Publications FSCN

Save favourite 28 Aug August 2017

Publications FSCN

Articles in journals

Hu, J. , Shao, J. , Yang, H. , Lin, G. , Chen, Y. , Wang, X. , Zhang, W. & Chen, H. (2017). Co-gasification of coal and biomass : Synergy, characterization and reactivity of the residual char. Bioresource Technology, vol. 244, pp. 1-7.  

Kumar, V. , Forsberg, S. , Engström, A. , Nurmi, M. , Dahlström, C. & Toivakka, M. (2017). Conductive carbon-nanocellulose coatings on paper. TAPPI Journal, vol. 16: 6, pp. 310-311.

Kumar, V. , Forsberg, S. , Engström, A. , Nurmi, M. , Andres, B. , Dahlström, C. & Toivakka, M. (2017). Conductive nanographite-nanocellulose coatings on paper. FLEXIBLE AND PRINTED ELECTRONICS, vol. 2: 3  

Sandin, S. , Cheritat, A. , Bäckström, J. & Cornell, A. (2017). Deposition efficiency in the preparation of ozone-producing nickel and antimony doped tin oxide anodes. Journal of Electrochemical Science and Engineering, vol. 7: 1, pp. 51-64.    

Mridha, M. , Ma, G. , Palo-Nieto, C. , Afewerki, S. & Cordova, A. (2017). Development of an Amino Acid/Hydroxy Oxime Dual Catalyst System for Highly Stereoselective Direct Asymmetric Aldol Reactions in the Presence of Water. Synthesis (Stuttgart), vol. 49: 2, pp. 383-390.  

Ding, M. , Ma, L. , Zhang, Q. , Wang, C. , Zhang, W. & Wang, T. (2017). Enhancement of conversion from bio-syngas to higher alcohols fuels over K-promoted Cu-Fe bimodal pore catalysts. Fuel processing technology, vol. 159, pp. 436-441.  

Moilanen, C. , Björkqvist, T. , Ovaska, M. , Koivisto, J. , Miksic, A. , Engberg, B. A. , Salminen, L. I. , Saarenrinne, P. & et al. (2017). Influence of strain rate, temperature and fatigue on the radial compression behaviour of Norway spruce. Holzforschung, vol. 71: 6, pp. 505-514.  

Eivazihollagh, A. , Bäckström, J. , Norgren, M. & Edlund, H. (2017). Influences of the operational variables on electrochemical treatment of chelated Cu(II) in alkaline solutions using a membrane cell. Journal of chemical technology and biotechnology (1986), vol. 92: 6, pp. 1436-1445.  

Hedenstedt, K. , Bäckström, J. & Ahlberg, E. (2017). In-Situ Raman Spectroscopy of α- and γ-FeOOH during Cathodic Load. Journal of the Electrochemical Society, vol. 164: 9, pp. H621-H627.    

Sandberg, C. , Berg, J. & Engstrand, P. (2017). Low consistency refining of mechanical pulp - system design. TAPPI Journal, vol. 16: 7, pp. 419-429.

Nelsson, E. , Paulsson, M. , Sandberg, C. , Svensson-Rundlöf, E. & Engstrand, P. (2017). Low dosage sulfite pretreatment at different refining temperatures in mill scale TMP production. Nordic Pulp & Paper Research Journal, vol. 32: 1, pp. 59-69.  

Harvey, D. J. , Harvey, H. , Larsson, M. C. , Svensson, G. P. , Hedenström, E. , Finch, P. & Gange, A. C. (2017). Making the invisible visible : Determining an accurate national distribution of Elater ferrugineus in the United Kingdom using pheromones. Insect Conservation and Diversity, vol. 10: 4, pp. 1-11.  

Blomquist, N. , Wells, T. , Andres, B. , Bäckström, J. , Forsberg, S. & Olin, H. (2017). Metal-free supercapacitor with aqueous electrolyte and low-cost carbon materials. Scientific Reports, vol. 7    

Sandberg, C. , Berg, J. & Engstrand, P. (2017). Mill evaluation of an intensified mechanical pulping process. Nordic Pulp & Paper Research Journal, vol. 32: 2, pp. 204-210.  

Zhang, R. , Hummelgård, M. , Olsen, M. , Örtegren, J. & Olin, H. (2017). Nanogenerator made of ZnO nanosheet networks. Semiconductor Science and Technology, vol. 32: 5  

Eivazihollagh, A. , Bäckström, J. , Dahlström, C. , Carlsson, F. , Ibrahem, I. , Lindman, B. , Edlund, H. & Norgren, M. (2017). One-pot synthesis of cellulose-templated copper nanoparticles with antibacterial properties. Materials letters (General ed.), vol. 187, pp. 170-172.  

Ferritsius, O. , Ferritsius, R. , Hill, J. , Karlström, A. , Ferritsius, J. & Eriksson, K. (2017). Process considerations and its demands on TMP property measurements - A study on tensile index. Nordic Pulp & Paper Research Journal, vol. 32: 1, pp. 45-53.  

Eivazihollagh, A. , Tejera, J. , Svanedal, I. , Edlund, H. , Blanco, A. & Norgren, M. (2017). Removal of Cd2+, Zn2+, and Sr2+ by Ion Flotation, Using a Surface-Active Derivative of DTPA (C12-DTPA). Industrial & Engineering Chemistry Research,  

Samyn, P. , Barhoum, A. , Öhlund, T. & Dufresne, A. (2017). Review: Nanoparticles and Nanostructured Materials in Papermaking. Journal of Materials Science,  

Barhoum, A. , Samyn, P. , Öhlund, T. & Dufresne, A. (2017). Review of recent research on flexible multifunctional nanopapers. Nanoscale,  

Öhlund, T. , Hummelgård, M. & Olin, H. (2017). Sintering Inhibition of Silver Nanoparticle Films via AgCl Nanocrystal Formation. Nanomaterials, vol. 7: 8    

Pettersson, G. , Norgren, S. & Höglund, H. (2017). Strong paper from spruce CTMP - Part I. Nordic Pulp & Paper Research Journal, vol. 32: 1, pp. 54-58.  

Rahman, H. , Lindström, M. E. , Sandström, P. , Salmen, L. & Engstrand, P. (2017). The effect of increased pulp yield using additives in the softwood kraft cook on the physical properties of low-grammage handsheets. Nordic Pulp & Paper Research Journal, vol. 32: 3, pp. 317-323.

Lindman, B. , Medronho, B. , Alves, L. , Costa, C. , Edlund, H. & Norgren, M. (2017). The relevance of structural features of cellulose and its interactions to dissolution, regeneration, gelation and plasticization phenomena. Physical Chemistry, Chemical Physics - PCCP, vol. 19: 35, pp. 23704-23718.  

Mattsson, A. & Uesaka, T. (2017). Time-dependent breakdown of fiber networks : Uncertainty of lifetime. Physical review. E, vol. 95: 5  

Harvey, D. J. , Harvey, H. , Harvey, R. P. , Kadej, M. , Hedenström, E. , Gange, A. C. & Finch, P. (2017). Use of novel attraction compounds increases monitoring success of a rare beetle, Elater ferrugineus. Insect Conservation and Diversity, vol. 10: 2, pp. 161-170.  

Alimadadi, M. & Uesaka, T. (2016). 3D-oriented fiber networks made by foam forming. Cellulose (London), vol. 23: 1, pp. 661-671.    

Hellström, P. , Heijnesson-Hulten, A. , Paulsson, M. , Hakansson, H. & Germgard, U. (2016). A comparative study of enzymatic and Fenton pretreatment applied to a birch kraft pulp used for MFC production in a pilot scale high-pressure homogenizer. TAPPI Journal, vol. 15: 6, pp. 375-381.

Zauli, A. , Carpaneto, G. M. , Chiari, S. , Mancini, E. , Nyabuga, F. N. , De Zan, L. R. , Romiti, F. , Sabbani, S. & et al. (2016). Assessing the taxonomic status of Osmoderma cristinae (Coleoptera Scarabaeidae), endemic to Sicily, by genetic, morphological and pheromonal analyses. Journal of Zoological Systematics and Evolutionary Research, vol. 54: 3, pp. 206-214.  

Uesaka, T. (2016). Complex Matters : Things that matter. Nordic Pulp & Paper Research Journal, vol. 31: 2, pp. 213-218.

Edvardsson, S. , Karlsson, K. & Olin, H. (2016). corr3p_tr : A particle approach for the general three-body problem. Computer Physics Communications, vol. 200, pp. 259-273.  

Xu, C. , Afewerki, S. , Tai, C. , Cordova, A. & Hedin, N. (2016). Cyclopalladated Azo-linked Porous Polymers in C-C Bond Forming Reactions. CHEMISTRYSELECT, vol. 1: 18, pp. 5801-5804.  

Alves, L. , Medronho, B. , Antunes, F. E. , Topgaard, D. & Lindman, B. (2016). Dissolution state of cellulose in aqueous systems. 1. Alkaline solvents. Cellulose (London), vol. 23: 1, pp. 247-258.  

Alves, L. , Medronho, B. , Antunes, F. E. , Topgaard, D. & Lindman, B. (2016). Dissolution state of cellulose in aqueous systems. 2. Acidic solvents. Carbohydrate Polymers, vol. 151, pp. 707-715.  

Andres, B. , Engström, A. , Blomquist, N. , Forsberg, S. , Dahlström, C. & Olin, H. (2016). Electrode Mass Balancing as an Inexpensive and Simple Method to Increase the Capacitance of Electric Double-Layer Capacitors. PLoS ONE, vol. 11: 9, pp. 1-12.    

