This is where we list publications connected to Sports Tech Research Centre, in Swedish and English. For publications from an individual researcher, please visit the page "Staff".

Publications

Articles in journals

Sjöström, W. , Koptyug, A. , Rännar, L. & Botero, C. (2024). Near-infrared radiation : A promising heating method for powder bed fusion. Materials and Manufacturing Processes, vol. 39: 3, pp. 320-328.  

Khrapov, D. , Paveleva, A. , Kozadayeva, M. , Evsevleev, S. , Mishurova, T. , Bruno, G. , Surmenev, R. , Koptyug, A. & et al. (2023). Trapped powder removal from sheet-based porous structures based on triply periodic minimal surfaces fabricated by electron beam powder bed fusion. Materials Science & Engineering, vol. 862  

Koptyug, A. , Sukhovei, Y. , Kostolomova, E. , Unger, I. & Kozlov, V. (2023). Novel Strategy in Searching for Natural Compounds with Anti-Aging and Rejuvenating Potential. International Journal of Molecular Sciences, vol. 24: 9  

Grubova, I. Y. , Surmenev, R. A. , Neyts, E. C. , Koptyug, A. V. , Volkova, A. P. & Surmeneva, M. A. (2023). Combined First-Principles and Experimental Study on the Microstructure and Mechanical Characteristics of the Multicomponent Additive-Manufactured Ti-35Nb-7Zr-5Ta Alloy. ACS Omega, vol. 8: 30, pp. 27519-27533.  

Khrapov, D. , Kozadayeva, M. , Koptyug, A. , Mishurova, T. , Meinel, D. , Surmenev, R. & Surmeneva, M. (2023). Geometrical features and mechanical properties of the sheet-based gyroid scaffolds with functionally graded porosity manufactured by electron beam melting. Materials Today Communications, vol. 35  

Kozadaeva, M. , Surmeneva, M. , Khrapov, D. , Rybakov, V. , Surmenev, R. , Koptyug, A. , Vladescu, A. , Cotrut, C. M. & et al. (2023). Assessment of Microstructural, Mechanical and Electrochemical Properties of Ti–42Nb Alloy Manufactured by Electron Beam Melting. Materials, vol. 16: 13  

Roos, S. , Botero, C. & Rännar, L. (2023). Electron beam powder bed fusion processing of 2507 super duplex stainless steel. as-built phase composition and microstructural properties. Journal of Materials Research and Technology, vol. 24, pp. 6473-6483.  

Jong, M. , Hanstock, H. G. , Stenfors, N. & Ainegren, M. (2023). Elite skiers' experiences of heat- and moisture-exchanging devices and training and competition in the cold : A qualitative survey. Health Science Reports, vol. 6: 9  

Lidar, J. , Ainegren, M. & Sundström, D. (2023). Development and validation of dynamic bioenergetic model for intermittent ergometer cycling. European Journal of Applied Physiology, vol. 123: 12, pp. 2755-2770.  

Parshin, D. V. , Gaifutdinov, R. A. , Koptioug, A. & Chupakhin, A. P. (2023). MECHANICS OF SKI SLIDING ON SNOW : CURRENT STATUS AND PROSPECTS. Journal of Applied Mechanics and Technical Physics, vol. 64: 4, pp. 693-706.  

Grubova, I. Y. , Kozadaeva, M. , Volkova, A. P. , Khrapov, D. , Surmenev, R. A. , Koptyug, A. V. , Vladescu (Dragomir), A. , Tyurin, A. & et al. (2023). Process window for electron beam melting of Ti–42Nb wt.%. Journal of Materials Research and Technology, vol. 25, pp. 4457-4478.  

Koptyug, A. V. , Sukhovei, Y. G. & Victor A, G. (2023). Possible Existence of the Relict Mechanism of Cell Protection During Division. Biomedical Journal of Scientific & Technical Research, vol. 51: 3  

Botero, C. , Koptyug, A. , Sjöström, W. , Jiménez-Piqué, E. , Şelte, A. & Rännar, L. (2023). Functionally Graded Steels Obtained via Electron Beam Powder Bed Fusion. Key Engineering Materials, vol. 964, pp. 79-84.  

Koptyug, A. , Khrapov, D. , Surmeneva, M. & Surmenev, R. (2023). Triply Periodic Minimal Surfaces Manufactured by Electron Beam Powder Bed Fusion : Approaches and Challenges. Key Engineering Materials, vol. 964, pp. 91-96.  

Roos, S. , Barbera Flichi, F. , Ortiz-Membrado, L. , Botero Vega, C. A. , Jiménez-Piqué, E. & Rännar, L. (2023). Assessing the viability of high-frequency spot melting for super duplex stainless steel 2507 via electron beam powder bed fusion. Journal of Materials Research and Technology, vol. 27, pp. 5720-5728.    

Surmeneva, M. A. , Khrapov, D. , Prosolov, K. , Kozadayeva, M. , Koptyug, A. , Volkova, A. , Paveleva, A. & Surmenev, R. A. (2022). The influence of chemical etching on porous structure and mechanical properties of the Ti6AL4V Functionally Graded Porous Scaffolds fabricated by EBM. Materials Chemistry and Physics, vol. 275  

Loginov, Y. N. , Koptyug, A. , Popov, V. J. , Belikov, S. V. , Mukanov, G. , Golodnov, A. I. & Stepanov, S. I. (2022). Compression deformation and fracture behavior of additively manufactured Ti–6Al–4V cellular structures. International Journal of Lightweight Materials and Manufacture, vol. 5: 1, pp. 126-135.    

Facchetti, D. , Hempel, U. , Martocq, L. , Smith, A. M. , Koptyug, A. , Surmenev, R. A. , Surmeneva, M. A. & Douglas, T. E. L. (2022). Heparin enriched-wpi coating on ti6al4v increases hydrophilicity and improves proliferation and differentiation of human bone marrow stromal cells. International Journal of Molecular Sciences, vol. 23: 1    

Ainegren, M. , Hanstock, H. & Stenfors, N. (2022). Breathing resistance in heat and moisture exchanging devices. Proceedings of the Institution of Mechanical Engineers, Part P, vol. 236: 2, pp. 97-105.    

Stenfors, N. , Persson, H. , Tutt, A. , Tufvesson, E. , Andersson, E. P. , Ainegren, M. & Hanstock, H. G. (2022). A breathing mask attenuates acute airway responses to exercise in sub-zero environment in healthy subjects. European Journal of Applied Physiology, vol. 122: 6, pp. 1473-1484.  

Molavitabrizi, D. , Bengtsson, R. , Botero, C. , Rännar, L. & Mahmoud Mousavi, S. (2022). Damage-induced failure analysis of additively manufactured lattice materials under uniaxial and multiaxial tension. International Journal of Solids and Structures, vol. 252  

Lund Ohlsson, M. , Danvind, J. & Holmberg, L. J. (2022). Estimation of muscular metabolic power in two different cross-country sit-skiing sledges using inverse-dynamics simulation. Journal of Rehabilitation and Assistive Technologies Engineering, vol. 9  

Ainegren, M. , Linnamo, V. & Lindinger, S. (2022). Effects of Aerodynamic Drag and Drafting on Propulsive Force and Oxygen Consumption in Double Poling Cross-Country Skiing. Medicine & Science in Sports & Exercise, vol. 54: 7, pp. 1058-1065.  

Popov, V. V. , Grilli, M. L. , Koptyug, A. , Jaworska, L. , Katz-Demyanetz, A. , Klobčar, D. , Balos, S. , Postolnyi, B. O. & et al. (2021). Powder bed fusion additive manufacturing using critical raw materials : A review. Materials, vol. 14: 4    

Tutt, A. , Persson, H. , Andersson, E. P. , Ainegren, M. , Stenfors, N. & Hanstock, H. G. (2021). A heat and moisture-exchanging mask impairs self-paced maximal running performance in a sub-zero environment. European Journal of Applied Physiology, vol. 121: 7, pp. 1979-1992.    

Stenfors, N. , Hanstock, H. , Ainegren, M. & Lindberg, A. (2021). Usage of and attitudes toward heat‐ and moisture‐exchanging breathing devices among adolescent skiers. Translational sports medicine, vol. 4: 3, pp. 337-343.    

Botero, C. A. , Şelte, A. , Ramsperger, M. , Maistro, G. , Koptyug, A. , Bäckström, M. , Sjöström, W. & Rännar, L. (2021). Microstructural and mechanical evaluation of a cr-mo-v cold-work tool steel produced via electron beam melting (Ebm). Materials, vol. 14: 11  

Evsevleev, S. , Mishurova, T. , Khrapov, D. , Paveleva, A. , Meinel, D. , Surmenev, R. , Surmeneva, M. , Koptyug, A. & et al. (2021). X-ray Computed Tomography Procedures to Quantitatively Characterize the Morphological Features of Triply Periodic Minimal Surface Structures. Materials, vol. 14: 11    

Surmeneva, M. , Grubova, I. , Glukhova, N. , Khrapov, D. , Koptyug, A. , Volkova, A. , Ivanov, Y. , Cotrut, C. M. & et al. (2021). New Ti-35Nb-7Zr-5Ta Alloy Manufacturing by Electron Beam Melting for Medical Application Followed by High Current Pulsed Electron Beam Treatment. Metals, vol. 11: 7    

Chudinova, E. , Koptyug, A. , Mukhortova, Y. , Pryadko, A. , Volkova, A. , Ivanov, A. , Plotnikov, E. , Khan, Y. & et al. (2021). Functionalization of additive-manufactured Ti6Al4V scaffolds with poly(allylamine hydrochloride)/poly(styrene sulfonate) bilayer microcapsule system containing dexamethasone. Materials Chemistry and Physics, vol. 273  

Khrapov, D. , Kozadayeva, M. , Manabaev, K. , Panin, A. , Sjöström, W. , Koptyug, A. , Mishurova, T. , Evsevleev, S. & et al. (2021). Different approaches for manufacturing ti-6al-4v alloy with triply periodic minimal surface sheet-based structures by electron beam melting. Materials, vol. 14: 17    

Hanstock, H. , Tutt, A. S. , Persson, H. , Andersson, E. , Ainegren, M. & Stenfors, N. (2021). 390 Can a heat-and-moisture exchanger attenuate inflammatory responses to exercise in sub-zero conditions?. British Journal of Sports Medicine, vol. 55: Suppl 1  

Zullo, G. , Silvestroni, A. L. , Candiotto, G. , Koptyug, A. & Petrone, N. (2021). A novel multi-axial pressure sensor probe for measuring triaxial stress states inside soft materials. Sensors, vol. 21: 10    

Sundström, D. , Kurz, M. & Björklund, G. (2021). Runners adapt different lower-limb movement patterns with respect to different speeds and downhill slopes. Frontiers in Sports and Active Living, vol. 3    

Roos, S. & Rännar, L. (2021). Process Window for Electron Beam Melting of 316LN Stainless Steel. Metals, vol. 11: 137  

Lidar, J. , Andersson, E. P. & Sundström, D. (2021). Validity and Reliability of Hydraulic-Analogy Bioenergetic Models in Sprint Roller Skiing. Frontiers in Physiology, vol. 12    

Koptioug, A. , Popov, V. V. J. , Botero Vega, C. A. , Jiménez-Piqué, E. , Katz-Demyanetz, A. , Rännar, L. & Bäckström, M. (2020). Compositionally-tailored steel-based materials manufactured by electron beam melting using blended pre-alloyed powders. Materials Science & Engineering, vol. 771  

Khrapov, D. , Koptioug, A. , Manabaev, K. , Léonard, F. , Mishurova, T. , Bruno, G. , Cheneler, D. , Loza, K. & et al. (2020). The impact of post manufacturing treatment of functionally graded Ti6Al4V scaffolds on their surface morphology and mechanical strength. Journal of Materials Research and Technology, vol. 9: 2, pp. 1866-1881.    

Surmeneva, M. A. , Koptyug, A. , Khrapov, D. , Ivanov, Y. F. , Mishurova, T. , Evsevleev, S. , Prymak, O. , Loza, K. & et al. (2020). In situ synthesis of a binary Ti–10at% Nb alloy by electron beam melting using a mixture of elemental niobium and titanium powders. Journal of Materials Processing Technology, vol. 282  

Mallipeddi, D. , Hajali, T. , Rännar, L. , Bergström, A. , Hernandez, S. , Strandh, E. , Nyborg, L. & Krajnik, P. (2020). Surface Integrity of Machined Electron Beam Melted Ti6Al4V Alloy Manufactured with Different Contour Settings and Heat Treatment. Procedia CIRP, vol. 87, pp. 327-332.    

Botero Vega, C. A. , Ramsperger, M. , Selte, A. , Åsvik, K. , Koptioug, A. , Skoglund, P. , Roos, S. , Rännar, L. & et al. (2020). Additive Manufacturing of a Cold-Work Tool Steel using Electron Beam Melting. Steel Research International, vol. 19: 5, pp. 1-6.  

