimental and cohesive zone modeling.
- Ulrike Käppeler, Leipzig University of Applied Sciences: Surface Material Stretching within the Embossing Process of Paperboard.
- Anders Biel, Karlstad University: Experimental studies of delamination of paperboard.
- Per Engstrand, Mid Sweden University: How to achieve a certain combination of physical properties of a middle layer pulp for paperboard starting from a mix of hardwood and softwood.
12.20 Lunch
At the venue.
13.30 Session 3: Mechanical models of paper
- Erfan Oliaei, KTH Royal Inst of Techn, Dept of Fiber and Polym: Eco-Friendly CTMP Fiber Networks: Hot-Pressed for Enhanced Strength and Density.
- Eric Borgqvist, Tetra Pak Packaging Solutions: Constrained Three Point Bending experiments and simulations of multi-ply paperboard.
- Camilla Persson, Örebro University: Detection and Influence of Bulging and Creasing in Carton Board Packages by Point Load Measurements.
- Nadir Kopic-Osmanovic, CAM, University of Wuppertal: A Robust Elasto-Plastic Framework for Paper-Based Materials: Integrating In-Plane and Out-of-Plane Behavior.
15.10 Coffee Break
Time for networking.
15.40 Session 4: Multi-phase flow and swelling I
- Carlos A. Rojas Vega, Eindhoven University of Technology, A computational multi-phase flow model for predicting moisture transport and swelling in paper-based materials.
- Patrick Wegele, KTH Royal Institue of Technology: Increasing the dewatering of water-saturated fibre networks in dynamic load cases by generating macro-scale stress variations.
16.30 Poster presentations
- Nima Fallahjoybari, Mid Sweden University: Understanding Fibre Refining Through CFD-DEM Simulations.
- Karuna Nambi Gowri, North Carolina State University: Evaluation of Inter-Fiber Frictional Forces for Cellulosic Fibers in Wet-Laid System.
- Stefan Lindström, Mid Sweden University: Pulp quality assessment using dominant modes of fiber distribution fluctuations in high-consistency refining.
- Jukka Ketoja, VTT Technical Research Centre of Finland Ltd: Layered Miura-ori origami structures for stiff-flexible mechanics.
- Alexander Wagner, Graz University of Technology: Open-Loop Recycling of Post-Consumer Textiles into Packaging Paper.
- Amanda Mattsson, Mid Sweden University: Characterization of Hot-Pressed Fibre Joints Using X-ray Nano Tomography.
- Vaibhav Modi, VTT Technical Research Center of Finland Ltd: From Microfibrils to Mesopores: Insights into Moisture and Thermal Treatment Using All-Atom and Coarse-Grained Simulations.
- Toma Schneider, PTS - Institut für Fasern & Papier gGmbH, Determination of plastic compressive stiffness behaviour in plane on the basis of bending stress, using CRT.
- Nils Sauer, TU Darmstadt: Linking thermally responsive polymers to cellulose for more efficient dewatering and drying of paper.
- Nele Link, TU Darmstadt: Utilisation of chaotropic agents as additives for an energy efficient paper production.
- Jonas Engqvist, Solid mechanics, Lund University: An experimental protocol for cyclic folding of paperboard.
- Patrick Galenschowski, TU Darmstadt: Investigation of Capillary Rise Height in Paper Sheets Under Rotational Hypergravity Conditions.
17.20 Welcome reception and poster exhibition
At the venue.