Forsberg, V. , Zhang, R. , Joakim, B. , Dahlström, C. , Andres, B. , Norgren, M. , Andersson, M. , Hummelgård, M. & et al. (2016). Exfoliated MoS2 in Water without Additives. PLoS ONE, vol. 11: 4    

Duan, R. , Westerlind, B. , Norgren, M. , Anugwom, I. , Virtanen, P. & Mikkola, J. (2016). Fibre stress-strain response of high temperature chemi-thermomechanical pulp treated with switchable ionic liquids. BioResources, vol. 11: 4, pp. 8570-8588.    

Piltonen, P. , Hildebrandt, N. C. , Westerlind, B. , Valkama, J. , Tervahartiala, T. & Illikainen, M. (2016). Green and efficient method for preparing all-cellulose composites with NaOH/urea solvent. Composites Science And Technology, vol. 135, pp. 153-158.  

Moilanen, C. S. , Björkqvist, T. , Engberg, B. A. , Salminen, L. I. & Saarenrinne, P. (2016). High strain rate radial compression of Norway spruce earlywood and latewood. Cellulose (London), vol. 23: 1, pp. 873-889.  

Zhang, Z. , Tian, N. , Zhang, W. , Huang, X. , Ruan, L. & Wu, L. (2016). Inhibition of carbon steel corrosion in phase-change-materials solution by methionine and proline. Corrosion Science, vol. 111, pp. 675-689.  

Palo-Nieto, C. , Afewerki, S. , Anderson, M. , Tai, C. , Berglund, P. & Cordova, A. (2016). Integrated Heterogeneous Metal/Enzymatic Multiple Relay Catalysis for Eco-Friendly and Asymmetric Synthesis. ACS Catalysis, vol. 6: 6, pp. 3932-3940.  

Blomquist, N. , Engström, A. , Hummelgård, M. , Andres, B. , Forsberg, S. & Olin, H. (2016). Large-Scale Production of Nanographite by Tube-Shear Exfoliation in Water. PLoS ONE, vol. 11: 4    

Forsberg, V. , Zhang, R. , Andersson, H. , Bäckström, J. , Dahlström, C. , Norgren, M. , Andres, B. & Olin, H. (2016). Liquid Exfoliation of Layered Materials in Water for Inkjet Printing. Journal of Imaging Science and Technology, vol. 60: 4, pp. 1-7.  

Gradin, P. , Berg, J. & Nyström, S. (2016). Measuring Tangential Forces in a Pulp Refiner : A Novel Approach. Experimental techniques (Westport, Conn.), vol. 40: 2, pp. 789-793.  

Svanedal, I. , Andersson, F. , Hedenström, E. , Norgren, M. , Edlund, H. , Satija, S. K. , Lindman, B. & Rennie, A. R. (2016). Molecular Organization of an Adsorbed Layer : A Zwitterionic, pH-Sensitive Surfactant at the Air/Water Interface. Langmuir, vol. 32: 42, pp. 10936-10945.  

Osong, S. H. , Dahlström, C. , Forsberg, S. , Andres, B. , Engstrand, P. , Norgren, S. & Engström, A. (2016). Nanofibrillated cellulose/nanographite composite films. Cellulose (London), vol. 23: 4, pp. 2487-2500.  

Mitko, L. , Weber, M. G. , Ramirez, S. R. , Hedenström, E. , Wcislo, W. T. & Eltz, T. (2016). Olfactory specialization for perfume collection in male orchid bees. Journal of Experimental Biology, vol. 219: 10, pp. 1467-1475.    

Marais, A. , Enarsson, L. , Pettersson, G. , Lindström, T. & Wågberg, L. (2016). Pilot-scale papermaking using Layer-by-Layer treated fibres; Comparison between the effects of beating and of sequential addition of polymeric additives. Nordic Pulp & Paper Research Journal, vol. 31: 2, pp. 308-314.

Karlström, A. , Hill, J. , Ferritsius, R. & Ferritsius, O. (2016). Pulp property development Part II : Process non-linearities and their influence on pulp property development. Nordic Pulp & Paper Research Journal, vol. 31: 2, pp. 287-299.

Karlström, A. , Hill, J. , Ferritsius, O. & Ferritsius, R. (2016). Pulp property development Part III : Fiber residence time and consistency profile impact on specific energy and pulp properties. Nordic Pulp & Paper Research Journal, vol. 31: 2, pp. 300-307.

Osong, S. H. , Norgren, S. , Engstrand, P. , Lundberg, M. , Reza, M. & Tapani, V. (2016). Qualitative evaluation of microfibrillated cellulose usingthe crill method and some aspects of microscopy. Cellulose (London), vol. 23: 6, pp. 3611-3624.    

Hedenström, E. , Fagerlund-Edfeldt, A. , Edman, M. & Jonsson, B. (2016). Resveratrol, piceatannol, and isorhapontigenin from Norway spruce (Picea abies) debarking wastewater as inhibitors on the growth of nine species of wood-decaying fungi. Wood Science and Technology, vol. 50: 3, pp. 617-629.  

Volpati, D. , Mårtensson, N. , Anttu, N. , Viklund, P. , Sundvall, C. , Åberg, I. , Bäckström, J. , Olin, H. & et al. (2016). Spectroscopic investigations of arrays containing vertically and horizontally aligned silicon nanowires. Materials Research Express, vol. 3: 12  

Yang, J. , Duan, J. , Zhang, L. , Lindman, B. , Edlund, H. & Norgren, M. (2016). Spherical nanocomposite particles prepared from mixed cellulose–chitosan solutions. Cellulose (London), vol. 23: 5, pp. 3105-3115.    

Reyier Österling, S. , Ferritsius, O. , Ferritsius, R. , Johansson, C. & Stångmyr, J. (2016). Weighted averages and distributions of fibre characteristics of mechanical pulps – Part II: Distributions of measured and predicted fibre characteristics by using raw data from an optical fibre analyser. Appita journal, vol. 69: 1, pp. 64-73.

Göransson, K. , Söderlind, U. , Engstrand, P. & Zhang, W. (2015). An experimental study on catalytic bed materials in a biomass dual fluidised bed gasifier. Renewable energy, vol. 81, pp. 251-261.  

Öhlund, T. , Schuppert, A. , Andres, B. , Andersson, H. , Forsberg, S. , Schmidt, W. , Nilsson, H. , Andersson, M. & et al. (2015). Assisted sintering of silver nanoparticle inkjet inks on paper with active coatings. RSC Advances, vol. 5, pp. 64841-64849.      

Cordova, A. (2015). Combined heterogeneous metal/organic catalysts for eco-friendly synthesis. Pure and Applied Chemistry, vol. 87: 9-10, pp. 1011-1019.  

Zhang, W. , He, J. , Engstrand, P. & Björkqvist, O. (2015). Economic evaluation on bio-synthetic natural gas production integrated in a thermomechanical pulp mill. Energies, vol. 8: 11, pp. 12795-12809.    

Lindman, B. , Medronho, B. & Theliander, H. (2015). Editorial : Cellulose dissolution and regeneration: systems and interactions. Nordic Pulp & Paper Research Journal, vol. 30: 1, pp. 2-3.  

Sandberg, C. & Berg, J. (2015). Effect of flow recirculation on pulp quality and energy efficiency in low consistency refining of mechanical pulp. Nordic Pulp & Paper Research Journal, vol. 30: 2, pp. 230-233.  

Afewerki, S. , Ma, G. , Ibrahem, I. , Liu, L. , Sun, J. & Cordova, A. (2015). Highly Enantioselective Control of Dynamic Cascade Transformations by Dual Catalysis : Asymmetric Synthesis of Polysubstituted Spirocyclic Oxindoles. ACS Catalysis, vol. 5: 2, pp. 1266-1272.  

Moilanen, C. S. , Saarenrinne, P. , Engberg, B. A. & Björkqvist, T. (2015). Image-based stress and strain measurement of wood in the split-Hopkinson pressure bar. Measurement science and technology, vol. 26: 8  

Öhlund, T. , Schuppert, A. , Hummelgård, M. , Bäckström, J. , Nilsson, H. & Olin, H. (2015). Inkjet Fabrication of Copper Patterns for Flexible Electronics : Using Paper with Active Precoatings. ACS Applied Materials and Interfaces, vol. 7: 33, pp. 18273-18282.  

Göransson, K. , Söderlind, U. , Henschel, T. , Engstrand, P. & Zhang, W. (2015). Internal tar/CHreforming in a biomass dual fluidised bed gasifier.. Biomass Conversion and Biorefinery, vol. 5, pp. 355-366.  

Nelsson, E. , Sandberg, C. , Svensson-Rundlöf, E. , Engstrand, P. , Fernando, D. & Daniel, G. (2015). Low dosage sulfite pretreatment in a modern TMP-line. Nordic Pulp & Paper Research Journal, vol. 30: 4, pp. 591-598.    

Berg, J. , Sandberg, C. , Engberg, B. A. & Engstrand, P. (2015). Low-consistency refining of mechanical pulp in the light of forces on fibres. Nordic Pulp & Paper Research Journal, vol. 30: 2, pp. 225-229.    

Medronho, B. , Duarte, H. , Alves, L. , Antunes, F. , Romano, A. & Lindman, B. (2015). Probing cellulose amphiphilicity. Nordic Pulp & Paper Research Journal, vol. 30: 1, pp. 58-66.  

Karlström, A. , Hill, J. , Ferritsius, R. & Ferritsius, O. (2015). Pulp property development Part I: Interlacing under-sampled pulp properties and TMP process data using piece-wise linear functions. Nordic Pulp & Paper Research Journal, vol. 30: 4, pp. 599-608.    