Ainegren, M. , Jensen, K. & Rosdahl, H. (2020). Breathing resistance in metabolic systems : Its effects on pulmonary ventilation and oxygen uptake in elite athletes with high aerobic power. Proceedings of the Institution of Mechanical Engineers, Part P, vol. 234: 3, pp. 217-226.  

Surmeneva, M. A. , Chudinova, E. A. , Chernozem, R. V. , Lapanje, A. , Koptyug, A. V. , Rijavec, T. , Loza, K. , Prymak, O. & et al. (2020). Development of a bone substitute material based on additive manufactured Ti6Al4V alloys modified with bioceramic calcium carbonate coating : Characterization and antimicrobial properties. Ceramics International, vol. 46: 46, pp. 25661-25670.  

Mieszkowska, A. , Beaumont, H. , Martocq, L. , Koptyug, A. , Surmeneva, M. A. , Surmenev, R. A. , Naderi, J. , Douglas, T. E. L. & et al. (2020). Phenolic-enriched collagen fibrillar coatings on titanium alloy to promote osteogenic differentiation and reduce inflammation. International Journal of Molecular Sciences, vol. 21: 17, pp. 1-15.    

Hanstock, H. , Ainegren, M. & Stenfors, N. (2020). Exercise in Sub-zero Temperatures and Airway Health : Implications for Athletes With Special Focus on Heat-and-Moisture-Exchanging Breathing Devices. Frontiers in Sports and Active Living, vol. 2: 34    

Khrapov, D. , Surmeneva, M. , Koptioug, A. & Surmenev, R. (2019). Microstructure investigation of Ti-26Nb alloy manufactured from elemental powders by electron beam melting. Journal of Physics, Conference Series, : 1    

Ainegren, M. , Tuplin, S. , Carlsson, P. & Render, P. (2019). Design and development of a climatic wind tunnel for physiological sports experimentation. Proceedings of the Institution of Mechanical Engineers, Part P, vol. 233: 1, pp. 86-100.  

Petrone, N. , Candiotto, G. , Marzella, E. , Uriati, F. , Carraro, G. , Bäckström, M. & Koptyug, A. (2019). Feasibility of using a novel instrumented human head surrogate to measure helmet, head and brain kinematics and intracranial pressure during multidirectional impact tests. Journal of Science and Medicine in Sport, vol. 22: S1, pp. S78-S84.    

Laptev, R. , Pushilina, N. , Kashkarov, E. , Syrtanov, M. , Stepanova, E. , Koptyug, A. & Lider, A. (2019). Influence of beam current on microstructure of electron beam melted Ti-6Al-4V alloy. Progress in Natural Science, vol. 29: 4, pp. 440-446.    

Popov, V. V. , Katz-Demyanetz, A. , Koptioug, A. & Bamberger, M. (2019). Selective electron beam melting of Al0.5CrMoNbTa0.5 high entropy alloys using elemental powder blend. Heliyon, vol. 5: 2    

Sukhovey, Y. G. & Kostolomova, E. (2019). Difference between the biologic and chronologic age as an individualized indicator for the skin care intensity selection : skin topography and immune system state studies, parameter correlations with age difference. Biomedical Dermatology, vol. 3  

Radulov, I. A. , Popov, V. J. , Koptioug, A. , Maccari, F. , Kovalevsky, A. , Essel, S. , Gassmann, J. , Skokov, K. P. & et al. (2019). Production of net-shape Mn-Al permanent magnets by electron beam melting. Additive Manufacturing, vol. 30  

Lintzén, N. , Danvind, J. , Melin Söderström, E. , Nilsson, K. & Skoglund, P. (2019). Laboratory Investigation of Different Insulating Materials Used for Snow Storage. Journal of cold regions engineering, vol. 33: 4  

Surmeneva, M. , Lapanje, A. , Chudinova, E. , Ivanova, A. , Koptioug, A. , Loza, K. , Prymak, O. , Epple, M. & et al. (2019). Decreased bacterial colonization of additively manufactured Ti6Al4V metallic scaffolds with immobilized silver and calcium phosphate nanoparticles. Applied Surface Science, vol. 480, pp. 822-829.  

Chudinova, E. A. , Surmeneva, M. A. , Timin, A. S. , Karpov, T. E. , Wittmar, A. , Ulbricht, M. , Ivanova, A. , Loza, K. & et al. (2019). Adhesion, proliferation, and osteogenic differentiation of human mesenchymal stem cells on additively manufactured Ti6Al4V alloy scaffolds modified with calcium phosphate nanoparticles. Colloids and Surfaces B, vol. 176, pp. 130-139.  

Sukhovei, Y. , Kostolomova, E. , Unger, I. , Koptioug, A. & Kaigorodov, D. (2019). Difference between the biologic and chronologic age as an individualized indicator for the skin care intensity selection : skin topography and immune system state studies, parameter correlations with age difference. Biomedical Dermatology, vol. 3  

Roos, S. , Botero Vega, C. A. , Danvind, J. , Koptioug, A. & Rännar, L. (2019). Macro- and Micromechanical Behavior of 316LN Lattice Structures Manufactured by Electron Beam Melting. Journal of materials engineering and performance (Print), vol. 28: 12, pp. 7290-7301.    

Norris, K. , Mishukova, O. I. , Zykwinska, A. , Colliec-Jouault, S. , Sinquin, C. , Koptioug, A. , Cuenot, S. , Kerns, J. G. & et al. (2019). Marine Polysaccharide-Collagen Coatings on Ti6Al4V Alloy Formed by Self-Assembly. Micromachines, vol. 10: 1    

Pushilina, N. , Syrtanov, M. , Kashkarov, E. , Murashkina, T. , Kudiiarov, V. , Laptev, R. , Lider, A. & Koptioug, A. (2018). Influence of Manufacturing Parameters on Microstructure and Hydrogen Sorption Behavior of Electron Beam Melted Titanium Ti-6Al-4V Alloy. Materials, vol. 11: 5    

Douglas, T. E. L. , Hempel, U. , Żydek, J. , Vladescu, A. , Pietryga, K. , Kaeswurm, J. A. H. , Buchweitz, M. , Surmenev, R. A. & et al. (2018). Pectin coatings on titanium alloy scaffolds produced by additive manufacturing : Promotion of human bone marrow stromal cell proliferation. Materials letters (General ed.), vol. 227, pp. 225-228.  

Ainegren, M. , Jensen, K. & Rosdahl, H. (2018). Breathing resistance in automated metabolic systems is high in comparison with the Douglas Bag method and previous recommendations. Proceedings of the Institution of Mechanical Engineers, Part P, vol. 232: 2, pp. 122-130.  

Lund Ohlsson, M. , Danvind, J. & Holmberg, L. J. (2018). Shoulder and Lower Back Joint Reaction Forces in Seated Double Poling. Journal of Applied Biomechanics, vol. 34: 5, pp. 369-376.    

Popov, V. , Koptioug, A. , Radulov, I. , Maccari, F. & Muller, G. (2018). Prospects of additive manufacturing of rare-earth and non-rare-earth permanent magnets. Procedia Manufacturing, vol. 21, pp. 100-108.    

Olsén, J. , Shen, Z. , Liu, L. , Koptyug, A. & Rännar, L. (2018). Micro- and macro-structural heterogeneities in 316L stainless steel prepared by electron-beam melting. Materials Characterization, vol. 141, pp. 1-7.    

Pushilina, N. , Panin, A. , Syrtanov, M. , Kashkarov, E. , Kudiiarov, V. , Perevalova, O. , Laptev, R. , Lider, A. & et al. (2018). Hydrogen-induced phase transformation and microstructure evolution for Ti-6Al-4V parts produced by electron beam melting. Metals, vol. 8: 5    

Zhong, Y. , Rännar, L. , Wikman, S. , Koptyug, A. , Liu, L. , Cui, D. & Shen, Z. (2017). Additive manufacturing of ITER first wall panel parts by two approaches : Selective laser melting and electron beam melting. Fusion engineering and design, vol. 116, pp. 24-33.  

Zhong, Y. , Rännar, L. , Liu, L. , Koptyug, A. , Wikman, S. , Olsen, J. , Cui, D. & Shen, Z. (2017). Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications. Journal of Nuclear Materials, vol. 486, pp. 234-245.  

Chudinova, E. , Surmeneva, M. , Koptyug, A. , Selezneva, I. , Skoglund, P. , Syrtanov, M. & Surmenev, R. (2017). In Vitro Assessment of Hydroxyapatite Coating on the Surface of Additive Manufactured Ti6Al4V Scaffolds. Materials Science Forum, vol. 879, pp. 2444-2449.  

Surmeneva, M. A. , Surmenev, R. , Chudinova, E. A. , Koptioug, A. , Tkachev, M. S. , Gorodzha, S. N. & Rännar, L. (2017). Fabrication of multiple-layered gradient cellular metal scaffold via electron beam melting for segmental bone reconstruction. Materials & design, vol. 133, pp. 195-204.  

Sundström, D. & Bäckström, M. (2017). Optimization of pacing strategies for variable wind conditions in road cycling. Proceedings of the Institution of Mechanical Engineers, Part P, vol. 231: 3, pp. 184-199.  

Douglas, T. , Hempel, U. , Żydek, J. , Buchweitz, M. , Surmenev, R. , Surmeneva, M. , Koptioug, A. & Pamula, E. (2017). Pectin Coatings on Titanium Alloy Samples Produced by Additive Manufacturing : Promotion of Human Bone Marrow Stromal Cell Proliferation. Engineering of Biomaterials, vol. 143, pp. 43

Klingvall Ek, R. , Hong, J. , Thor, A. , Bäckström, M. & Rännar, L. (2017). Micro- to Macroroughness of Additively Manufactured Titanium Implants in Terms of Coagulation and Contact Activation. International Journal of Oral & Maxillofacial Implants, vol. 32: 3, pp. 565-574.  

Koptioug, A. , Rännar, L. , Bäckström, M. & Surmenev, R. (2017). Additive manufacturing in metal : technology advances generate new research challenges. Nanotechnology. Development and Applications - XXI Century, , pp. 12-24.

Rännar, L. , Koptioug, A. , Olsén, J. , Saeidi, K. & Shen, Z. (2017). Hierarchical structures of stainless steel 316L manufactured by Electron Beam Melting. Additive Manufacturing, vol. 17, pp. 106-112.  

Vladescu, A. , Vranceanu, D. , Kulesza, S. , Ivanov, A. , Bramowicz, M. , Fedonnikov, A. , Braic, M. , Norkin, I. & et al. (2017). Influence of the electrolyte’s pH on the properties of electrochemically deposited hydroxyapatite coating on additively manufactured Ti64 alloy. Scientific Reports, vol. 7: 1    

Koptyug, A. & Burkett, B. (2016). Editorial for the special issue technology for disability sport. Sports Engineering, vol. 19: 3, pp. 139-139.    

Sundström, D. (2016). Anpassa farten för snabbare tider. Svensk Idrottsforskning,  

Koptyug, A. , Rännar, L. , Bäckström, M. & Shen, Z. (2016). New Metallurgy of Additive Manufacturing in Metal : Experiences from the Material and Process Development with Electron Beam Melting Technology (EBM). Materials Science Forum, vol. 879, pp. 996-1001.  

Sukhovey, Y. G. , Koptyug, A. , Fisher, T. A. , Petrov, S. A. & Dotsenko, E. L. (2016). Functional Conjugation of the Different Regulatory Responses to the Stress Stimuli in Healthy Human Subjects. Open Journal of Applied Sciences, vol. 6, pp. 489-500.    

Thor, A. , Palmquist, A. , Hirsch, J. , Rännar, L. , Derand, P. & Omar, O. (2016). Clinical, Morphological, and Molecular Evaluations of Bone Regeneration With an Additive Manufactured Osteosynthesis Plate. The Journal of craniofacial surgery (Print), vol. 27: 7, pp. 1899-1904.  

Ek, R. , Rännar, L. , Bäckström, M. & Carlsson, P. (2016). The Effect of EBM Process Parameters upon Surface Roughness. Rapid prototyping journal, vol. 22: 3, pp. 495-503.  

Hofmann, K. B. , Ohlsson, M. L. , Höök, M. , Danvind, J. & Kersting, U. G. (2016). The influence of sitting posture on mechanics and metabolic energy requirements during sit-skiing : a case report. Sports Engineering, vol. 19: 3, pp. 213-218.  

Sundström, D. (2016). On a bioenergetic four compartment model for human exercise. Sports Engineering, vol. 19: 4, pp. 251-263.  

Huo, J. , Derand, P. , Rännar, L. , Hirsch, J. & Gamstedt, E. K. (2015). Failure location prediction by finite element analysis for an additive manufactured mandible implant. Medical Engineering & Physics, vol. 37: 9, pp. 862-869.  