Cuomo, F. , Lopez, F. , Piludu, M. , Miguel, M. G. , Lindman, B. & Ceglie, A. (2015). Release of small hydrophilic molecules from polyelectrolyte capsules : Effect of the wall thickness. Journal of Colloid and Interface Science, vol. 447, pp. 211-216.  

Kohls, H. , Anderson, M. , Dickerhoff, J. , Weisz, K. , Cordova, A. , Berglund, P. , Brundiek, H. , Bornscheuer, U. T. & et al. (2015). Selective Access to All Four Diastereomers of a 1,3-Amino Alcohol by Combination of a Keto Reductase- and an Amine Transaminase-Catalysed Reaction. Advanced Synthesis and Catalysis, vol. 357: 8, pp. 1808-1814.  

Kadej, M. , Zając, K. , Ruta, R. , Gutowski, J. M. , Tarnawski, D. , Smolis, A. , Olbrycht, T. , Malkiewicz, A. & et al. (2015). Sex pheromones as a tool to overcome the Wallacean shortfall in conservation biology: a case of Elater ferrugineus Linnaeus, 1758 (Coleoptera: Elateridae). Journal of Insect Conservation, vol. 19: 1, pp. 25-32.    

Edvardsson, S. , Neuman, M. , Edström, P. & Olin, H. (2015). Solving equations through particle dynamics. Computer Physics Communications, vol. 197, pp. 169-181.  

Rahmani, R. , Hedenström, E. & Schroeder, M. (2015). SPME collection and GC-MS analysis of volatiles emitted during the attack of male Polygraphus poligraphus (Coleoptera, Curcolionidae) on Norway spruce. Zeitschrift für Naturforschung C - A Journal of Biosciences, vol. 70: 9-10, pp. 265-273.  

Hedenström, E. , Wallin, E. , Andersson, J. , Bång, J. , Wang, H. , Löfstedt, C. , Brattström, O. & Baquet, P. (2015). Stereoisomeric Analysis of 6,10,14-Trimethylpentadecan-2-ol and the Corresponding Ketone in Wing Extracts from African Bicyclus Butterfly Species. Journal of Chemical Ecology, vol. 41: 1, pp. 44-51.  

Pettersson, G. , Höglund, H. , Norgren, S. , Sjöberg, J. , Peng, F. , Hallgren, H. , Moberg, A. , Ljungqvist, C. & et al. (2015). Strong and bulky paperboard sheets from surface modified CTMP, manufactured at low energy. Nordic Pulp & Paper Research Journal, vol. 30: 2, pp. 318-324.  

Lindman, B. & Medronho, B. (2015). The Subtleties of Dissolution and Regeneration of Cellulose : Breaking and Making Hydrogen Bonds. BioResources, vol. 10: 3, pp. 3811-3814.    

Xu, C. , Deiana, L. , Afewerki, S. , Incerti-Pradillos, C. , Cordova, O. , Guo, P. , Cordova, A. & Hedin, N. (2015). The Use of Porous Palladium(II)-polyimine in Cooperatively-catalyzed Highly Enantioselective Cascade Transformations. Advanced Synthesis and Catalysis, vol. 357: 9, pp. 2150-2156.  

Zhang, R. , Alecrim, V. , Hummelgård, M. , Andres, B. , Forsberg, S. , Andersson, M. & Olin, H. (2015). Thermally reduced kaolin-graphene oxide nanocomposites for gas sensing. Scientific Reports, vol. 5, pp. Art. no. 7676    

Mattsson, A. & Uesaka, T. (2015). Time-dependent statistical failure of fiber networks. Physical Review E. Statistical, Nonlinear, and Soft Matter Physics, vol. 92: 4    

Alves, L. , Medronho, B. , Antunes, F. E. , Fernández-García, M. P. , Ventura, J. , Araújo, J. P. , Romano, A. & Lindman, B. (2015). Unusual extraction and characterization of nanocrystalline cellulose from cellulose derivatives. Journal of Molecular Liquids, vol. 210, pp. 106-112.  

Reyier Österling, S. , Ferritsius, O. , Ferritsius, R. & Stångmyr, J. (2015). Weighted averages and distributions of fibre characteristics of mechanical pulps Part I : Various methods of weighting data from an optical analyser can give averages that rank pulps differently. Appita journal, vol. 68: 4, pp. 357-368.

Zhang, R. , Hummelgård, M. & Olin, H. (2014). A facile one-step method for synthesising a parallelogram-shaped single-crystalline ZnO nanosheet. Materials Science and Engineering: B, vol. 184, pp. 1-6.  

Hellström, L. M. , Biller, S. , Edvardsson, S. & Gradin, P. A. (2014). A theoretical and experimental study of the circular sawing process. Holzforschung, vol. 68: 3, pp. 307-312.  

Jiang, L. , Dziedzic, P. , Spacil, Z. , Zhao, G. , Nilsson, L. , Ilag, L. L. & Cordova, A. (2014). Abiotic synthesis of amino acids and self-crystallization under prebiotic conditions. Scientific Reports, vol. 4, pp. Art. no. 6769    

Walter, K. , Paulsson, M. & Engstrand, P. (2014). Acid Hydrogen Peroxide Treatment of Norway Spruce TMP : The Effect of an Extended pH Range when Catalyzed by Free Ferrous and Free or EDG/EDTA-Chelated Ferric Ions. Journal of wood chemistry and technology, vol. 34: 2, pp. 135-155.  

Duan, R. , Ibrahem, I. , Edlund, H. & Norgren, M. (2014). Acid-Catalyzed Synthesis of Foamed Materials from Renewable Sources. Industrial & Engineering Chemistry Research, vol. 53: 45, pp. 17597-17603.  

Zasadowski, D. , Yang, J. , Edlund, H. & Norgren, M. (2014). Antisolvent precipitation of water-soluble hemicelluloses from TMP process water. Carbohydrate Polymers, vol. 113, pp. 411-419.  

Andersson, H. , Manuilskiy, A. , Haller, S. , Hummelgård, M. , Sidén, J. , Hummelgård, C. , Olin, H. & Nilsson, H. (2014). Assembling surface mounted components on ink-jet printed double sided paper circuit board. Nanotechnology, vol. 25, pp. Art. no. 094002  

Andersson, H. , Manuilskiy, A. , Sidén, J. , Gao, J. , Hummelgård, M. , Kunninmel, G. & Nilsson, H. (2014). Chemically programmed ink-jet printed resistive WORM memory array and readout circuit. Materials Research Express, vol. 1: 3, pp. 035021  

Deiana, L. , Jiang, Y. , Palo-Nieto, C. , Afewerki, S. , Incerti-Pradillos, C. A. , Verho, O. , Tai, C. , Johnston, E. V. & et al. (2014). Combined Heterogeneous Metal/Chiral Amine : Multiple Relay Catalysis for Versatile Eco-Friendly Synthesis. Angewandte Chemie International Edition, vol. 53: 13, pp. 3447-3451.  

Norgren, S. & Hoglund, H. (2014). Consolidation of fibre-fibre bonds in TMP and CTMP based papers. Paper Technology, vol. 55: 3, pp. 6-10.

Osong, S. H. , Norgren, S. , Engstrand, P. , Lundberg, M. & Hansen, P. (2014). Crill : A novel technique to characterize nano-ligno-cellulose. Nordic Pulp & Paper Research Journal, vol. 29: 2, pp. 190-194.  

Boija, S. , Almesåker, A. , Hedenström, E. , Bylund, D. , Edlund, H. & Norgren, M. (2014). Determination of conditional stability constants for some divalent transition metal ion-EDTA complexes by electrospray ionization mass spectrometry. Journal of Mass Spectrometry, vol. 49: 7, pp. 550-556.  

Fagerlund-Edfeldt, A. , Hedenström, E. , Edman, M. & Jonsson, B. G. (2014). Effect of Debarking Water from Norway Spruce (Picea abies) on the Growth of Five Species of Wood-Decaying Fungi. Zeitschrift für Naturforschung C - A Journal of Biosciences, vol. 9-10: 69c, pp. 418-424.  

Deiana, L. , Ghisu, L. , Córdova, O. , Afewerki, S. , Zhang, R. & Córdova, A. (2014). Efficient and highly enantioselective aerobic oxidation-michael- carbocyclization cascade transformations by integrated Pd(0)-CPG nanoparticle/chiral amine relay catalysis. Synthesis (Stuttgart), vol. 46: 10, pp. 1303-1310.  

Deiana, L. , Ghisu, L. , Afewerki, S. , Verho, O. , Johnston, E. V. , Hedin, N. , Bacsik, Z. & Cordova, A. (2014). Enantioselective Heterogeneous Synergistic Catalysis for Asymmetric Cascade Transformations. Advanced Synthesis and Catalysis, vol. 356: 11-12, pp. 2485-2492.  

Andres, B. , Forsberg, S. , Dahlström, C. , Blomquist, N. & Olin, H. (2014). Enhanced electrical and mechanical properties of nanographite electrodes for supercapacitors by addition of nanofibrillated cellulose. Physica status solidi. B, Basic research, vol. 251: 12, pp. 2581-2586.  

Hellström, P. , Heijnesson-Hultén, A. , Paulsson, M. , Håkansson, H. & Germgård, U. (2014). Fenton pre-treated microfibrillated cellulose evaluated as a strength enhancer in the middle ply of paperboard. Nordic Pulp & Paper Research Journal, vol. 29: 4, pp. 732-740.  

Svanedal, I. , Boija, S. , Norgren, M. & Edlund, H. (2014). Headgroup interactions and ion flotation efficiency in mixtures of a chelating surfactant, different foaming agents and divalent metal ions. Langmuir, vol. 30: 22, pp. 6331-6338.  

Andersson, K. , Bergman, K. -. , Andersson, F. , Hedenström, E. , Jansson, N. , Burman, J. , Winde, I. , Larsson, M. C. & et al. (2014). High-accuracy sampling of saproxylic diversity indicators at regional scales with pheromones : The case of Elater ferrugineus (Coleoptera, Elateridae). Biological Conservation, vol. 171, pp. 156-166.  

Afewerki, S. , Guangning, M. , Ibrahem, I. & Cordova, A. (2014). Highly enantioselective organo/metal cooperative catalysis for construction of spirocyclopentaneoxindoles. Abstract of Papers of the American Chemical Society, vol. 248

Svensson, G. P. , Gündüz, E. A. , Sjöberg, N. , Hedenström, E. , Lassance, J. -. , Wang, H. -. , Löfstedt, C. & Anderbrant, O. (2014). Identification, Synthesis, and Behavioral Activity of 5,11-Dimethylpentacosane, A Novel Sex Pheromone Component of the Greater Wax Moth, Galleria Mellonella (L.). Journal of Chemical Ecology, vol. 40: 4, pp. 387-395.  

Svanedal, I. , Persson, G. , Norgren, M. & Edlund, H. (2014). Interactions in Mixed Micellar Systems of an Amphoteric Chelating Surfactant and Ionic Surfactants. Langmuir, vol. 30: 5, pp. 1250-1256.  

Andersson, H. , Manuilskiy, A. , Gao, J. , Lidenmark, C. , Sidén, J. , Forsberg, S. , Unander, T. & Nilsson, H. (2014). Investigation of Humidity Sensor Effect in Silver Nanoparticle Ink Sensors Printed on Paper. IEEE Sensors Journal, vol. 14: 3, pp. Art. no. 6615915  

Santoro, S. , Deiana, L. , Zhao, G. -. , Lin, S. , Himo, F. & Córdova, A. (2014). Mechanism of palladium/amine cocatalyzed carbocyclization of aldehydes with alkynes and its merging with "Pd oxidase catalysis". ACS Catalysis, vol. 4: 12, pp. 4474-4484.    

Svanedal, I. , Boija, S. , Almesåker, A. , Persson, G. , Andersson, F. , Hedenström, E. , Bylund, D. , Norgren, M. & et al. (2014). Metal Ion Coordination, Conditional Stability Constants and Solution Behavior of Chelating Surfactant Metal Complexes. Langmuir, vol. 30: 16, pp. 4605-4612.  

Osong, S. H. , Norgren, S. & Engstrand, P. (2014). Paper strength improvement by inclusion of nano-ligno-cellulose to Chemi-thermomechanical pulp. Nordic Pulp & Paper Research Journal, vol. 29: 2, pp. 309-316.  

Zhang, R. , Andersson, H. , Olsen, M. , Hummelgård, M. , Edvardsson, S. , Nilsson, H. & Olin, H. (2014). Piezoelectric gated ZnO nanowire diode studied by in situ TEM probing. Nano Energy, vol. 3, pp. 10-15.  

Jiang, X. , Song, X. , Chen, Y. & Zhang, W. (2014). Research on biogas production potential of aquatic plants. Renewable energy, vol. 69, pp. 97-102.  

Zasadowski, D. , Strand, A. , Sundberg, A. , Edlund, H. & Norgren, M. (2014). Selective purification of bleached spruce TMP process water by induced air flotation (IAF). Holzforschung, vol. 68: 2, pp. 157-165.  

Enberg, S. , Rundlöf, M. , Paulsson, M. , Axelsson, P. , Eriksen, O. & Engstrand, P. (2014). Some causes of formation of colour during storage of hydrogen-peroxide bleached Norway spruce mechanical pulp. Nordic Pulp & Paper Research Journal, vol. 29: 2, pp. 356-366.  

Karlsson, A. , Paulsson, M. , Engstrand, P. & Hedenström, E. (2014). Strategies to reduce heat-induced darkening for enhanced bleachability of mechanical pulps. Appita journal, vol. 67: 1, pp. 50-57.

Hellström, P. , Heijnesson-Hultén, A. , Paulsson, M. , Håkansson, H. & Germgård, U. (2014). The effect of Fenton chemistry on the properties of microfibrillated cellulose. Cellulose (London), vol. 21: 3, pp. 1489-1503.  

Enberg, S. , Rundlöf, M. , Paulsson, M. , Axelsson, P. , Eriksen, O. & Engstrand, P. (2014). The influence of process waters on optical properties during storage of hydrogen-peroxide bleached Norway spruce mechanical pulp. Nordic Pulp & Paper Research Journal, vol. 29: 2, pp. 344-355.    

Anderson, M. , Afewerki, S. , Berglund, P. & Cordova, A. (2014). Total Synthesis of Capsaicin Analogues from Lignin-Derived Compounds by Combined Heterogeneous Metal, Organocatalytic and Enzymatic Cascades in One Pot. Advanced Synthesis and Catalysis, vol. 356: 9, pp. 2113-2118.  

Zauli, A. , Chiari, S. , Hedenström, E. , Svensson, G. P. & Carpaneto, G. M. (2014). Using odour traps for population monitoring and dispersal analysis of the threatened saproxylic beetles Osmoderma eremita and Elater ferrugineus in central Italy. Journal of Insect Conservation, vol. 18: 5, pp. 801-813.  

Wallin, E. , De Facci, M. , Anderbrant, O. & Hedenström, E. (2014). (Z)-3-Dodecenoic Acid Is the Main Component of Full-Body n-Hexane Extracts from Two Acacia Gall-Inducing Thrips (Thysanoptera) and May Function as an Alarm Pheromone. Zeitschrift für Naturforschung C - A Journal of Biosciences, vol. 69C: 7-8, pp. 335-345.  

Isaksson, P. , Gradin, P. A. & Hellström, L. M. (2013). A numerical and experimental study regarding the influence of some process parameters on the damage state in wood chips. Holzforschung, vol. 67: 6, pp. 691-696.  

Ma, G. , Afewerki, S. , Deiana, L. , Palo-Nieto, C. , Liu, L. , Sun, J. , Ibrahem, I. & Córdova, A. (2013). A palladium/chiral amine co-catalyzed enantioselective dynamic cascade reaction : Synthesis of polysubstituted carbocycles with a quaternary carbon stereocenter. Angewandte Chemie International Edition, vol. 52: 23, pp. 6050-6054.  

Lusth, H. , Gradin, P. A. & Hellström, L. M. (2013). A theoretical model for the prediction of energy consumption during the chipper canter process. Nordic Pulp & Paper Research Journal, vol. 28: 2, pp. 211-215.  

Walter, K. , Paulsson, M. & Hellström, P. (2013). Acid hydrogen peroxide treatment of Norway Spruce TMP : A model study using free ferrous ions and ferric ions chelated with EDTA as catalysts. Journal of wood chemistry and technology, vol. 33: 4, pp. 267-285.  

Pokorny, T. , Hannibal, M. , Quezada-Euan, J. J. G. , Hedenström, E. , Sjöberg, N. , Bång, J. & Eltz, T. (2013). Acquisition of species-specific perfume blends : Influence of habitat-dependent compound availability on odour choices of male orchid bees (Euglossa spp.). Oecologia, vol. 172: 2, pp. 417-425.  

Osong, S. H. , Norgren, S. & Engstrand, P. (2013). An approach to produce nano-ligno-cellulose from mechanical pulp fine materials. Nordic Pulp & Paper Research Journal, vol. 28: 4, pp. 472-479.      

Svanedal, I. , Persson, G. , Norgren, M. & Edlund, H. (2013). Anomalies in Solution Behavior of an Alkyl Aminopolycarboxylic Chelating Surfactant. Langmuir, vol. 29: 45, pp. 13708-13716.  

Deiana, L. , Cordova, A. , Nieto, C. P. , Jiang, Y. , Johnston, E. & Verho, O. (2013). Combined multistep heterogeneous transition metal catalysis and aminocatalysis for asymmetric cascade reactions. Abstract of Papers of the American Chemical Society, vol. 245, pp. Meeting abstract 147-ORGN

Ragauskas, A. J. , Paulsson, M. & Goyal, G. (2013). Editorial perspective on bleaching : Today and tomorrow. TAPPI Journal, vol. 12: 10, pp. 5-6.

Wiklund, H. S. & Uesaka, T. (2013). Microfluidics of imbibition in random porous media. Physical Review E. Statistical, Nonlinear, and Soft Matter Physics, vol. 87: 2, pp. 023006    

Fjellström, H. , Engstrand, P. & Htun, M. (2013). On the relationship between wood fibre wall swelling, charged groups, and delamination during refining. Journal of Science & Technology for Forest Products and Processes, vol. 3: 4, pp. 30-34.

Fjellström, H. , Engstrand, P. & Htun, M. (2013). ON THE RELATIONSHIP BETWEEN WOOD FIBRE WALL SWELLING, CHARGED GROUPS, AND DELAMINATION DURING REFINING. J-FOR-JOURNAL OF SCIENCE & TECHNOLOGY FOR FOREST PRODUCTS AND PROCESSES, vol. 3: 4, pp. 30-34.  

Ibrahem, I. , Ma, G. , Afewerki, S. & Córdova, A. (2013). Palladium/Chiral Amine Co-catalyzed Enantioselective beta-Arylation of alpha,beta-Unsaturated Aldehydes. Angewandte Chemie International Edition, vol. 52: 3, pp. 878-882.  

Hummelgård, C. , Bäckström, J. , Olin, H. , Karlsson, R. , Cornell, A. , Habibur Rahman, S. & Eriksson, S. (2013). Physical and electrochemical properties of cobalt doped (ti,ru)O2 electrode coatings. Materials Science & Engineering, vol. 178: 20, pp. 1515-1522.    