Cronskär, M. , Rännar, L. , Bäckström, M. , Nilsson, K. G. & Samuelsson, B. (2015). Patient-Specific Clavicle Reconstruction Using Digital Design and Additive Manufacturing. Journal of mechanical design (1990), vol. 137: 11  

Cronskär, M. (2015). Combined finite element and multibody musculoskeletal investigation of a fractured clavicle with reconstruction plate. Computer Methods in Biomechanics and Biomedical Engineering, vol. 18: 7, pp. 740-748.    

Cronskär, M. (2015). Strength analysis of clavicle fracture fixation devices and fixation techniques using finite element analysis with musculoskeletal force input. Medical and Biological Engineering and Computing, vol. 53: 8, pp. 759-769.    

Bujtar, P. , Simonovics, J. , Koptyug, A. , George, S. & Varadi, K. (2014). Emerging manufacturing bioengineering technologies 2: Scaffold designing experiment using titanium scaffolds. British Journal of Oral & Maxillofacial Surgery, vol. 52: 8, pp. e60-e61.  

Sundström, D. , Carlsson, P. & Tinnsten, M. (2014). Comparing bioenergetic models for the optimisation of pacing strategy in road cycling. Sports Engineering, vol. 17: 4, pp. 207-215.    

Koptyug, A. , Bergemann, C. , Lange, R. , Jaggi, V. , Rännar, L. & Nebe, J. B. (2014). Osteoblast Ingrowth into Titanium Scaffolds made by Electron Beam Melting. Materials Science Forum, vol. 783-786, pp. 1292-1297.  

Koptyug, A. , Rännar, L. , Bäckström, M. & Cronskär, M. (2014). Additive Manufacturing for Medical and Biomedical Applications: Advances and Challenges. Materials Science Forum, , pp. 1286-1291.

Ainegren, M. , Carlsson, P. , Laaksonen, M. S. & Tinnsten, M. (2014). The influence of grip on oxygen consumption and leg forces when using classical style roller skis. Scandinavian Journal of Medicine and Science in Sports, vol. 24: 2, pp. 301-310.  

Sukhovey, Y. , Koptyug, A. , Petrov, S. A. , Dotsenko, E. L. & Fisher, T. A. (2014). Psycho-immune Partnership in the Dynamic Responses of Living Systems. International Journal of Life Science and Medical Research, vol. 4: 5, pp. 57-50.    

Koptyug, A. , Rännar, L. , Bäckström, M. , Fager Franzén, S. & Dérand, P. (2013). Additive Manufacturing Technology Applications Targeting Practical Surgery. International Journal of Life Science and Medical Research, vol. 3: 1, pp. 15-24.    

Troynikov, O. , Wardiningsih, W. , Koptyug, A. , Watson, C. & Oggiano, L. (2013). Influence of Material Properties and Garment Composition on Pressure Generated by Sport Compression Garments. Procedia Engineering, vol. 60, pp. 157-162.  

Tesch, P. , Pozzo, M. , Ainegren, M. , Swarén, M. & Linnehan, R. M. (2013). Cardiovascular responses to rowing on a novel ergometer designed for both resistance and aerobic training in space. Aviation, Space and Environmental Medicine, vol. 84: 5, pp. 516-521.  

Elmer, S. , Danvind, J. & Holmberg, H. (2013). Development of a novel eccentric arm cycle ergometer for training the upper body. Medicine & Science in Sports & Exercise, vol. 45: 1, pp. 206-211.  

Sundström, D. , Carlsson, P. , Ståhl, F. & Tinnsten, M. (2013). Numerical optimization of pacing strategy in cross-country skiing. Structural and multidisciplinary optimization (Print), vol. 47: 6, pp. 943-950.    

Cronskär, M. , Rännar, L. & Bäckström, M. (2013). Production of Customized Hip Stem Prostheses : a Comparison Between Machining and Additive Manufacturing. Rapid prototyping journal, vol. 19: 5, pp. 365-372.  

Ainegren, M. , Carlsson, P. , Tinnsten, M. & Laaksonen, M. S. (2013). Skiing economy and efficiency in recreational and elite cross-country skiers. Journal of Strength and Conditioning Research, vol. 27: 5, pp. 1239-1252.  

Ainegren, M. , Carlsson, P. & Tinnsten, M. (2013). An experimental study to compare the grip of classical style roller skis with on-snow skiing. Sports Engineering, vol. 16: 2, pp. 115-122.  

Holmberg, J. , Lund Ohlsson, M. , Supej, M. & Holmberg, H. (2013). Skiing efficiency versus performance in double-poling ergometry. Computer Methods in Biomechanics and Biomedical Engineering, vol. 16: 9, pp. 987-992.  

Dérand, P. , Rännar, L. & Hirsch, J. (2012). Imaging, virtual planning, design and production of patient specific implants and clinical validation in cranio-maxillo-facial surgery. Cranial maxillofacial Trauma and Reconstruction, vol. 5: 3, pp. 137-144.  

Cronskär, M. , Rännar, L. & Bäckström, M. (2012). Implementation of digital design and solid free-form fabrication for customization of implants in trauma orthopaedics. Journal of medical and biological engineering, vol. 32: 2, pp. 91-96.  

Rasmussen, J. , Holmberg, L. J. , Sørensen, K. , Kwan, M. , Andersen, M. S. & De Zee, M. (2012). Performance optimization by musculoskeletal simulation. Science et Motricite, vol. 75, pp. 73-83.  

Koptyug, A. , Bäckström, M. , Tinnsten, M. & Carlsson, P. (2012). Cross-country ski vibrations and possible mechanisms of their influence on the free gliding. Procedia Engineering, vol. 34, pp. 473-478.    

Holmberg, L. J. & Klarbring, A. (2012). Muscle decomposition and recruitment criteria influence muscle force estimates. Multibody system dynamics, vol. 28: 3, pp. 283-289.  

Koptyug, A. , Bäckström, M. & Rännar, L. (2012). Tin Man- Making Spare Parts for Human Body. Science First Hand, vol. 44: 2, pp. 45-57.

Holmberg, L. J. , Ohlsson, M. & Danvind, J. (2012). Musculoskeletal simulations : a complementary tool for classification of athletes with physical impairments. Prosthetics and Orthotics International, vol. 36: 3, pp. 396-397.  

Laaksonen, M. , Ainegren, M. & Lisspers, J. (2011). Evidence of improved shooting precision in biathlon after 10-weeks of combined relaxation and specific shooting training. Cognitive Behaviour Therapy, vol. 40: 4, pp. 237-250.  

Carlsson, P. , Tinnsten, M. & Ainegren, M. (2011). Numerical Simulation of Cross Country Skiing. Computer Methods in Biomechanics and Biomedical Engineering, vol. 14: 8, pp. 741-746.  

Koptyug, A. , Mamontov, E. & Sukhovey, Y. (2011). Dynamic modeling of tumor development. Science First Hand, vol. 6: 42, pp. 44-51.

Koptyug, A. , Mamontov, E. & Sukhovey, Y. (2011). Towards personalised medicine : Problems of the drug therapy of cancer. Science First Hand, vol. 38: 2, pp. 91-97.

Stöggl, T. , Mueller, E. , Ainegren, M. & Holmberg, H. (2011). General strength and kinetics: fundamental to sprinting faster in cross country skiing?. Scandinavian Journal of Medicine and Science in Sports, vol. 21: 6, pp. 791-803.  

Kuzmin, L. , Carlsson, P. & Tinnsten, M. (2010). The relationship between the type of machining of the ski running surface and its wettability and capillary drag. Sports Technology, vol. 3: 2, pp. 121-130.  

Ainegren, M. , Carlsson, P. & Tinnsten, M. (2009). Roller ski rolling resistance and its effects on elite athletes’ performance. Sports Engineering, vol. 11: 3, pp. 143-157.  

Sidén, J. , Fein, M. , Koptyug, A. & Nilsson, H. (2008). Logos as RFID Tag Antennas. International Journal on Wireless and Optical Communications RFID special issue, vol. 5: 1, pp. 85-96.

Piotrowska, M. , Mamontov, E. , Peterson, A. & Koptyug [Koptioug], A. (2008). A model and simulation for homeorhesis in the motion of a single individual. Mathematical and computer modelling, vol. 48: 7-8, pp. 1122-1143.  

Svoboda, A. , Tatar, K. , Norman, P. & Bäckström, M. (2008). Integrated approach for prediction of stability limits for machining with large volumes of material removal. International Journal of Production Research, vol. 46: 12, pp. 3207-3222.  

Holmberg, J. & Lund, M. (2008). A Musculoskeletal Full‐body Simulation of Cross‐Country Skiing. Proceedings of the Institution of Mechanical Engineers, Part P, vol. 222: P1, pp. 11-22.  

Ainegren, M. , Carlsson, P. & Tinnsten, M. (2008). Rolling resistance for treadmill roller skiing. Sports Engineering, vol. 11: 1, pp. 23-29.  

Sidén, J. , Fein, M. , Koptioug, A. & Nilsson, H. (2007). Printed Antennas with Variable Conductive Ink Layer Thickness. IET Microwaves, Antennas & Propagation, vol. 1: 2, pp. 401-407.  

Nilsson, H. , Sidén, J. , Olsson, T. , Jonsson, P. & Koptoiug, A. (2007). Evaluation of a printed patch antenna for robust microwave RFID tags. IET Microwaves, Antennas & Propagation, vol. 1: 3, pp. 776-781.  

Rännar, L. , Glad, A. & Gustafson, C. (2007). Efficient cooling with tool inserts manufactured by electron beam melting. Rapid prototyping journal, vol. 13: 3, pp. 128-135.  

Carlsson, P. & Tinnsten, M. (2007). Geometrical compensation for varying material properties in bows by the use of numerical optimization. Acta Acoustica united with Acustica, vol. 93: 1, pp. 145-151.

Koptyug, A. , Ananiev, L. & Äström, J. (2006). How to Make Perfect Snow. Science First Hand, : 1 (7), pp. 122-133.  

Kuzmin, L. & Tinnsten, M. (2006). Dirt absorption on the ski running surface - quantification and influence on the gliding ability. Sports Engineering, vol. 9: 3, pp. 137-146.  

Mamontov, E. , Koptioug, A. & Psiuk-Maksymowicz, K. (2006). The minimal, phase-transition model for the cell-number maintenance by the hyperplasia-extended homeorhesis. Acta Biotheoretica, vol. 54: 2, pp. 61-101.  

Mamontov, E. , Psiuk-Maksymowicz, K. & Koptioug, A. (2006). Stochastic mechanics in the context of the properties of living systems. Mathematical and computer modelling, vol. 44: 7-8, pp. 595-607.  

Norman, P. , Bäckström, M. , Rantatalo, M. , Svoboda, A. & Kaplan, A. (2006). A sophisticated platform for characterization, monitoring and control of machining. Measurement science and technology, vol. 17: 4, pp. 847-854.  

Bäckström, M. , Koptioug, A. & Tinnsten, M. (2006). People and Skis. Science-First Hand, : 3, pp. 110-125.  

Olsson, T. , Sidén, J. & Koptioug, A. (2005). Robustness comparison of bow-tie and dipole antennas. IEE Proceedings - Microwaves Antennas and Propagation, vol. 151: 6, pp. 525-529.  

Olsson, T. & Koptioug, A. (2005). Statistical analysis of antenna robustness. IEEE Transactions on Antennas and Propagation, vol. 53: 1, pp. 566-568.  

Mamontov, E. , Psiuk-Maksymowicz, K. & Koptioug, A. (2005). What Stochastic Mechanics is Relevant to the Study of Living Systems?. Proceedings of the Latvian Academy of Sciences. Section B, vol. 59: 6 (641), pp. 255-262.  

Bäckström, M. & Wiklund, H. (2004). QFD as a tool to improve quality control in a complex manufacturing environment. The Asian Journal on Quality, vol. 5: 1, pp. 10-22.

Tinnsten, M. , Dahlén, L. , Holmberg, J. & Holmberg, H. C. (2004). Projekt Davos : hjälper längdlandslaget att åka fortare. Svensk Idrottsforskning, vol. 13: 1, pp. 25-27.

Havila, V. , Johanson, J. & Thilenius, P. (2004). International business-relationship triads. International Marketing Review, vol. 21: 2, pp. 172-186.  

Djalili-Moghaddam, M. & Ebrahimzadeh, P. R. (2004). Study of geometry effects in torsional rheometry of fibre suspensions. Rheologica Acta, vol. 44: 44, pp. 29-37.  

Carlsson, P. & Tinnsten, M. (2003). Optimization of a violin top with a combined laminate and honeycomb model of the wood material. Holzforschung, vol. 57: 1, pp. 101-105.  

Carlsson, P. & Tinnsten, M. (2003). A distributed computing system used for concurrent optimization methods on a violin top. Structural and multidisciplinary optimization (Print), vol. 25: 5/6, pp. 453-458.  

Dahlén, L. & Carlsson, P. (2003). Numerical optimization of a distributor valve. International Journal of Fluid Power, vol. 4: 3, pp. 17-25.

Geldart, M. , Webb, P. , Larsson, H. , Bäckström, M. , Gindy, N. & Rask, K. (2003). A direct comparison of the machining performance of a variax 5 axis parallel kinetic machining centre with conventional 3 and 5 axis machine tools.. International journal of machine tools & manufacture, vol. 43: 11, pp. 1107-1116.

Koptioug, A. , Foster, M. , Grigor’ev, I. , Lurie, D. , Khramtsov, V. , McCallum, S. , Panagiotelis, I. & Nicholson, I. (2003). In Vivo Detection of a pH-Sensitive Nitroxide in the Rat Stomach by Low-Field ESR-Based Techniques. Magnetic Resonance in Medicine, vol. 49: 3, pp. 558-567.  

Koptioug, A. , Reijerse, E. & Klaassen, A. A. K. (2002). Application of Time-Variable Feedback to the Input Amplifier of Pulse Magnetic Resonance Spectrometers : Experimental Studies. Applied Magnetic Resonance, vol. 22: 4, pp. 455-473.  

Koptioug, A. (2002). Application of the Time-Variable Feedback to the Input Amplifiers of Pulse Magnetic Resonance Spectrometers : Theoretical Considerations. Applied Magnetic Resonance, vol. 22: 22/4, pp. 513-537.

Hemp, J. , Sanderson, M. L. , Koptioug, A. , Liang, B. , Sweetland, D. J. & Al Rabeh, L. H. (2002). Problems in the Theory and Design of Electromagnetic Flowmeters for Dielectric Fluids : Part 1: Experimental Assessment of Static Charge Noise Levels and Signal-to-Noise Ratio. Flow Measurement and Instrumentation, vol. 13: 4, pp. 143-145.  

Carlsson, P. & Tinnsten, M. (2002). Optimization of Drying Schedules Adapted for a Mixture of Bords with Distribution of Sapwood and Heartwood. Drying Technology, vol. 20: 2, pp. 403-418.  

Tinnsten, M. & Carlsson, P. (2002). Numerical optimization of violin top plates. Acta Acoustica united with Acustica, vol. 88, pp. 278-285.

Tinnsten, M. , Carlsson, P. & Jonsson, M. (2002). Stochastic optimization of acoustic response : a numerical and experimental comparison. Structural and multidisciplinary optimization (Print), vol. 23: 6, pp. 405-411.  

Dahlén, L. & Isaksson, O. (2001). Vegetable and synthetic hydraulic fluids to improve the overall efficiency of a hydrostatic transmission. Journal of Synthetic Lubrication, vol. 17: 4, pp. 263-276.  

Tinnsten, M. , Jonsson, M. & Johansson, O. (2001). Prediction and verification of acoustic radiation. Acustica - Acta Acustica, vol. 87: 1, pp. 117-127.

Carlsson, P. (2001). Distributed optimization with a two-dimensional drying model of a board, built up by sapwood and heartwood. Holzforschung, vol. 55: 4, pp. 426-432.  

Carlsson, P. & Arfvidsson, J. (2000). Optimized wood drying. Drying Technology, vol. 18: 8, pp. 1779-1796.  

Ebrahimzadeh, R. (2000). Neutrophil chemotaxis in moving gradients of fMLP. JOURNAL OF LEUKOCYTE BIOLOGY, vol. 67: 5, pp. 651-661.

Tinnsten, M. (2000). Optimization of acoustic response : a numerical and experimental comparison. Structural and multidisciplinary optimization (Print), vol. 19: 2, pp. 122-129.  

Tinnsten, M. , Esping, B. & Jonsson, M. (1999). Optimization of acoustic response. Structural Optimization, vol. 18: 1, pp. 36-47.  

Ebrahimzadeh, R. (1999). The initiation of the neutrophil chemotactic response in filters. Journal of Leukocyte Biology, vol. 66: 1, pp. 90-94.

Koptioug, A. (1998). New Transmission Line Resonators for ESE. EPR Newsletter, vol. 9: 3, pp. 20-22.

Carlsson, P. , Esping, B. , Dahlblom, O. , Ormarsson, S. & Söderström, O. (1998). Optimization, a tool with which to create an effective drying schedule. Holzforschung, vol. 52: 5, pp. 530-540.

Ebrahimzadeh, R. & Braide, M. (1998). Neutrophil chemotaxis is preceded by a 15-20 minute adaptation phase of random migration. JOURNAL OF LEUKOCYTE BIOLOGY, vol. 1, pp. 23-32.

Ebrahimzadeh, P. & McQueen, D. (1998). A model of the dynamic mechanical responses of wood, paper and some polymers to moisture changes. Journal of Materials Science, vol. 33: 5, pp. 1201-1209.

Ebrahimzadeh, P. (1998). Effect of impregnation on mechanosorption in wood and paper studied by dynamic mechanical analysis. Wood Science and Technology, vol. 32: 2, pp. 101-118.

Bäckström, M. & Wiklund, H. (1998). Development of a multi-tooth approach to tool condition monitoring in milling. Insight, vol. 40: 8, pp. 548-552.

Carlsson, P. & Esping, B. (1997). Optimization of the wood drying process. Structural Optimization, vol. 14: 4, pp. 232-241.  

Ebrahimzadeh, P. & Kubat, J. (1997). Mechanosorptive effects in cellophane, polyamide 6 and some other polymers studied by dynamic mechanical analysis. Journal of Materials Science, vol. 32: 16, pp. 4227-4235.

Koptioug, A. , Reijerse, E. & Klaassen, A. K. (1997). New Transmission-Line Resonator for Pulsed EPR. Journal of magnetic resonance, : 125, pp. 369-371.  

Koptyug, A. (1997). Optical Detection of EPR Spectra of Radical-Ion Pairs in Weak Magnetic Fields. Doklady Akademii Nauk, vol. 297: 6, pp. 1414-1417.  

Ebrahimzadeh, P. , Kubat, J. & McQueen, D. (1996). Dynamic mechanical characterization of mechanosorptive effects in wood and paper. European Journal of Wood and Wood Products, vol. 54: 4, pp. 263-271.

Ebrahimzadeh, P. , Bazargani, F. , Afzal, F. , Hogfors, C. & Braide, M. (1996). A subpopulation analysis of f-MLP stimulated granulocytes migrating in filters. Biorheology, vol. 33: 3, pp. 231-250.

Carlsson, P. , Tinnsten, M. & Esping, B. (1995). Optimization of a racing ski : Brief notes. Structural Optimization, vol. 10: 1, pp. 61-63.  

Ebrahimzadeh, P. , Braide, M. , Strid, K. & Bjursten, L. (1994). MIGRATION OF HUMAN GRANULOCYTES IN FILTERS - EFFECTS OF GRAVITY AND MOVABLE GRADIENTS OF F-MLP. Biorheology, vol. 31: 6, pp. 617-630.

Koptyug, A. & Grishin, Y. (1994). S-band magnetron-based accessory for optical detection of ESR spectra of radiation-induced radical-ion pairs. Measurement science and technology, vol. 5: 4, pp. 363-370.  

Koptyug, A. & Sörman, E. (1994). A Method of Altering the Modulation Type and frequency of Commercial ESR Spectrometers :  . Measurement science and technology, vol. 5: 7, pp. 797-780.  

Ebrahimzadeh, P. & Kubat, D. (1993). EFFECTS OF HUMIDITY CHANGES ON DAMPING AND STRESS-RELAXATION IN WOOD. Journal of Materials Science, vol. 28: 20, pp. 5668-5674.

Koptioug, A. , Antzutkin, O. , Lindgren, M. & Lund, A. (1993). Optically detected ESR (OD ESR) of radical-ion pairs in coloured solutions : Observation of transient Trans-Azobenzene Radical Cation. Applied Magnetic Resonance, vol. 5: 1, pp. 77-86.  

Morozov, V. A. , Koptyug, A. , Doktorov, A. B. & Molin, Y. (1992). Dynamic theory of optically detected electron-nuclear double resonance of radical pairs (OD ENDOR) in liquid solutions. Chemical Physics, vol. 165: 2-3, pp. 297-312.

Morozov, V. A. , Antzutkin, O. , Koptyug, A. & Doktorov, A. B. (1991). Multiquantum resonances in low-field optically detected ESR of radical-ion pairs. Molecular Physics, vol. 73: 3, pp. 517-540.  

Koptioug, A. , Saik, V. , Anisimov, O. & Molin, Y. (1990). Quantum beats in singlet-triplet transitions of radical pairs induced by a radio-frequency field. Chemical Physics Letters, vol. 165: 2-3, pp. 142-145.  

Koptioug, A. , Saik, V. , Anisimov, O. , Molin, Y. & Antzutkin, O. (1990). Effect of External Magnetic Fields and Resonance Radio frequency Radiation on Radical Reactions. Physica. B, Condensed matter, vol. 164: 1-2, pp. 200-204.  

Koptyug, A. , Saik, V. , Anisimov, O. & Molin, Y. (1989). Spin-locking in concentration-narrowed OD ESR spectra. Chemical Physics, vol. 138: 1, pp. 173-178.  

Koptyug, A. (1988). Weak Field ESR Spectrometer. Transactions of Siberian Branch of the USSR Academy of Sciences, vol. 1, pp. 121-124.

Koptyug, A. (1987). Optical Detection of the Radical-Ion Pair Spectra in Weak Magnetic Fields. Doklady Akademii Nauk, vol. 297: 6, pp. 1414-1418.  

Molin, N. , Tinnsten, M. , Wiklund, U. & Jansson, E. V. (1986). A violin maker's practical test of wood properties suggested from FEM-analysis of an orthotropic shell. Journal of the Catgut Acoustical Society, vol. 46, pp. 24-29.

Klingvall Ek, R. , Bäckström, M. & Rännar, L. (). Influence of the surface topography of additive manufactured Ti6A14V on fatigue and calculations of the stress concentration factor. ,

Klingvall Ek, R. , Bäckström, M. & Rännar, L. (). Fatigue properties of electrochemical polished and hot isostatic pressed Ti6A14V manufactured by electron beam melting. ,

Articles, reviews/surveys

Popov, V. V. J. , Muller-Kamskii, G. , Katz-Demyanetz, A. , Kovalevsky, A. , Usov, S. , Trofimcow, D. , Dzhenzhera, G. & Koptioug, A. (2019). Additive manufacturing to veterinary practice : recovery of bony defects after the osteosarcoma resection in canines. BIOMEDICAL ENGINEERING LETTERS, vol. 9: 1, pp. 97-108.    

Katz-Demyanetz, A. , Popov, V. V. J. , Kovalevsky, A. , Safranchik, D. & Koptioug, A. (2019). Powder-bed additive manufacturing for aerospace application : Techniques, metallic and metal/ceramic composite materials and trends. MANUFACTURING REVIEW, vol. 6    

Greenslade, D. , Koptyug, A. & Symons, M. (1995). Aspects of low-frequency low-field electron spin resonance. Royal Society of Chemistry. Annual Reports on the Progress of Chemistry. Section C: Physical Chemistry, vol. 92, pp. 3-21.  

Chapters in books

Koptioug, A. & Bäckström, M. (2023). Body Part Surrogates for Medicine, Comfort and Safety Applications. In Advances in 3D Printing. Rijeka : IntechOpen.  

Hirsch, J. , Palmquist, A. , Rännar, L. & Thieringer, F. M. (2020). Additive manufacturing and 3D printing. In Lasers in Oral and Maxillofacial Surgery. Springer. pp. 227-237.  

Carlsson, P. , Ainegren, M. , Tinnsten, M. , Sundström, D. , Esping, B. , Koptioug, A. & Bäckström, M. (2015). Cross-Country Ski. In The Engineering Approach to Winter Sports. Springer. pp. 107-152.    

Ainegren, M. , Rännar, L. , Carlsson, P. & Tinnsten, M. (2013). The multifunctional roller ski. In Science and Nordic Skiing II. University of Salzburg, University of Jyväskylä. pp. 253-261.

Bäckström, M. , Kuzmin, L. , Rännar, L. & Wiklund, H. (2009). Critical Factors Influencing Loss of Time after Shooting - A Case Study Performed During the 2008 IBU Biathlon World Championships. In The Impact of Technology on Sport III.. pp. 33-37.

Kuzmin, L. , Dahlén, L. , Ebrahimzadeh, R. & Wiklund, H. (2009). Comparison of Ski Running Surfaces Machined by Various Stone Grinding Equipments. In The Impact of Technology on Sport III. Melbourne, Australia : RMIT University. pp. 27-31.

Kuzmin, L. & Tinnsten, M. (2007). The contamination, wettability and gliding ability of ski running surfaces. In Science and Nordic Skiing. Oxford : Meyer & Meyer Sport. pp. 340-.

Kuzmin, L. & Tinnsten, M. (2005). Contact angels on the running surface of cross-country skis. In The Impact of Technology on Sport. Melbourne : Australasian Sports Technology Alliance Pty Ltd. pp. 318-323.