Zhang, R. , Andersson, H. , Andersson, M. , Andres, B. , Edlund, H. , Edström, P. , Edvardsson, S. , Forsberg, S. & et al. (2013). Soap-film coating : High-speed deposition of multilayer nanofilms. Scientific Reports, vol. 3, pp. Art. no. 1477    

Hummelgård, C. , Olin, H. , Gustafsson, J. , Cornell, A. & Bäckström, J. (2013). Spin coated titanium-ruthenium oxide thin films. Thin Solid Films, vol. 536, pp. 74-80.  

He, J. , Engstrand, P. , Björkqvist, O. & Zhang, W. (2013). Techno-economic evaluation of a mechanical pulp mill with gasification. Nordic Pulp & Paper Research Journal, vol. 28: 3, pp. 349-357.  

Lidenmark, C. , Pettersson, T. , Karlsson, O. J. , Notley, S. M. , Edlund, H. & Norgren, M. (2013). The adhesive behavior of extracted Latex polymers towards Silicon oxide and Cellulose. International Journal of Adhesion and Adhesives, vol. 44, pp. 250-258.  

Andersson, H. , Manuilskiy, A. , Lidenmark, C. , Gao, J. , Öhlund, T. , Forsberg, S. , Örtegren, J. , Schmidt, W. & et al. (2013). The influence of paper coating content on room temperature sintering of silver nanoparticle ink. Nanotechnology, vol. 24: 45, pp. Art. no. 455203  

Enberg, S. , Rundlöf, M. , Paulsson, M. , Johnsen, I. A. & Axelsson, P. (2013). The influence of process conditions during pulp storage on the optical properties of Norway spruce mechanical pulps. Nordic Pulp & Paper Research Journal, vol. 28: 2, pp. 203-210.  

Näslund, L. , Sánchez-Sánchez, C. M. , Ingason, Á. S. , Bäckström, J. , Herrero, E. , Rosen, J. & Holmin, S. (2013). The Role of TiO2 Doping on RuO2-Coated Electrodes for the Water Oxidation Reaction. The Journal of Physical Chemistry C, vol. 117: 12, pp. 6126-6135.  

Musa, N. , Andersson, K. , Burman, J. , Andersson, F. , Hedenström, E. , Jansson, N. , Paltto, H. , Westerberg, L. & et al. (2013). Using Sex Pheromone and a Multi-Scale Approach to Predict the Distribution of a Rare Saproxylic Beetle. PLoS ONE, vol. 8: 6, pp. e66149    

Edvardsson, S. , Gradin, P. , Isaksson, P. & Gulliksson, M. (2012). A Note on Wet Paper Web Adhesion Strength. Journal of Testing and Evaluation, vol. 40: 4, pp. 682-686.  

Ma, G. , Lin, S. , Ibrahem, I. , Kubik, G. , Liu, L. , Sun, J. & Cordova, A. (2012). Achiral Co-Catalyst Induced Switches in Catalytic Asymmetric Reactions on Racemic Mixtures (RRM) : From Stereodivergent RRM to Stereoconvergent Deracemization by Combination of Hydrogen Bond Donating and Chiral Amine Catalysts. Advanced Synthesis and Catalysis, vol. 354: 14-15, pp. 2865-2872.  

Högberg, I. , Zasadowski, D. , Karlsson, A. , Wikman, B. , Andersson, F. , Hedenström, E. , Edlund, H. & Norgren, M. (2012). Brightness development of a hydrogen peroxide bleached spruce TMP. Comparisons of pre-treatments with DTPA and a separable chelating surfactant. Nordic Pulp & Paper Research Journal, vol. 27: 1, pp. 50-55.    

Zhang, R. & Olin, H. (2012). Carbon nanomaterials as drug carriers : Real time drug release investigation. Materials science & engineering. C, biomimetic materials, sensors and systems, vol. 32: 5, pp. 1247-1252.  

Svensson, G. P. , Liedtke, C. , Hedenström, E. , Breistein, P. , Bång, J. & Larsson, M. C. (2012). Chemical ecology and insect conservation : optimising pheromone-based monitoring of the threatened saproxylic click beetle Elater ferrugineus. Journal of Insect Conservation, vol. 16: 4, pp. 549-555.  

Andersson, S. , Sandberg, C. & Engstrand, P. (2012). Comparison of mechanical pulps from two stage HC single disc and HC double disc - LC refining. Appita journal, vol. 65: 1, pp. 57-62.

Shuangzheng, L. , Tseggai, A. & Córdova, A. (2012). Concise catalytic asymmetric total synthesis of biologically active tropane alkaloids. Advanced Synthesis and Catalysis, vol. 354: 7, pp. 1363-1372.  

Shuangzheng, L. , Deiana, L. , Tseggai, A. & Córdova, A. (2012). Concise Total Synthesis of Dihydrocorynanthenol, Protoemetinol, Protoemetine, 3-epi-Protoemetinol and Emetine. European Journal of Organic Chemistry, : 2, pp. 398-408.  

Andersson, H. , Andres, B. , Manuilskiy, A. , Forsberg, S. , Hummelgård, M. , Bäckström, J. , Zhang, R. & Olin, H. (2012). Contacting paper-based supercapacitors to printed electronics on paper substrates. Nordic Pulp & Paper Research Journal, vol. 27: 2, pp. 476-480.    

Nieberding, C. M. , Fischer, K. , Saastamoinen, M. , Allen, C. E. , Wallin, E. A. , Hedenström, E. & Brakefield, P. M. (2012). Cracking the olfactory code of a butterfly : the scent of ageing.. Ecology Letters, vol. 15: 5, pp. 415-424.  

Karlsson, A. , Enberg, S. , Rundlöf, M. , Paulsson, M. & Edström, P. (2012). Determining optical properties of mechanical pulps : Sheetmaking procedure and investigation of different ways to evaluate light absorption. Nordic Pulp & Paper Research Journal, vol. 27: 3, pp. 531-541.    

Ferritsius, R. , Reyier Österling, S. & Ferritsius, O. (2012). Development of TMP fibers in LC- and HC-refining. Nordic Pulp & Paper Research Journal, vol. 27: 5, pp. 860-871.  

Deiana, L. , Zhao, G. , Leijonmarck, H. , Sun, J. , Lehmann, C. W. & Cordova, A. (2012). Direct Catalytic Asymmetric Synthesis of Pyrazolidine Dervates. ChemistryOpen, vol. 1: 3, pp. 134-139.    

Afewerki, S. , Ibrahem, I. , Rydfjord, J. , Breistein, P. & Córdova, A. (2012). Direct Regiospecific and Highly Enantioselective Intermolecular α-Allylic Alkylation of Aldehydes By Combination of Transition Metal and amine Catalysts. Chemistry - A European Journal, vol. 18: 10, pp. 2972-2977.  

Kulachenko, A. & Uesaka, T. (2012). Direct simulations of fiber network deformation and failure. Mechanics of materials (Print), vol. 51, pp. 1-14.  

Wiklund, H. & Uesaka, T. (2012). Edge-wicking : Micro-fluidics of two-dimensional liquid penetrationinto porous structures. Nordic Pulp & Paper Research Journal, vol. 27: 2, pp. 403-408.    

Andersson, S. , Sandberg, C. & Engstrand, P. (2012). Effect of long fibre concentration on low consistency refining of mechanical pulp. Nordic Pulp & Paper Research Journal, vol. 27: 4, pp. 702-706.    

M, Y. , Ibrahem, I. , Hasegawa, M. , Schrock, R. & Hoveyda, H. (2012). Enol Ethers as Substrates for Efficient Z- and Enantioselective Ring-Opening/Cross-Metathesis Reactions Promoted by Stereogenic-at-Mo Complexes; Utility in Chemical Synthesis and Mechanistic Attributes. Journal of the American Chemical Society, vol. 134: 5, pp. 2788-2799.  

Andersson, H. , Lidenmark, C. , Öhlund, T. , Örtegren, J. , Manuilskiy, A. , Forsberg, S. & Nilsson, H. (2012). Evaluation of coatings applied to flexible substrates to enhance quality of ink jet printed silver nano-particle structures. IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part C, vol. 2: 2, pp. 342-348.  

Hellström, L. , Carlberg, T. , Engstrand, P. , Gradin, P. & Gregersen, Ø. (2012). Evaluation Of Collimated Chipping Technology For Reducing Energy Consumption In Mechanical Pulping. Journal of Science & Technology for Forest Products and Processes, vol. 2: 3, pp. 6-9.

Co, M. , Fagerlund, A. , Engman, L. , Sunnerheim, K. , Sjöberg, P. J. & Turner, C. (2012). Extraction of Antioxidants from Spruce (Picea abies) Bark using Eco-friendly Solvents. Phytochemical Analysis, vol. 23: 1, pp. 1-11.  

Deiana, L. , Afewerki, S. , Palo-Nieto, C. , Verho, O. , Johnston, E. V. & Córdova, A. (2012). Highly Enantioselective Cascade Transformations by Merging Heterogeneous Transition Metal Catalysis with Asymmetric Aminocatalysis. Scientific reports, vol. 2, pp. Art. no. 851    

Andersson, H. , Manuilskiy, A. , Unander, T. , Lidenmark, C. , Forsberg, S. & Nilsson, H. (2012). Inkjet printed silver nanoparticle humidity sensor with memory effect on paper. IEEE Sensors Journal, vol. 12: 6, pp. 1901-1905.  

Gustafsson, J. , Hummelgård, C. , Bäckström, J. , Odnevall Wallinder, I. , Habibur Rahman, S. M. , Lindbergh, G. , Eriksson, S. & Cornell, A. (2012). In-situ activated hydrogen evolution by molybdate addition to neutral and alkaline electrolytes. Journal of electrochemical science and engineering, vol. 2: 3, pp. 105-120.    

Norgren, M. , Andersson, K. & Eriksson, M. (2012). Lignin Removal by Adsorption to Fly Ash in Wastewater Generated by Mechanical Pulping. Industrial & Engineering Chemistry Research, vol. 51: 8, pp. 3444-3451.  

Dahlström, C. & Uesaka, T. (2012). Microstructure Variations in Paper Coating : Direct Observations. Industrial & Engineering Chemistry Research, vol. 51: 24, pp. 8246-8252.  

Andersson, H. , Hammarling, K. , Sidén, J. , Manuilskiy, A. , Öhlund, T. & Nilsson, H. (2012). Modified EAS Tag Used as a Resistive Sensor Platform. MDPI Electronics, vol. 1: 2, pp. 32-46.    

Gustafsson, J. , Li, G. , Hummelgård, C. , Bäckström, J. & Cornell, A. (2012). On the suppression of cathodic hypochlorite reduction by electrolyte additions of molybdate and chromate ions. Journal of electrochemical science and engineering, vol. 2: 4, pp. 185-198.    

Ibrahem, I. , Breistein, P. & Córdova, A. (2012). One-pot three-component highly selective synthesis of homoallylboronates by using metal-free catalysis. Chemistry - A European Journal, vol. 18: 17, pp. 5175-5179.  

Hafrén, J. , Nelsson, E. , Gerritsen, H. C. & Bader, A. N. (2012). Optical properties of thermomechanical pulp (TMP) obtained from sulfite-pretreated Norway spruce with focus on two-photon spectral imaging (TPSI). Holzforschung, vol. 66: 7, pp. 817-824.  

Öhlund, T. , Örtegren, J. , Forsberg, S. & Nilsson, H. (2012). Paper Surfaces for Metal Nanoparticle Inkjet Printing. Applied Surface Science, vol. 259, pp. 731-739.  

Nelsson, E. , Sandberg, C. , Hildén, L. & Daniel, G. (2012). Pressurised compressive chip pre-treatment of Norway spruce with a mill scale Impressafiner. Nordic Pulp & Paper Research Journal, vol. 27: 1, pp. 056-062.  

Gorski, D. , Johansson, L. & Engstrand, P. (2012). Refiner bleaching in a peroxide-based ATMP process compared with conventional bleaching. Holzforschung, vol. 66: 3, pp. 275-281.  

Zasadowski, D. , Hedenström, E. , Edlund, H. & Norgren, M. (2012). Removal of lipophilic extractives and manganese ions from spruce TMP waters in a customized flotation cell. BioResources, vol. 7: 2, pp. 2376-2392.  

Salmi, A. , Salminen, L. I. , Engberg, B. A. , Bjorkqvist, T. & Haeggstrom, E. (2012). Repetitive impact loading causes local plastic deformation in wood. Journal of Applied Physics, vol. 111: 2, pp. Art. no. 024901  

Strand, A. , Zasadowski, D. , Norgren, M. , Hedenström, E. , Willför, S. & Sundberg, A. (2012). Selective froth flotation of pitch components from spruce TMP process water. Appita journal, vol. 65: 4, pp. 337-346.  

Hagström, Å. , Liénard, M. , Groot, A. , Hedenström, E. & Löfstedt, C. (2012). Semi-selective fatty acyl reductases from four heliothine moths influence the specific pheromone composition. PLoS ONE, vol. 7: 5, pp. Art. no. e37230    

Zhang, R. , Hummelgård, M. & Olin, H. (2012). Simple Fabrication of Gold Nanobelts and Patterns. PLoS ONE, vol. 7: 1, pp. Art. no. e30469    

He, J. , Göransson, K. , Söderlind, U. & Zhang, W. (2012). Simulation of biomass gasification in a dual fluidized bed gasifier. Biomass Conversion and Biorefinery, vol. 2: 1, pp. 1-10.    

Wiklund, H. & Uesaka, T. (2012). Simulations of shearing of capillary bridges. Journal of Chemical Physics, vol. 136: 9, pp. Art. no. 094703  

Zhang, R. , Hummelgård, M. & Olin, H. (2012). Size and concentration controlled growth of porous gold nanofilm. Physica status solidi. A, Applied research, vol. 209: 3, pp. 519-523.  

Bång, J. , Hedenström, E. & Anderbrant, O. (2012). Stereoisomeric separation of derivatized 2-alkanols using gas chromatography – mass spectrometry: Sex pheromone precursors found in pine sawfly species. Analytical Letters, vol. 45: 9, pp. 1016-1027.  

Andres, B. , Forsberg, S. , Vilches, A. P. , Zhang, R. , Andersson, H. , Hummelgård, M. , Bäckström, J. & Olin, H. (2012). Supercapacitors with graphene coated paper electrodes. Nordic Pulp & Paper Research Journal, vol. 27: 2, pp. 481-485.    

Fernando, D. , Muhic, D. , Engstrand, P. & Daniel, G. (2012). Surface and internal micro/ultrastructure of TMP fibres produced during high-intensity refining elucidate the development of pulp and paper properties. Holzforschung, vol. 66: 4, pp. 467-475.  

Olsen, M. , Hummelgård, M. & Olin, H. (2012). Surface modifications by field induced diffusion. PLoS ONE, vol. 7: 1, pp. Art. no. e30106    

Lusth, H. , Gradin, P. A. & Hellström, L. M. (2012). The dependency of energy consumption on cutting angles in the canter chipping process. Nordic Pulp & Paper Research Journal, vol. 27: 5, pp. 886-889.    

Andersson, S. , Sandberg, C. & Engstrand, P. (2012). The effect of rotor position on pulp properties in a two-zoned low consistency refiner. Nordic Pulp & Paper Research Journal, vol. 27: 3, pp. 525-530.    

Reyier Österling, S. , Ferritsius, O. & Ferritsius, R. (2012). The influence of fiber dimensions on mechanical pulp long fiber tensile index and density. Nordic Pulp & Paper Research Journal, vol. 27: 5, pp. 844-859.    

Uesaka, T. & Juntunen, J. (2012). Time-dependent, stochastic failure of paper and box. Nordic Pulp & Paper Research Journal, vol. 27: 2, pp. 370-374.      

Björkqvist, T. , Engberg, B. A. , Salminen, L. I. & Salmi, A. (2012). Towards optimal defibration : Energy reduction by fatiguing pre-treatment. Nordic Pulp & Paper Research Journal, vol. 27: 2, pp. 168-172.      

Zasadowski, D. , Hedenström, E. , Edlund, H. & Norgren, M. (2012). Use of a Voith flotation cell for removal of lipophilic extractives and Mn ions from spruce thermomechanical pulping process waters. BioResources, vol. 7: 3, pp. 2784-2126.  

Hellström, L. , Gradin, P. , Gulliksson, M. & Carlberg, T. (2011). A laboratory wood chipper for chipping under realistic conditions. Experimental mechanics, vol. 51: 8, pp. 1309-1316.  

Gradin, P. , Isaksson, P. & Gulliksson, M. (2011). A Note on the Co-linearity of forces and Displacements in an Elastic Structure. Journal of Applied Fluid Mechanics, vol. 78: 6, pp. Art. no. 4003912  

Liedtke, H. C. , Åbjörnsson, K. , Harraca, V. , Knudsen, J. , Wallin, E. , Hedenström, E. & Ryne, C. (2011). Alarm pheromones and chemical communication in nymphs of the tropical bed bug Cimex hemipterus (Hemiptera: Cimicidae). PLoS ONE, vol. 6: 3, pp. e18156    

Cordova, A. , Cihalova, S. , Dziedzic, P. & Vesely, J. (2011). Asymmetric Aza-Morita-Baylis-Hillman-type reactions: The highly enantioselective reaction between unmodified α,β-unsaturated aldehydes and N-acyl imines by organo-co-catalysis. Advanced Synthesis and Catalysis, vol. 353: 7, pp. 1096-1108.  

Wiklund, H. , Lindström, S. B. & Uesaka, T. (2011). Boundary condition considerations in lattice Boltzmann formulations of wetting binary fluids. Computer Physics Communications, vol. 182: 10, pp. 2192-2200.  

Deiana, L. , Dziedzic, P. , Zhao, G. , Vesely, J. , Ibrahem, I. , Rios, R. , Sun, J. & Cordova, A. (2011). Catalytic Asymmetric Aziridination of alpha,beta-Unsaturated Aldehydes. Chemistry - A European Journal, vol. 17: 28, pp. 7904-7917.  

Afewerki, S. , Breistein, P. , Pirttilä, K. , Deiana, L. , Dziedzic, P. , Ibrahem, I. & Córdova, A. (2011). Catalytic Enantioselective beta-Alkylation of alpha,beta-Unsaturated Aldehydes by Combination of Transition-Metal- and Aminocatalysis: Total Synthesis of Bisabolane Sesquiterpenes. Chemistry - A European Journal, vol. 17: 32, pp. 8784-8788.  

Lin, S. , Deiana, L. , Zhao, G. , Sun, J. & Cordova, A. (2011). Dynamic One-Pot Three-Component Catalytic Asymmetric Transformation by Combination of Hydrogen-Bond-Donating and Amine Catalysts. Angewandte Chemie International Edition, vol. 50: 33, pp. 7624-7630.  