Conference papers

Sjöström, W. , Botero, C. , Jimenez-Pique, E. , Selte, A. & Rännar, L. (2023). Steel-based multi-material configurations by PBF-EB. Paper presented at the Alloys for Additive Manufacturing Symposium, Madrid, Spain, September 27th-29th, 2023

Zullo, G. , Baldoin, E. , Koptyug, A. , Bäckström, M. & Petrone, N. (2023). Advances in the development of a instrumented head surrogate for brain injury investigation. In Convegno Nazionale di Bioingegneria.

Botero, C. , Sjöström, W. , Jimenez-Piqué, E. , Şelte, A. & Rännar, L. (2023). PBF-EB For Manufacturing Of 3D Metal-Metal Multi Material Assemblies. In Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023.  

Sjöström, W. , Botero Vega, C. A. , Rännar, L. & Sundström, L. (2022). Local microstructural tailoring of the Z-direction in Electron Beam Melting. Paper presented at the Swedish arena for additive manufacturing of metals, Åre, Sweden, January 13-14, 2022.

Hosseini, S. B. , Mallipeddi, D. , Holmberg, J. , Rännar, L. , Koptyug, A. , Sjöström, W. , Krajnik, P. & Klement, U. (2022). Comparison of machining performance of stainless steel 316L produced by selective laser melting and electron beam melting. In Procedia CIRP.. pp. 72--77.  

Ramsberger, M. , Botero Vega, C. A. , Rännar, L. & Selte, A. (2022). Electron Beam-based Additive Manufacturing of highly alloyed cold work tool steels and tungsten carbide Metal Matrix Composites : from research to industrialization. In Proceedings.

Quiceno, E. , Botero Vega, C. A. , Rännar, L. , Castano, J. , Gomez, M. , Baena, L. , Vargas, C. , Bedoya, N. & et al. (2022). Customized Ti6Al4V implants by EBM : design, manufacturing and surface treatments. In Proceedings.. pp. 381--388.

Koptyug, A. , Botero Vega, C. A. , Sjöström, W. , Bäckström, M. , Rännar, L. & Tremsin, A. (2021). Electron Beam Melting: from Shape Freedom to Materials Properties Control at Macro- and Microscale. In Proceedings of the THERMEC 2020, Graz, Austria.. pp. 755--759.  

Lidar, J. , Sundström, D. & Ainegren, M. (2021). Impact of dynamic friction on race times in cross-country skate skiing - a numerical simulation study. In European College of Sports Science Virtual Congress, September 8-10, 2021.  

Koptyug, A. , Bäckström, M. & Olsson, V. (2020). Comparing the Performance of the Biathlon Rifles with Wooden and Titanium Frames. In Proceedings of The 13th Conference of the International Sports Engineering Association. (MDPI Proceedings)    

Ainegren, M. , Michel, F. , Klauer, R. , Kopyug, A. , Bäckström, M. , Samuelsson, D. , Ahnesjö, M. & Litzenberger, S. (2020). A Study of Skin-Close Heat and Moisture with Different Types of Backpacks in Cycling. In The 13th Conference of the International Sports Engineering Association. (MDPI Proceedings)  

Hanstock, H. , Tutt, A. , Persson, H. , Andersson, E. , Ainegren, M. & Stenfors, N. (2020). A heat-and-moisture exchanging mask may increase the physiological demands of submaximal exercise in -15 degrees Celsius.. In Book of Abstracts of the 25th Annual Congress of the European College of Sport Science – 28th - 30th October 2020.. pp. 75--76.

Tutt, A. , Persson, H. , Andersson, E. , Ainegren, M. , Stenfors, N. & Hanstock, H. (2020). Heat-and-moisture exchanging masks : Advantage or a hindrance during exercise in sub-zero conditions?. In Book of Abstracts of the 25th Annual Congress of the European College of Sport Science, 28th - 30th October, 2020... pp. 49--50.

Tutt, A. , Persson, H. , Andersson, E. , Ainegren, M. , Stenfors, N. & Hanstock, H. (2020). A heat-and-moisture-exchanging mask affects each sex differently during exercise in sub-zero conditions. Paper presented at the Nordic Winter Sports Conference 2020, [DIGITAL]  

Katz-Demyanetz, A. , Koptyug, A. & Popov, V. V. (2020). In-situ Alloying as a Novel Methodology in Additive Manufacturing. In 2020 IEEE 10th International Conference Nanomaterials : Applications and Properties", NAP 2020.  

Lund Ohlsson, M. , Steffensen, D. , Swarén, M. & Danvind, J. (2020). The impact of the arms in para alpine slalom skiing. Paper presented at the Nordic Winter Sports Conference, [DIGITAL], Oktober 1-2, 2020.

Tutt, A. , Persson, H. , Andersson, E. , Ainegren, M. , Stenfors, N. & Hanstock, H. (2020). Sex differences in muscle oxygenation during sub-zero exercise with a heat-and-moisture exchanger. Paper presented at the Nordic Winter Sports Conference 2020, [DIGITAL], 1-2 October, 2020

Björklund, G. , Danvind, J. & Sundström, D. (2019). The effect of speed and gradient on running economy and oxygen uptake during downhill running. Paper presented at the The 24th Annual Congress of the European College of Sport Science, 2019, 3-6 July, Prague, Czech Republic.

Koptyug, A. , Botero, C. , Sjöström, W. , Jimenez-Pique, E. , Şelte, A. , Asvik, K. , Rännar, L. & Bäckström, M. (2019). Steel-based functionally gradient materials obtained via Electron Beam Melting. In Proc. Alloys for Additive Manufacturing Symposium AAMS2019.

Wedeking, D. , Swarén, M. , Danvind, J. & Lund Ohlsson, M. (2019). The influence of arm and ski pole during alpine skiing. Paper presented at the VISTA 2019, Healthy and fit for optimal performance, Amsterdam, 4-7 september, 2019

Lund Ohlsson, M. , Danvind, J. & Holmberg, L. J. (2019). Estimation of muscle work in cross-country sit-skiing. Paper presented at the VISTA 2019, Healthy and fit for optimal performance, 4-7 september, 2019, Amsterdam, The Netherlands

Rännar, L. , Botero, C. , Sjöström, W. , Melin, P. , Strandh, E. , Ledford, C. & Harrysson, O. (2019). Surface topography development of Electron beam-melted materials - a historical review. In Proceedings Euromat 2019. Stockholm :  

Chudinova, E. , Surmeneva, M. , Koptioug, A. , Loza, K. , Prymak, O. , Epple, M. & Surmenev, R. (2019). Surface modification of Ti6Al4V alloy scaffolds manufactured by electron beam melting. Paper presented at the 15th International Conference of Students and Young Scientists on Prospects of Fundamental Sciences Development, PFSD 2018, 24 April 2018 through 27 April 2018    

Khrapov, D. , Surmeneva, M. , Koptioug, A. , Evsevleev, S. , Lé Onard, F. , Bruno, G. & Surmenev, R. (2019). X-ray computed tomography of multiple-layered scaffolds with controlled gradient cell lattice structures fabricated via additive manufacturing. Paper presented at the 15th International Conference of Students and Young Scientists on Prospects of Fundamental Sciences Development, PFSD 2018, 24 April 2018 through 27 April 2018    

Chudinova, E. , Surmeneva, M. , Koptioug, A. , Sokolova, V. , Prymak, O. , Bouckercha, S. , Epple, M. & Surmenev, R. (2019). Determination of the properties and loading efficiency of encapsulated BSA-FITC and dexamethasone for drug delivery systems. In IOP Conference Series : Materials Science and Engineering.    

Botero, C. , Bäckström, M. , Rännar, L. , Roos, S. , Koptyug, A. , Åsvik, K. , Şelte, A. & Ramsperger, M. (2019). Additive Manufacturing of a cold work steel using Electron Beam Melting. In Proceedings of Conference:  Tooling 2019.

Petrone, N. , Carraro, G. , Dal Castello, S. , Broggio, L. , Koptioug, A. & Bäckström, M. (2018). A Novel Instrumented Human Head Surrogate For The Impact Evaluation Of Helmets. In Proceedings, Volume 2, ISEA 2018.. pp. 269-    

Koptioug, A. , Bäckström, M. , Ainegren, M. & Nilsson, K. (2018). Studying Moisture Transport Trough "Active" Fabrics Using Humidity-Temperature Sensor Nodes. In Proceedings, Volume 2, ISEA 2018 : .. pp. 230-    

Petrone, N. , Giacomin, M. , Koptioug, A. & Bäckström, M. (2018). Racing Wheels’ Effect on Drag/Side Forces Acting on a Cyclist at Sportstech-Miun Wind Tunnel. In Proceedings, Volume 2, ISEA 2018.. pp. 210-    

Ainegren, M. & Jonsson, P. (2018). Drag Area, Frontal Area and Drag Coefficient in Cross-Country Skiing Techniques. In Proceedings, Volume 2, ISEA 2018.    

Skoglund, P. , Botero Vega, C. A. , Koptioug, A. , Rännar, L. & Bäckström, M. (2018). Possibility of the “cold start” of the build in Electron Beam Melting. Paper presented at the Materials Science & Technology, MS&T 2018, October 14-18, Columbus, USA

Botero Vega, C. A. , Jiménez-Piqué, E. , Roos, S. , Skoglund, P. , Koptioug, A. , Rännar, L. & Bäckström, M. (2018). Nanoindentation: a suitable tool in metal Additive Manufacturing. Paper presented at the Materials Science & Technology, MS&T 2018, October 14-18, Columbus, USA

Botero, C. A. , Koptyug, A. , Jiménez-Piqué, E. & Rännar, L. (2018). Microstructure and nanomechanical behavior of modified 316L-based materials fabricated using EBM. Paper presented at the 2:nd International Conference on Electron Beam Additive Manufacturing, Nuremberg, Germany, April 11, 2018

Olsén, J. , Koptioug, A. , Rännar, L. , Saedi, K. & Shen, Z. J. (2018). The Heterogenic Structure Formed During Electron Beam Melting of 316L Stainless Steel. Paper presented at the International Conference on Powder Metallurgy and Particulate Materials, (PowderMet), San Antonio, USA, June 17-20, 2018

Popov, V. , Koptyug, A. , Skokov, K. , Radulov, I. & Gutfleisch, O. (2018). Selective electron beam melting of non-rare-earth MnAl-C permanent magnets. In Proceedings: 2d International Conference on Electron Beam Additive Manufacturing, EBAM 2018.. pp. 21-

Koptioug, A. , Bäckström, M. , Botero Vega, C. A. , Popov, V. & Chudinova, E. (2018). Developing new materials for Electron Beam Melting : experiences and challenges. Paper presented at the THERMEC'2018 International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, Paris, France July 8-13, 2018  

Koptioug, A. , Rännar, L. , Botero Vega, C. A. , Bäckström, M. & Popov, V. (2018). Unique material compositions obtained by Electron beam melting of blended powders. In Euro PM2018 Proceedings.

Sundström, D. , Carlsson, P. & Andersson, E. (2018). Comparison of Power Output Estimates in Treadmill Roller-Skiing. In Proceedings. Basel :    

Lund Ohlsson, M. , Danvind, J. & Holmberg, L. J. (2017). LUMBAR SPINE REACTION FORCES IN SEATED PARA-SPORT: CROSS-COUNTRY SIT-SKIING. In Brisbane 2017 : Abstract book.  

Koptyug, A. , Rännar, L. & Bäckström, M. (2017). New Materials for Additive Manufacturing in Metal: Back to Basics?. Paper presented at the Frontiers in Materials Processing Applications, Research and Technology, FiMPART-2017, Bordeaux, France, July 9-12, 2017

Koptioug, A. , Bäckström, M. & Rännar, L. (2017). 3D-printing: a future “magic wand” for global manufacturing. How can we benefit from it today for sports and health care?. In Proceedings of the 5th International Congress on Sport Sciences Research and Technology Support, icSPORTS.

Mellin, P. , Magnusson, H. , Harlin, P. , Wikman, S. , Olsén, J. , Shen, Z. J. , Rännar, L. , Ålgårdh, J. & et al. (2017). Bonding EBM-built blocks of 316L steel, using hot isostatic pressing. In Proceedings Euro PM 2017 : International Powder Metallurgy Congress and Exhibition.

Klingvall Ek, R. , Bäckström, M. & Rännar, L. (2017). Fatigue properties of Ti-6Al-4V manufactured using electron beam melting. In Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition 2017. Brussels :

Koptyug, A. , Bäckstöm, M. & Petrone, N. (2017). Developing an Instrumented Physical Model of the Human Head for Studying Concussion Mechanisms. In Proceedingd of iSSs-  (International Ski Safety Society) : The Ski Trauma and Ski Safety Congress.

Roos, S. , Rännar, L. , Koptioug, A. & Danvind, J. (2017). Characterization of 316ln lattice structures fabricated via electron beam melting. In Materials Science and Technology Conference and Exhibition 2017, MS and T 2017.. pp. 336--343.  