Hummelgård, M. , Zhang, R. , Nilsson, H. & Olin, H. (2011). Electrical Sintering of Silver Nanoparticle Ink Studied by In-Situ TEM Probing. PLoS ONE, vol. 6: 2, pp. Art. no. e17209    

Ibrahem, I. , Santoro, S. , Himo, F. & Cordova, A. (2011). Enantioselective Conjugate Silyl Additions to alpha,beta-Unsaturated Aldehydes Catalyzed by Combination of Transition Metal and Chiral Amine Catalysts. Advanced Synthesis and Catalysis, vol. 353: 2-3, pp. 245-252.  

Muhic, D. , Huhtanen, J. , Sundström, L. , Sandberg, C. , Ullmar, M. , Engstrand, P. & Vuorio, P. (2011). Energy efficiency in double disc refining. Influence of intensity by segment design. Nordic Pulp & Paper Research Journal, vol. 26: 3, pp. 224-231.    

Göransson, K. , Söderlind, U. & Zhang, W. (2011). Experimental test on a novel dual fluidised bed biomass gasifier for synthetic fuel production. Fuel, vol. 90: 4, pp. 1340-1349.  

Fernando, D. , Muhic, D. , Engstrand, P. & Daniel, G. (2011). Fundamental understanding of pulp property development under different thermomechanical pulp refining conditions as observed by a new Simons' staining method and SEM observation of the ultrastructure of fibre surfaces. Holzforschung, vol. 65: 6, pp. 777-786.  

Ma, G. , Bartoszewicz, A. , Ibrahem, I. & Córdova, A. (2011). Highly Enantioselective Co-Catalytic Direct Aldol reactions by Combination of Hydrogen-Bond Donating and Acyclic Amino Acid Catalysts. Advanced Synthesis and Catalysis, vol. 353: 17, pp. 3114-3122.  

Dahlström, C. , Allem, R. & Uesaka, T. (2011). New Method for Characterizing Paper Coating Structures Using Argon Ion Beam Milling and Field Emission Scanning Electron Microscopy. Journal of Microscopy, vol. 241: 2, pp. 179-187.  

Edvardsson, S. , Gradin, P. & Isaksson, P. (2011). On dissipative effects of paper web adhesion strength. International Journal of Solids and Structures, vol. 48: 1, pp. 24-30.  

Ibrahem, I. , Breistein, P. & Córdova, A. (2011). One-Pot Three-Component Catalytic Enantioselective Synthesis of Homoallylboronates. Angewandte Chemie International Edition, vol. 50: 50, pp. 12036-12041.  

Gorski, D. , Mörseburg, K. , Axelsson, P. & Engstrand, P. (2011). Peroxide-based ATMP refining of spruce : energy efficiency, fibre properties and pulp quality. Nordic Pulp & Paper Research Journal, vol. 26: 1, pp. 47-63.    

Hellström, L. , Gradin, P. , Engstrand, P. & Gregersen, Ø. (2011). Properties of wood chips for thermomechanical pulp (TMP) production as a function of spout angle. Holzforschung, vol. 65: 6, pp. 805-809.  

Bång, J. , Hedenström, E. & Sjödin, K. (2011). Purification, Stereoisomeric Analysis and Quantification of Sex Pheromone Precursors in Female Whole Body Extracts from Pine Sawfly Species. Journal of Chemical Ecology, vol. 37: 1, pp. 125-133.  

Zhang, R. , Hummelgård, M. , Lv, G. & Olin, H. (2011). Real time monitoring of the drug release of rhodamine B on graphene oxide. Carbon, vol. 49: 4, pp. 1126-1132.  

Andersson, K. I. , Eriksson, M. & Norgren, M. (2011). Removal of Lignin from Wastewater Generated by Mechanical Pulping Using Activated Charcoal and Fly Ash: Adsorption Isotherms and Thermodynamics. Industrial & Engineering Chemistry Research, vol. 50: 13, pp. 7722-7732.  

Andersson, K. I. , Eriksson, M. & Norgren, M. (2011). Removal of Lignin from Wastewater Generated by Mechanical Pulping Using Activated Charcoal and Fly Ash : Adsorption Kinetics. Industrial & Engineering Chemistry Research, vol. 50: 13, pp. 7733-7739.  

Holmvall, M. , Lindström, S. & Uesaka, T. (2011). Simulation of two-phase flow with moving immersed boundaries. International Journal for Numerical Methods in Fluids, vol. 67: 12, pp. 2062-2080.  

He, J. & Zhang, W. (2011). Techno-economic evaluation of thermo-chemical biomass-to-ethanol. Applied Energy, vol. 88: 4, pp. 1224-1232.  

Holmvall, M. , Uesaka, T. , Drolet, F. & Lindström, S. (2011). Transfer of a microfluid to a stochastic fibre network. Journal of Fluids and Structures, vol. 27: 7, pp. 937-946.  

Eltz, T. , Hedenström, E. , Bång, J. , Wallin, E. A. & Andersson, J. (2010). (6R,10R)-6,10,14-Trimethylpentadecan-2-one, a Dominant and Behaviorally Active Component in Male Orchid Bee Fragrances. Journal of Chemical Ecology, vol. 36: 12, pp. 1322-1326.  

Isaksson, P. , Gradin, P. & Östlund, S. (2010). A simplified treatise of the Scott bond testing method. Experimental mechanics, vol. 50: 6, pp. 745-751.  

Logenius, L. , Agnemo, R. & Höglund, H. (2010). A study of the formation and elimination of chromophores in wood under mechanical pulping conditions using spectroscopy. Paperi ja puu - Paper and timber, vol. 92: 5, pp. 35-39.

Lassance, J. , Groot, A. T. , Liénard, M. A. , Antony, B. , Borgwardt, C. , Andersson, F. , Hedenström, E. , Heckel, D. G. & et al. (2010). Allelic variation in a fatty-acyl reductase gene causes divergence in moth sex pheromones. Nature, vol. 466: 7305, pp. 486-489.  

Zhao, G. , Lin, S. , Korotvicka, A. , Deiana, L. , Kullberg, M. & Cordova, A. (2010). Asymmetric Synthesis of Maraviroc (UK-427,857). Advanced Synthesis and Catalysis, vol. 352: 13, pp. 2291-2298.  

Zhang, W. (2010). Automotive fuels from biomass via gasification. Fuel processing technology, vol. 91: 8, pp. 866-876.  

Zhang, R. , Hummelgård, M. & Olin, H. (2010). Carbon nanocages grown by gold templating. Carbon, vol. 48: 2, pp. 424-430.  

Lidenmark, C. , Forsberg, S. , Norgren, M. , Edlund, H. & Karlsson, O. (2010). Changes with aging in the surface hydrophobicity of coated paper. TAPPI Journal, vol. 9: 5, pp. 40-46.

Nozière, B. , Dziedzic, P. & Córdova, A. (2010). Common Inorganic Ions Catalyze Chemical Reactions of Organic Compounds in Atmospheric Aerosols. Physical Chemistry, Chemical Physics - PCCP, vol. 12, pp. 3864

Lin, S. , Zhao, G. , Deiana, L. , Sun, J. , Zhang, Q. , Leijonmarck, H. & Còrdova, A. (2010). Dynamic kinetic asymmetric domino oxa-michael/carbocyclization by combination of transition-metal and amine catalysis: Catalytic enantioselective synthesis of dihydrofurans. Chemistry - A European Journal, vol. 16: 47, pp. 13930-13934.  

Zhao, G. , Ullah, F. , Deiana, L. , Lin, S. , Zhang, Q. , Sun, J. , Ibrahem, I. , Dziedzic, P. & et al. (2010). Dynamic kinetic asymmetric transformation (DYKAT) by combined amine and transition metal catalyzed enantioselective cycloisomerization. Chemistry - A European Journal,

Walter, K. , Paulsson, M. & Wackerberg, E. (2010). Energy efficient refining of Black spruce TMP by using acid hydrogen peroxide : Part 3. Chemical and morphological characterisation. Journal of Pulp and Paper Science (JPPS), vol. 36: 1-2, pp. 2-9.

Anderbrant, O. , Löfqvist, J. , Hedenström, E. , Bång, J. , Tai, A. & Högberg, H. (2010). Field Response of Male Pine Sawflies, Neodiprion sertifer (Diprionidae), to Sex Pheromone Analogs in Japan and Sweden. Journal of Chemical Ecology, vol. 36: 9, pp. 969-977.  

Björkqvist, O. , Engstrand, P. , Htun, M. & Norgren, M. (2010). FORE – Ett nytt industrikombinat baserat på mekaniska massaprocesser. Svensk papperstidning, Nordisk cellulosa, : 2, pp. 24-25.  

Zhao, G. , Hafrén, J. , Deiana, L. & Córdova, A. (2010). Heterogeneous “Organoclick” Derivatization of Polysaccharides : Photochemical Thiol-Ene Click Modification of Solid Cellulose. Macromolecular rapid communications, vol. 31: 8, pp. 740-744.  

Muhic, D. , Sundström, L. , Sandberg, C. , Ullmar, M. & Engstrand, P. (2010). Influence of temperature on energy efficiency in double disc chip refining. Nordic Pulp & Paper Research Journal, vol. 25: 4, pp. 420-427.  

Halvarsson, S. , Edlund, H. & Norgren, M. (2010). Manufacture of High-Performance Rice-Straw Fiberboards. Industrial & Engineering Chemistry Research, vol. 49: 3, pp. 1428-1435.  

Gorski, D. , Engstrand, P. , Hill, J. , Axelsson, P. & Johansson, L. (2010). Mg(OH)(2)-based hydrogen peroxide refiner bleaching: influence of extractives content in dilution water on pulp properties and energy efficiency. Appita journal, vol. 63: 3, pp. 218-225.