Bäckström, M. , Carlsson, P. , Danvind, J. , Koptioug, A. , Sundström, D. & Tinnsten, M. (2016). A New Wind Tunnel Facility Dedicated to Sports Technology Research and Development. In Procedia Engineering. (Procedia Engineering). pp. 62--67.    

Hirsch, J. , Dérand, P. , Gamstedt, K. , Huo, J. , Omar, O. , Palmquist, A. , Thor, A. , Nysjö, F. & et al. (2016). 3D printed titanium implants i Maxillofacial surgery. Paper presented at the 12th International Bernd-Spiessl Symposium, Basel, June 16-18, 2016

Cronskär, M. , Legrell, P. , Tidehag, P. & Rännar, L. (2016). Dental Implant Manufacturing using Electron Beam Melting – Geometry Deviation from Intraoral Scanning and from Cone Beam Computed Tomography. In EBAM 2016 : 1st International Conference on Electron Beam Additive Manufacturing.  

Cronskär, M. , Legrell, P. , Tidehag, P. & Rännar, L. (2016). Dental Implant Manufacturing using Electron Beam Melting – Geometry Deviation from Intraoral Scanning and from Cone Beam Computed Tomography. Paper presented at the Odontologisk riksstämma, Älvsjö, Sweden, 16-18 November, 2016

Cronskär, M. , Rännar, L. , Hamberg, Å. , Samuelsson, B. & Nilsson, K. G. (2016). Custom design and additive manufacturingof orthopedic implants and medical models in titanium and plastics. Paper presented at the Bernd-Spiessel Symposium, Basel, Switzerland, June 16-18, 2016

Chudinova, E. , Surmeneva, M. , Koptioug, A. , Skoglund, P. & Surmenev, R. (2016). Additive manufactured Ti6Al4V scaffolds with the RF-magnetron sputter deposited hydroxyapatite coating. In Journal of Physics: Conference Series.    

Surmenev, R. , Surmeneva, M. , Chudinova, E. , Koptioug, A. , Melnikova, E. , Skoglund, P. , Prymak, O. , Epple, M. & et al. (2016). Surface modification of additive manufactured titanium with CaP, Ag nanoparticles and ultrathin HA coating. In Proceedings BIOMAH-2016.

Vranceanu, D. , Koptioug, A. , Vladescu, A. , Braic, M. , Surmenev, R. , Surmeneva, M. , Berbecaru, A. & Cotrut, C. (2016). Biofunctionalization of porous Ti6Al4V with HAp coatings obtained by electrochemical assisted deposition. In Proc. 7 th International Conference “Biomaterials, Tissue Engineering & Medical Devices” BIOMMEDD’2016.

Rännar, L. , Koptyug, A. , Bäckström, M. & Jönsson, A. (2016). Water jet polishing of materials manufactured with electron beam melting technology. Paper presented at the World Powder Metallurgy Congress, Hamburg, Germany, 9-13 October, 2016

Fisher, T. A. , Petrov, S. A. , Koptyug, A. , Sukhovey, Y. G. & Dotsenko, E. L. (2016). A way to health through psycho-immunological wellbeing : Example of Indigenous People of Russian North. In Proc. IIId Intl Conference "Psychological Health of the Person: Life Resource and Life Potential".  

Chudinova, E. , Surmeneva, M. , Koptioug, A. , Sharonova, A. , Loza, K. & Surmenev, R. (2016). Surface modification of additive manufactured Ti6Al4V alloy with Ag nanoparticles : Wettability and surface morphology study. In IOP Conference Series : Materials Science and Engineering.    

Koptyug, A. , Ainegren, M. , Bäckström, M. , Schieber, E. & Persson, J. (2016). Possibility of modern humidity sensor application in the studies ofmoisture transport through the sports and outdoor garments. In icSPORTS 2016 - Proceedings of the 4th International Congress on Sport Sciences Research and Technology Support. Portugal : (Scitepress Digital Library). pp. 51--58.  

Frisk, K. , Rännar, L. , Koptyug, A. , Petterson, N. , Persson, D. , Leicht, A. , Vattur Sundaram, M. , Hryha, E. & et al. (2016). Characterisation Of EBM-built Shelled Samples of Ti6Al4V Compacted by HIP. Paper presented at the World Powder Metallurgy Congress, Hamburg, Germany, October 9-13, 2016

Leicht, A. , Vattur Sundaram, M. , Yao, Y. , Hryha, E. , Nyborg, L. , Rännar, L. , Koptyug, A. , Frisk, K. & et al. (2016). As-HIP Microstructure of EBM Fabricated Shell Components. In Proceedings of Wolrd PM2016 - AM - Properties of Lightweight Materials ll.

Leicht, A. , Shvab, R. , Hryha, E. , Nyborg, L. & Rännar, L. (2016). Characterization of virgin and recycled 316L powder used in additive manufacturing. Paper presented at the 7th International Swedish Production Symposium, Lund, 25th - 27th of October, 2016

Sundström, D. , Bäckström, M. , Carlsson, P. & Tinnsten, M. (2015). Optimal distribution of power output and braking for corners in road cycling. Paper presented at the Science and Cycling, Utrecht 1-2 July 2015  

Sundström, D. , Bäckström, M. , Carlsson, P. & Tinnsten, M. (2015). A four compartment model on human exercise bioenergetics. In Procedia Engineering. (Procedia Engineering). pp. 4--9.    

Wikman, S. , Shen, Z. , Rännar, L. , Obitz, C. & Öijerholm, J. (2015). Assessment of additive manufacturing of 316L(N)-IG for In-Vessel components and performance of CuCrZr at coolant water interfaces. Paper presented at the 17th International Conference on Fusion Reactor Materials (ICFRM-17), Aachen, Germany, 12-16 October, 2015.

Andersson, F. , Skoglund, P. , Viktorsson, J. & Ainegren, M. (2015). A Portable Douglas Bag System. In Congress Proceedings : ICSNS 2015.. pp. 59-

Koptyug, A. & Ainegren, M. (2015). Experimental measurement of rifle dynamics during the range shooting of biathlon weapons. In Procedia Engineering : The Impact of Tecnology on Sport VI.. pp. 349--354.    

Chudinova, E. , Surmeneva, M. , Koptyug, A. , Skoglund, P. , Sharanova, A. , Loza, K. , Epple, M. & Surmenev, R. (2015). Hydroxyapatite coating and silver nanoparticles assemblies on additively manufactured Ti6Al4V scaffolds. Paper presented at the Local conference, Tomsk Polytechnic University, Tomsk, Russia  

Surmeneva, M. , Chudinova, E. , Syrtanov, M. , Koptyug, A. & Surmenev, R. (2015). Investigation of the HA film deposited on the porous Ti6Al4V alloy prepared via additive manufacturing. In IOP Conference Series : Materials Science and Engineering. IOP :    

Johansson, J. (2014). Analysing discrete event simulation modelling activities applied in manufacturing system design. In Competitive Design - Proceedings of the 19th CIRP Design Conference. (Competitive Design - Proceedings of the 19th CIRP Design Conference). pp. 512--517.

Rännar, L. & Hamberg, Å. (2014). Design and manufacture of a titanium tibial reinforcement cage using electron beam melting. Paper presented at the 5:th International Conference on Additive Technologies, Vienna, Austria, 15. - 17. October 2014

Huo, J. , Hirsch, J. , Dérand, P. , Rännar, L. & Gamstedt, K. (2014). Finite element investigation of the in-vivo failure of a titanium alloy human jaw implant. Paper presented at the International Bernd-Spiessl-Symposium 2014 for Innovative and Visionary Technologies in Cranio-Maxillofacial Surgery, Basel, Switzerland, June 19-21 2014

Skoglund, P. & Rännar, L. (2014). A survey on implementation of additive manufacturing to the manufacturing process of orthopedic and orthotic appliances. Paper presented at the 5:th International Conference on Additive Technologies, Vienna, Austria, October 16-17 2014

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2014). Gliding-induced ski vibrations : Approaching proper modeling. In Procedia Engineering. (Procedia Engineering). pp. 539--544.    

Sundström, D. , Tinnsten, M. & Carlsson, P. (2014). The influence of course bends on pacing strategy in road cycling. In Conference Proceedings of The Engineering of Sport 10. (Procedia Engineering). pp. 835--840.  

Koptyug, A. , Rännar, L. & Bäckström, M. (2014). Multiscale surface structuring of the biomedical implants manufactured in Electron Beam Melting technology : Demands, advances and challenges. In Proceedings of the 5:th International Conference in Additive Technologies.. pp. 37--42.

Hirsch, J. , Carlbom, I. , Dérand, P. , Nysjö, F. , Nyström, I. , Olsson, P. & Rännar, L. (2013). Virtual planning, additive manufacturing of biomaterials and real time reconstructive maxillofacial surgery. Paper presented at the 27:th International College for Maxillo-Facial-Surgery (ICMFS), Bad Hofgastein, Austria, March 4-9, 2013

Wikman, S. , Cui, D. , Shen, J. , Bin, Q. & Rännar, L. (2013). ON 3D ADDITIVE MANUFACTURING ITER COMPONENTS. Paper presented at the 16th International Conference On Fusion Reactor Materials; 20-26 October, 2013; Beijing, China

Koptyug, A. , Rännar, L. , Bäckström, M. & Langlet, r. (2013). Bulk Metallic Glass Manufacturing Using Electron Beam Melting. In Proceedings from Additive Manufacturing & 3D Printing, Nottingham, UK, July 2013. Nottingham, UK :

Bäckström, M. , Tinnsten, M. , Koptyug, A. , Rännar, L. , Carlsson, P. , Danvind, J. & Wiklund, H. (2013). Sports Technology Education at Mid Sweden University. In 6TH ASIA-PACIFIC CONGRESS ON SPORTS TECHNOLOGY (APCST). (Procedia Engineering). pp. 214--219.    

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2013). Studies into the Mechanisms of the Cross-country Ski Vibrations and Possible Models of the Phenomenon. In 6TH ASIA-PACIFIC CONGRESS ON SPORTS TECHNOLOGY (APCST). (Procedia Engineering). pp. 40--45.  

Lund Ohlsson, M. , Danvind, J. & Holmberg, J. (2013). Can Simulations Assist in Classification Development?. In Equipment and Technology in Paralympic Sports.

Skoglund, P. , Lund Ohlsson, M. & Danvind, J. (2013). Lower Leg Prosthesis for Cross-Country Skiing Classical Technique. Paper presented at the International Paralympic Committee VISTA2013 Scientific Conference, Bonn, 2013, Equipment & Technology in Paralympic Sports  

Sundström, D. , Carlsson, P. & Tinnsten, M. (2013). On Optimization of Pacing Strategy in Road Cycling. In 6TH ASIA-PACIFIC CONGRESS ON SPORTS TECHNOLOGY (APCST). Melbourne : (Procedia Engineering). pp. 118--123.  

Cronskär, M. & Bäckström, M. (2013). Modeling of fractured clavicles and reconstruction plates using CAD, finite element analysis and real musculoskeletal forces input. In WIT Transactions on Biomedicine and Health. (WIT Transactions on Biomedicine and Health). pp. 235--243.  

Ainegren, M. , Carlsson, P. & Tinnsten, M. (2013). A portable roller ski rolling resistance measurement system. In The Impact of Technology on Sport V : Procedia Engineering.. pp. 79--83.    

Lund Ohlsson, M. , Stöggl, T. & Danvind, J. (2012). Asymmetry case study during skiing in the diagonal stride using a lower leg prosthesis. Paper presented at the 2nd International Congress on Science and Nordic Skiing, Vuokatti, Finland, May 28-31, 2012

Ainegren, M. , Rännar, L. , Carlsson, P. & Tinnsten, M. (2012). The multi functional roller ski. Paper presented at the ICSNS 2012, 2nd International Congress on Science and Nordic Skiing, May 28th - 31st, Vuokatti, Finland

Hirsch, J. , Rännar, L. & Gamstedt, K. (2012). Virtual planning of reconstructions, production of individualized implants and transfer of the plan to the operating room in CMF surgery. Paper presented at the 26th Congress of the International College for Maxillo-Facial Surgery (ICMFS, Canary Islands, Spain

Neubauer, B. , Sidén, J. , Gulliksson, M. , Olofsson, C. , Koptyug, A. , Nilsson, H. & Norgren, M. (2012). A new thermally activated battery cell-based forest fire detection and monitoring system. In WIT Transactions on Ecology and the Environment. Southampton : (Ecology and the Environment). pp. 113--124.  

Koptyug, A. , Rännar, L. , Backstrom, M. & Klingvall, R. (2012). Electron Beam Melting : Moving from Macro- to Micro- and Nanoscale. In Materials Science Forum. Switzerland : (Materials Science Forum). pp. 532--537.  

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2012). Laboratory Setup for the Cross Country Ski Vibrations Measurements: Methodology and First Results. Paper presented at the 2nd International Congress on Science and Nordic Skiing, May 28 - 31, 2012, Vuokatti, Finland

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2012). Cross-country Ski Vibrations : Loaded Vs Unloaded Skis. Paper presented at the 2nd International Congress on Science and Nordic Skiing, May 28 - 31, 2012, Vuokatti, Finland

Petrovic, V. , Jordá, O. , Martin, A. , Rännar, L. R. & Dejanovic, S. (2011). Knowledge assisted Rapid Manufacturing, KARMA Project. Paper presented at the European Forum on Rapid Prototyping and Manufacturing (AEPR’11), Paris, France

Bäckström, M. , Rännar, L. & Kuzmin, L. (2011). Influencing factors on time-loss after shooting in Biathlon. In Moderns systems for application in Biathlon. Omck : . pp. 154--159.

Sundström, D. , Carlsson, P. & Tinnsten, M. (2011). Optimizing pacing strategies on a hilly track in cross-country skiing. In Procedia Engineering. (Procedia engineering). pp. 10--16.    

Koptyug, A. & Kuzmin, L. (2011). Experimental field studies of the cross-country ski running surface interaction with snow. In Procedia Engineering. (Procedia Engineering). pp. 23--29.    

Ainegren, M. , Carlsson, P. & Tinnsten, M. (2011). Classical style constructed roller skis and grip functionality. In Procedia Engineering : The Impact of Technology on Sports IV. (Procedia Engineering). pp. 4--9.    

Stenmark, P. , Tinnsten, M. & Wiklund, H. (2011). Customer involvement in product development: experiences from Scandinavian outdoor companies. In Procedia Engineering.. pp. 583--543.    

Ek, R. , Hong, J. & Dejanovic, S. (2011). Blood coagulation on electron beam melted implant surfaces, implications for bone growth. In Proccedings of EBS 2011. Dublin :  

Swarén, M. , Danvind, J. & Holmberg, H. (2010). Acceleration of the head during alpine skiing. In Proceedings for the fifth international conference on Science and Skiing. Salzburg : . pp. 82-

Bäckström, M. , Dahlén, L. , Ebrahimzadeh, R. & Rännar, L. (2009). Taylor Made Titanium Insoles in Alpine Ski Boots. In Asia-Pasific Congress on Sports Technology.

Laaksonen, M. , Ainegren, M. & Lisspers, J. (2009). Effects of combined relaxation and shooting training on shooting performance in biathlon. In Effects of combined relaxation and shooting training on shooting performance in biathlon.

Carlsson, P. , Tinnsten, M. & Ainegren, M. (2009). Numeric Simulation of Cross Country Skiing.

Ainegren, M. , Carlsson, P. , Tinnsten, M. & Laaksonen, M. (2009). Work economy of amateur and elite cross-country skiers during treadmill roller skiing. In 4th Asia Pacific Congress on Sports Technology, APCST2009.

Tesch, P. , Ainegren, M. , Östberg, J. , Swarén, M. & Holmberg, H. (2008). Peak oxygen uptake using a training device for combined resistance and aerobic exercise in space and on earth. In 13th Annual Congress of the European College of Sports Science. Cologne : . pp. 523-

Cronskär, M. , Rännar, L. , Bäckström, M. & Koptioug, A. (2008). Application of electron beam melting to titanium hip stem Implants. Paper presented at the International Conference on Additive Technologies

Kuzmin, L. & Tinnsten, M. (2008). Hot Glide Wax Treatment and the Hardness of the Ski Running Surface. In ENGINEERING OF SPORT 7, VOL 2. Paris : . pp. 135--141.

Lund, M. & Holmberg, J. (2008). Which are the Antagonists to the Pectoralis MajorMuscle in 4th Gear, Free‐style Technique, Cross‐Country Skiing?. In Science and Nordic Skiing. Oxford : . pp. 110--118.

Ainegren, M. , Carlsson, P. & Tinnsten, M. (2008). Roller ski rolling resistance and its effects on elite athletes’ performance. In ENGINEERING OF SPORT 7, VOL 2.. pp. 393--400.

Bäckstöm, M. , Dahlen, L. & Tinnsten, M. (2008). Essential ski characteristics for cross-country skis performance. In ENGINEERING OF SPORT 7, VOL 2. Paris : . pp. 543--549.  

Kuzmin, L. & Tinnsten, M. (2008). Estimation of dirt attraction on running surfaces of cross-country skis. In IMPACT OF TECHNOLOGY ON SPORTS II. London, UK : . pp. 851--856.

Johansson, J. & Bäckström, M. (2007). Collaboration - a Key Factor for the Application of Discrete Event Simulation in Real World Manufacturing Industry.

Sidén, J. , Koptioug, A. , Gulliksson, M. & Nilsson, H. (2007). An Action Activated and Self Powered Wireless Forest Fire Detector. In IFIP International Federation for Information Processing. (International federation for information processing). pp. 47--58.  

Holmberg, J. (2007). Cross-country Skiing Biomechanics using the AnyBody Modeling System. In ANSYS Conference & 25th CADFEM Users´ Meeting 2007. Dresden :

Holmberg, L. J. & Holmberg, H. (2007). The role of triceps in double poling biomechanics, an introductory study. In Proceedings of the 4th International Congress on Science and Skiing (2007). St. Cristoph am Aarlberg, Austria..

Mamontov, E. & Koptioug, A. (2006). Nonsearch paradigm for large-scale parameter-identification problems in dynamical systems related to oncogenic hyperplasia. In Proceedings of the 22nd IFIP TC7 Conference held from July 18–22, 2005, in Turin, Italy.. pp. 269--278.  

Kuzmin, L. & Tinnsten, M. (2006). Contamination, wettability and the ski running surface gliding ability. In International congress on science and Nordic skiing, June 18.-20. 2006 Vuokatti, Finland : ICSNS 2006. Jyväskylä :

Sidén, J. , Nilsson, H. , Koptyug [Koptioug], A. & Olsson, T. (2006). A Distanced RFID Dipole for a Metallic Supply Chain Label. In 2006 IEEE Antennas and Propagation Society International Symposium, 9-14 July 2006 , Albuquerque, NM, USA.. pp. 3229--3232.

Ainegren, M. , Carlsson, P. & Tinnsten, M. (2006). Rolling resistance for treadmill roller skiing : Presented at International Congress on Science and Nordic Skiing 2006, June 18-20, 2006, Vuokatti, Finland.

Dahlen, L. & Carlsson, P. (2005). Numerical optimization of a distributor valve. In WIT Transaction on the Built Environment.. pp. 333--343.

Jonsson, P. , Nilsson, H. & Koptoiug, A. (2005). Genetically Engineered Dual band Antenna for RFID Applications.

Jonsson, P. , Nilsson, H. & Koptioug, A. (2005). Dual band Fraktal Antenna for RFID Applications.

Nilsson, H. , Sidén, J. , Unander, T. , Olsson, T. , Jonsson, P. , Koptioug, A. & Gulliksson, M. (2005). Characterization of moisture sensor based on printed Carbon-Zinc energy cell. In Polytronic 2005: 5th International Conference on Polymers and Adhesives in Microelectronics and Photonics - Proceedings. Piscataway, NJ : . pp. 82--85.  

Sidén, J. , Olsson, T. , Koptioug, A. & Nilsson, H. (2005). Reduced Amount of Conductive Ink with Gridded Printed Antennas. In Polytronic 2005: 5th International Conference on Polymers and Adhesives in Microelectronics and Photonics - Proceedings. Piscataway, NJ : . pp. 86--89.  

Esping, B. , Tinnsten, M. , Carlsson, P. & Johnsson, M. (2005). Optimization of violin tops with focus on determining correct material properties. In World Congress on Structural and Multidisciplinary Optimization, 6th. Proceedings (CD-ROM) : WCSMO6, May 30 - June 3, Rio de Janeiro, Brazil..

Tinnsten, M. & Carlsson, P. (2005). Optimization - A useful tool in the process of designing violin top plates?. In International Congress on Sound and Vibration ; 12 (Lisbon) : 2005.07.11-14. Programme and book of abstracts : ICSV ; 12 (Lisbon) : 2005.07.11-14. Lisbon : . pp. 3085--3092.

Carlsson, P. (2005). Promote IT 2005 : Proceedings of the fifth Conference for the Promotion of Research in IT at New Universities and University Colleges in Sweden - Borlänge, Sweden 11-13 May, 2005 / editied by Janis Bubenko jr. In Promote IT 2005 : Proceedings of the fifth Conference for the Promotion of Research in IT at New Universities and University Colleges in Sweden - Borlänge, Sweden 11-13 May, 2005 / editied by Janis Bubenko jr. Lund :

Israelsson, B. & Rännar, L. (2004). CAE and Rapid Prototyping Integrated in Product Marketing : A Novel Method for the Plastic Manufacturing Industry in the County of Jämtland. In Moldex3D European User’s Meeting, Billund, Denmark, September 2004..

Dahlen, L. , Carlsson, P. , Kuzmin, L. , Olsson, N. & Tinnsten, M. (2004). Adventure technology and sport science - A research project at Mid Sweden University : 5th international engineering of sport. 13-16 september, UC Davis, USA..

Sidén, J. , Koptioug, A. & Gulliksson, M. (2004). The "Smart" Diaper Moisture Detection System. In 2004 IEEE MITT-S International Microwave Symposium Digest, Jun 6-11 2004, Fort Worth, TX, United States.. pp. 659--662.  

Tinnsten, M. & Carlsson, P. (2004). Important spruce properties determined by the use of numerical optimization.. In International Symposium on Musical Acoustics, March 31st to April 3rd, 2004, in Nara/Japan: : Proceedings of ISMA 2004.

Carlsson, P. & Tinnsten, M. (2003). Determination of important wood properties for blanks for violin tops by the use of numerical optimization.. In Proceedings of the Stockholm Music Acoustics Conference, August 6-9, 2003 (SMAC 03), Stockholm, Sweden Edited by Roberto Bresin. Sth : (TRITA-TMH). pp. 428-

Carlsson, P. & Tinnsten, M. (2003). Numerical optimization of violin bows with varying densities of the wood material. In Proceedings of the Stockholm Music Acoustics Conference, August 6-9, 2003 (SMAC 03), Stockholm, Sweden. Stockholm : (TRITA-TMH). pp. 423-

Koptioug, A. & Hesselbom, H. (2003). Some Aspects of Modelling of Dense High Speed TL Interconnects for Printed Circuit Boards. In GigaHertz 2003 : Proceedings from the Seventh Symposium, November 4–5, 2003, Linköping, Sweden. Linköping : (Linköping Electronic Conference Proceedings)

Rännar, L. (2003). Efficient Cooling of FFF Injection Molding Tools with Conformal Cooling Channels, : An Introductory Analysis. In Advanced research in virtual and rapid prototyping : proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, 1 - 4 October, 2003. Leiria : . pp. 433--437.

Dahlén, L. & Olsson, H. (2003). A study of two lubricated contacts in a radial piston hydraulic motor. In The Eighth Scandinavian International Conference on Fluid Power, Proceedings of the conference, Vol 2. : SICFP'03, May 7-9, Tampere, Finland (2003). Tampere : . pp. 931--936.

Bäckström, M. & Wiklund, H. (2003). QFD as a Tool to Improve Quality Control in a Complex Manufacturing Environment. In Proceedings of The Sixth Quality Management and Organisational Development Conference (QMOD 2003) Paris, France 1-3 october 2003 - Paris.

Holmberg, J. & Wagenius, P. (2003). A biomechanical model of a double-poling skier. In International Society of Biomechanics XIXth Congress, 6-11 July 2003, Dunedin, New Zealand, CD ROM - Abstracs and Proceeding. Dunedin, N.Z :

Koptioug, A. , Jonsson, P. , Sidén, J. , Olsson, T. & Gulliksson, M. (2003). On the behavior of printed RFID tag antennas, using conductive paint. In Antenn 03. Nordic Antenna Symposium, 13-15 May 2003 , Kalmar, Sweden.. pp. 371--374.

Sidén, J. , Jonsson, P. & Koptioug, A. (2003). Printed RFID tag antennas with minimal performance degradation when bent. In Proceedings of Asia Pacific Microwave Conference 2003, APMC'03, Seoul, South Korea, November 4-7, 2003..

Olsson, T. , Jonsson, P. , Sidén, J. , Koptioug, A. & Gulliksson, M. (2003). Deformed Bow-tie antenna. In Antenn 03. Nordic Antenna Symposium, 13-15 May 2003 , Kalmar, Sweden.. pp. 183--188.

Carlsson, P. & Tinnsten, M. (2002). A combined laminate and honeycomb wood model for softwood used for numerical optimization of a violin top. In Forum Acusticum Sevilla 2002 : 3rd European congress on accoustics, XXXIII Spanish congress on accoustics, TECNIACUSTICA 2002, European and Japanese congress on acoustics, 3rd Iberian congress on acoustics. Sevilla, Spain 16-20 September 2002. Madrid Madrid : (Revista de Acústica)

Carlsson, P. & Tinnsten, M. (2002). Numerical optimization of geometrical dimensions and determination of material parameters for violin tops. In Forum Acusticum Sevilla 2002 : 3rd European congress on accoustics, XXXIII Spanish congress on accoustics, TECNIACUSTICA 2002, European and Japanese congress on acoustics, 3rd Iberian congress on acoustics. Sevilla, Spain 16-20 September 2002. Madrid : (Revista de Acústica)

Dahlén, L. & Olsson, H. (2002). Analysis of Two Sliding Contacts Inside a Radial Piston Hydraulic Motor. In Proceedings at 5th JFPS International Symposium on Fluid Power, Nov. 12-15, 2002, Nara, Japan.

Holmberg, J. & Rännar, L. (2001). VerOpt - MATLAB Driven Versatile Optimization. In Program and proceedings for the Nordic MATLAB Conference Oslo, October 17-18, 2001. Trondheim : . pp. 207--212.

Johansson, J. (2001). Modelling and simulation in the early stages of the development process of a manufacturing system. In Proceedings of 2001 International CIRP Design Seminar.. pp. 251--254.

Carlsson, P. & Tinnsten, M. (2001). Optimized wood drying of a mixture of representative boards. In Moisture control in environment-friendly housing and wood drying technology in new century : July 9-13, 2001 Tsukuba, Japan : 7th International IUFRO Wood Drying Conference proceedings. Ibaraki, Japan : . pp. 461-

Carlsson, P. & Tinnsten, M. (2001). Optimization of acoustic response with numerical and experimental comparison. In Proceedings of the Eighth International Congress on Sound and Vibration 2001 : 2-6 July 2001, the Hong Kong Polytechnic University, Hong Kong, China : ICSV8, Hong Kong 2001. Hong Kong : . pp. 2121--2128.

Carlsson, P. & Tinnsten, M. (2001). Stochastic optimization of violin tops. In International symposium on musical acoustics 2001. - Perugia, Italia, 10-14 September 2001 : ISMA 2001 ; (Perugia) : 2001. Venezia : . pp. 640-

Holmberg, J. (2001). Optimering av biomekaniska system. In SMD 01 - Svenska mekanikdagar Linköping 11-13 juni 2001 : Svenska mekanikdagar (2001 : Linköping). Stockholm : . pp. 195-

Bäckström, M. & Wiklund, H. (2000). On the application of quality function deployment in integrated supervisory process control. In IMechE conference transactions.. pp. 531--540.

Bäckström, M. & Wiklund, H. (2000). Integration of real-time quality control and process monitoring. In The 33rd CIRP International Seminar on Manufacturing Systems : the manufacturing systems in its human context : a tool to extend the global welfare : 5-7 June, 2000, Stockholm, Sweden : proceedings. : CIRP International Seminar on Manufacturing Systems (33 : 2000 : Stockholm). Sth. : . pp. 438-

Carlsson, P. & Arfvidsson, J. (1999). Optimized wood drying. In Wood Drying research and technology for sustainable forestry beyond 2000 : , 1999, Stellenbosch, South Africa. : 6th International IUFRO Conference on Wood Drying, 25-28 January, 1999. Matieland, South Africa : . pp. 310-

Tinnsten, M. & Jonsson, M. (1999). Acoustic optimization of plate vibration : a numerical example. In Vibration, Noise and Structural Dynamics '99 : proceedings of the International Conference on Vibration, Noise and Structural Dynamics, Ramada Hotel, Venice, 28 to 30 April 1999.. pp. 576-

Bäckström, M. & Wiklund, H. (1999). An approach to integrated process monitoring and quality control of advanced machining. In Life cycle approaches to production systems : management, control, and supervision; preprints; ASI '99; Advanced Summer Institute '99, ICIMS-NOE; September 22 - 24, 1999, Leuven, Belgium. Leuven, Belgien : . pp. 150-

Bäckström, M. & Wiklund, H. (1999). Deployment of quality and productivity requirements in integrated process control. In Proceedings of The 26th International Conference on Computers & Industrial Engineering, December 15-17, 1999, Melbourne, Australia.. pp. 70--74.

Cai, D. Q. , Xie, M. , Goh, T. N. , Wiklund, H. & Bäckström, M. (1999). A study of control chart for adjusted processes. In The 26th International Conference on Computers & Industrial Engineering (the 26th C & IE) : December 15-17, 1999, Melbourne, Australia.. pp. 443--447.

Bäckström, M. & Wiklund, H. (1998). A step towards integrated supervisory control of complex machining processes. In Changing the ways we work : shaping the ICT-solutions for the next century : proceedings of the Conference on Integration in Manufacturing, Göteborg, Sweden, 6-8 October 1998. Amsterdam : (Advances in design and manufacturing). pp. 817-

Carlsson, P. , Esping, B. & Dahlblom, O. (1996). Optimization of the wood-drying process.. In Quality Wood Drying Through Process Modelling and Novel Technologies, Quebec Canada, Aug. 13-17, 1996 : 5th International IUFRO Conference on Wood Drying, 25-28 January, 1999. Sainte-Foy, Québec : . pp. 559-

Doctoral theses

Klingvall Ek, R. (2019). Electron beam melting: Impact of part surface properties on metal fatigue and bone ingrowth. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2019 (Mid Sweden University doctoral thesis : 291)  

Sundström, D. (2016). Numerical optimization of pacing strategies in locomotive endurance sports. Dis. (Comprehensive summary) Östersund : Mid Sweden University, 2016 (Mid Sweden University doctoral thesis : 237)  

Cronskär, M. (2014). On customization of orthopedic implants - from design and additive manufacturing to implementation. Dis. (Comprehensive summary) Sundsvall, Sweden : Kopieringen, Mid Sweden University, 2014 (Mid Sweden University doctoral thesis : 191)  

Ainegren, M. (2012). Roller skis' rolling resistance and grip characteristics : influences on physiological and performance measures in cross-country skiers. Dis. (Comprehensive summary) Östersund : Mid Sweden University, 2012 (Mid Sweden University doctoral thesis : 125)  

Kuzmin, L. (2010). Interfacial kinetic ski friction. Dis. (Comprehensive summary) Östersund : Mittuniversitetet, 2010 (Mid Sweden University doctoral thesis : 88)  

Rännar, L. (2008). On Optimization of Injection Molding Cooling. Dis. (Comprehensive summary) Trondheim : , 2008 (Doctoral thesis at NTNU : 2008:113)

Dahlén, L. (2003). Numerical and experimental study of performance of a hydraulic motor. Dis. Luleå : Luleå tekniska universitet, 2003 (Doctoral thesis / Luleå University of Technology : 2003:26)

Carlsson, P. (2000). Optimized Wood Manufactoring with Main Focus on Wood Drying. Dis. (Comprehensive summary) Stockholm : Tekniska Högskolan, 2000 (Trita-BYMA : 2000:1)

Tinnsten, M. (1999). Numerical and experimental study of acoustic and structural optimization. Dis. Luleå : Luleå Tekniska Universitet, 1999 (Doctoral theses / Luleå University of Technology : 1999:04)

Bäckström, M. (1999). On Monitoring and Control of Machining Processes. Dis. Luleå : , 1999 (Doctoral Thesis : 1999:11)

Licentiate theses, comprehensive summaries

Klingvall Ek, R. (2016). SURFACE PROPERTIES OF IMPLANTS MANUFACTURED USING ELECTRON BEAM MELTING. Lic. (Comprehensive summary) Sweden : Mid Sweden University, 2016 (Mid Sweden University licentiate thesis : 122)  

Sundström, D. (2013). Optimized Pacing Strategies in Cross-Country Skiing and Time-Trial Road Cycling. Lic. (Comprehensive summary) Östersund : Mid Sweden University, 2013 (Mid Sweden University licentiate thesis : 95)  

Cronskär, M. (2011). The use of additive manufacturing in the custom design of orthopedic implants. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2011 (Mid Sweden University licentiate thesis : 63)  

Ainegren, M. (2010). The rolling resistances of roller skis and their effects on human performance during treadmill roller skiing. Lic. (Comprehensive summary) Sundsvall : Kopieringen Mid Sweden University, 2010 (Mid Sweden University licentiate thesis : 42)  

Kuzmin, L. (2006). Investigation of the most essential factors influencing ski glide. Lic. (Comprehensive summary) Luleå : Luleå University of Technology, 2006 (Luleå University of Technology licentiate thesis : )

Carlsson, P. (1997). Optimization of the Wood Drying Process. Lic. (Comprehensive summary) Stockholm : Tekniska Högskolan, 1997 (Trita-BYMA : 1997:5)

Licentiate theses, monographs

Johansson, J. (2002). Modelling and Simulation in the Early Stages of the Development Process of a Manufacturing System - A case study of the development process of a wood flooring industry . Lic. Luleå : University of Luleå, 2002 (Licentiate thesis / Luleå University of Technology : )

Tinnsten, M. (1996). Numerical and experimental study of dynamic and acoustic behaviour of vibrating structures. Lic. Luleå : Tekniska Högskolan i Luleå, 1996 (Licentiatuppsats / Tekniska Högskolan i Luleå : 1996:11L)

Bäckström, M. (1991). Performance of Adaptive Control : Significant Features. Lic. Linköping : Univ., 1991 (Linköping studies in science and technology. Thesis : 299)

Manuscripts

Jonsson, P. , Nilsson, H. & Koptioug, A. Using Fractals to Obtain Antennas with High Directivity.

Sidén, J. , Fein, M. , Koptioug, A. & Nilsson, H. On the Efficiency of Printed RFID Antennas : (skriven för IEEE Transactions on Electron Devices).

Tinnsten, M. , Carlsson, P. , Esping, B. & Jonsson, M. Important wood properties for blanks for violin tops determined by use of numerical optimization.

Cronskär, M. , Rännar, L. , Bäckström, M. , Nilsson, K. & Samuelsson, B. Patient-specific bone plates for clavicle fractures : Design, manufacturing and strength analysis.

Kuzmin, L. , Danvind, J. , Carlsson, P. & Tinnsten, M. Estimating surface hydrophobicity by introducing a wettability factor based on contact angles.

Bäckström, M. & Wiklund, H. Integration of real-time quality control and process monitoring.

Lund Ohlsson, M. , Danvind, J. & Holmberg, L. J. Descriptive comparison of three technique analysis methods in the context of cross-country sit-skiing: energy expenditure and gross efficiency, descriptive biomechanics and musculoskeletal simulations.

Patents

Bäckström, M. & Koptyug, A. (2016). Method and system for generating a driver support product for a racing driver .

Nilsson, H. , Sidén, J. & Koptyug, A. (2008). Sensoranordning med RFID-enheter .

Carle, F. & Koptioug, A. (2007). Portable rescue device and a method for locating such a device .

Nilsson, H. , Koptioug, A. , Gulliksson, M. , Sidén, J. , Olsson, T. & Jonsson, P. (2004). Moisture Sensor System .

Reports

Bäckström, M. & Wiklund, H. (1999). On the use of neural networks and statistical methods in the integrated supervisory process control concept.

Jonasson, J. & Esping, B. (1996). Skiktlaminerat trä : en studie. Mitthögskolan (Rapport / Mitthögskolan 1996:9).

Esping, B. , Tinnsten, M. & Jonsson, M. (1995). Optimization of acoustic response. Östersund : Mitthögskolan (Rapport / Mitthögskolan 1995:2).

Esping, B. & Grenestedt, J. L. (1995). Composites optimization using lamination parameters in an engineering environment. Östersund : Mitthögskolan (Rapport / Mitthögskolan 1995:15).

Esping, B. (1995). Homogeniserat trä : 2000-talets miljövänliga, höghållfasta konstruktionsmaterial. Östersund : Mitthögskolan (Rapport / Mitthögskolan 1995:3).

Esping, B. (1995). Optimization of the wood drying process. Östersund : Mitthögskolan (Rapport / Mitthögskolan 1995:1).

Tinnsten, M. (1994). Numerical prediction of acoustic pressure and intensity. Östersund : Mitthögskolan (Rapport / Mitthögskolan 1994:27).

Carlsson, P. (1994). Irreversibel termodynamik i trätorkningssammanhang. Östersund : Mitthögskolan (Rapport / Mitthögskolan 1994:28).

Esping, B. , Clarin, P. & Romell, O. (1994). Octopus : a tool for distributed optimization of multi-disciplinary objectives. (Rapport / Mitthögskolan 1994:2).

Janson, C. , Kim, K. , Larsson, L. , Holm, D. & Esping, B. (1994). Optimization of the series 60 hull from a resistance point of view. (Rapport / Mitthögskolan 1994:5).

Esping, B. (1994). Design optimization as an engineering tool. Mitthögskolan (Rapport / Mitthögskolan 1994:10).

Contact

The page was updated 10/25/2019