Zhang, R. , Hummelgård, M. , Dvorsek, D. , Mihailovic, D. & Olin, H. (2010). Mo6S3I6-Au composites: Synthesis, Conductance, and Applications. Journal of Colloid and Interface Science, vol. 348: 2, pp. 299-302.  

Malmgren, C. , Eriksson, A. K. , Cornell, A. , Bäckström, J. , Eriksson, S. & Olin, H. (2010). Nanocrystallinity in RuO2 coatings - influence of precursor and preparation temperature. Thin Solid Films, vol. 518: 14, pp. 3615-3618.  

Hummelgård, M. , Zhang, R. , Carlberg, T. , Vengust, D. , Dvorsek, D. , Mihailovic, D. & Olin, H. (2010). Nanowire Transformation and Annealing by Joule Heating. Nanotechnology, vol. 21: 16, pp. 165704-165704.  

Olsen, M. , Gradin, P. , Lindefelt, U. & Olin, H. (2010). Nonharmonic oscillations of nanosized cantilevers due to quantum-size effects. Physical Review B Condensed Matter, vol. 81: 5, pp. 054304      

Rios, R. , Schyman, P. , Sundén, H. , Zhao, G. , Ullah, F. , Chen, L. , Laaksonen, A. & Còrdova, A. (2010). Nonlinear effects in asymmetric amino acid catalysis by multiple interconnected stereoselective catalytic networks. Chemistry - A European Journal, vol. 16: 47, pp. 13935-13940.  

Deiana, L. , Zhao, G. , Dziedzic, P. , Rios, R. , Vesely, J. , Ekström, J. & Córdova, A. (2010). One-pot highly enantioselective catalytic Mannich-type reactions between aldehydes and stable a-amido sulfones: Asymmetric synthesis of b-amino aldehydes and b-amino acids. Tetrahedron Letters, vol. 51: 2, pp. 234-237.  

Zhu, M. , Shuangzheng, L. , Zhao, G. , Sun, J. & Córdova, A. (2010). Organocatalytic diasteroselective dibromination of alkenes. Tetrahedron Letters, vol. 51, pp. 2708-2712.  

Deiana, L. , Zhao, G. , Lin, S. , Dziedzic, P. , Zhang, Q. , Leijonmarck, H. & Còrdova, A. (2010). Organocatalytic enantioselective aziridination of α-substituted α,β-unsaturated aldehydes: Asymmetric synthesis of terminal aziridines. Advanced Synthesis and Catalysis, vol. 352: 18, pp. 3201-3207.  

Björkqvist, O. , Idefeldt, J. & Larsson, A. (2010). Risk Assessment of New Pricing Strategies in the District Heating Market : A Case Study at Sundsvall Energi AB. Energy Policy, vol. 38: 5, pp. 2171-2178.  

Zhang, R. , Hummelgård, M. & Olin, H. (2010). Simple Synthesis of Clay-Gold Nanocomposites with Tunable Color. Langmuir, vol. 26: 8, pp. 5823-5828.  

Zhang, R. , Hummelgård, M. & Olin, H. (2010). Single layer porous gold films grown at different temperatures. Physica. B, Condensed matter, vol. 405: 21, pp. 4517-4522.  

Edvardsson, S. & Uesaka, T. (2010). System dynamics of the open draw with web adhesion: Particle approach. Journal of applied mechanics, vol. 77: 2, pp. 1-11.  

Halvarsson, S. , Edlund, H. & Norgren, M. (2010). Wheat straw as raw material for manufacture of medium density fiberboard (MDF). BioResources, vol. 5: 2, pp. 1215-1231.  

Lindström, S. & Uesaka, T. (2009). A numerical investigation of the rheology of sheared fiber suspensions. Physics of fluids, vol. 21: 8, pp. 083301  

Hellström, L. M. , Isaksson, P. , Gradin, P. A. & Eriksson, K. (2009). An Analytical and Numerical Study of some aspects of the Wood Chipping Process. Nordic Pulp & Paper Research Journal, vol. 24: 2, pp. 225-230.    

Bäckström, M. , Hammar, L. & Htun, M. (2009). Beatability and runnability studies of ion-exchanged unbleached kraft pulps on a pilot scale. Nordic Pulp & Paper Research Journal, vol. 24: 1, pp. 94-100.    

Sabbani, S. & Hedenström, E. (2009). Control of water activity in lipase catalysed esterification of chiral  alkanoic acids. Journal of Molecular Catalysis B, vol. 58: 1-4, pp. 6-9.  

Sabbani, S. , La Pensée, L. , Bacsa, J. , Hedenström, E. & O´Neill, P. M. (2009). Diastereoselective Schenck Ene Reaction of Singlet Oxygen with Chiral AllylicAlcohols; Access to Enantiomerically Pure 1,2,4-Trioxanes. Tetrahedron, vol. 65: 41, pp. 8531-8537.  

Walter, K. , Paulsson, M. & Wackerberg, E. (2009). Energy efficient refining of Black spruce TMP by using acid hydrogen peroxide : Part 1. A pilot plant study. Nordic Pulp & Paper Research Journal, vol. 24: 3, pp. 255-265.    

Walter, K. , Paulsson, M. & Wackerberg, E. (2009). Energy efficient refining of Black spruce TMP by using acid hydrogen peroxide : Part 2. Washing, chelating and bleaching studies. Nordic Pulp & Paper Research Journal, vol. 24: 3, pp. 266-272.    

Svensson, B. A. , Nyström, S. K. , Gradin, P. A. & Höglund, H. (2009). Frictional testing of wood : Initial studies with a new device. Tribology International, vol. 42: 1, pp. 190-196.  

Walker, P. W. , Allen, G. R. , Davies, N. W. , Smith, J. A. , Molesworth, P. P. , Nilsson, A. , Andersson, F. & Hedenström, E. (2009). Identification, Synthesis and Field Testing of (3Z,6Z,9Z)-3,6,9-Henicosatriene, a Second Bioactive Component of the Sex Pheromone of the Autumn Gum Moth, Mnesampela privata. Journal of Chemical Ecology, vol. 35: 12, pp. 1411-1422.  

Alison, M. L. , Price, R. K. , Strain, J. J. , Dimberg, L. H. , Sunnerheim, K. & Welch, R. W. (2009). In Vitro Antioxidant Activity and Antigenotoxic Effects of Avenanthramides and Related Compounds. Journal of Agricultural and Food Chemistry, vol. 57: 22, pp. 10619-10624.  

Norgren, S. & Höglund, H. (2009). Irreversible long fibre collapse at high temperature refining in a TMP system : Effects on fibre and surface properties. Nordic Pulp & Paper Research Journal, vol. 24: 1, pp. 19-24.    

Zhang, R. , Hummelgård, M. & Olin, H. (2009). Large area porous gold films deposited by evaporation-induced colloidal crystal growth. Journal of Colloid and Interface Science, vol. 340: 1, pp. 58-61.  

Halvarsson, S. , Edlund, H. & Norgren, M. (2009). Manufacture of non-resin wheat straw fibreboards. Industrial crops and products (Print), vol. 29: 2-3, pp. 437-445.  

Dahlström, C. & Uesaka, T. (2009). New Insights into Coating Uniformity and Base Sheet Structures. Industrial & Engineering Chemistry Research, vol. 48: 23, pp. 10472-10478.  

Berg, J. , Gulliksson, M. E. & Gradin, P. A. (2009). On the energy consumption for crack development in fibre wall in disc refining - A micromechanical approach. Holzforschung, vol. 63: 2, pp. 204-210.  

Fagerlund, A. , Sunnerheim, K. & Dimberg, L. H. (2009). Radical-scavenging and antioxidant activity of avenanthramides. Food Chemistry, vol. 113: 2, pp. 550-556.  

Isaksson, P. & Gradin, P. (2009). Shear buckling in the core of a corrugated board structure. Composite structures, vol. 88: 4, pp. 610-614.  

Zhang, R. , Hummelgård, M. & Olin, H. (2009). Simple and efficient gold nanoparticles deposition on carbon nanotubes with controllable particle sizes. Materials Science & Engineering, vol. 158: 1-3, pp. 48-52.  

Hedenström, E. , Edlund, H. , Wassgren, A. , Bergström, G. , Anderbrant, O. , Östrand, F. , Sierpinski, A. , Auger-Rozenberg, M. & et al. (2009). The Sex Pheromones of Two Pine Sawfly Species, Gilpinia frutetorum and Gilpinia socia : Chemical Identification, Synthesis and Biological Activity. Zeitschrift für Naturforschung C - A Journal of Biosciences, vol. 64: 9-10, pp. 733-742.

Fjellström, H. , Höglund, H. , Paulsson, M. & Forsberg, S. (2009). The UV-screening properties of coating layers : The influence of pigments, binders and additives. Nordic Pulp & Paper Research Journal, vol. 24: 2, pp. 206-212.    

Hellström, L. M. , Gradin, P. A. & Carlberg, T. (2008). A Method for Experimental Investigation of the Wood Chipping Process. Nordic Pulp & Paper Research Journal, vol. 23: 3, pp. 339-342.    

Holmgren, S. , Svensson, B. A. , Gradin, P. A. & Lundberg, B. (2008). An Encapsulated Split Hopkinson Pressure Bar for Testing of Wood at Elevated Strain Rate, Temperature and Pressure. Experimental techniques (Westport, Conn.), vol. 32: 5, pp. 44-50.  

Bäckström, M. , Kolar, M. & Htun, M. (2008). Characterisation of fines from unbleached kraft pulps and their impact on sheet properties. Holzforschung, vol. 62: 5, pp. 546-552.  

Fjellström, H. , Höglund, H. , Paulsson, M. & Rundlöf, M. (2008). Discolouration of mechanical and chemimechanical pulps : influence of wood raw material, process and ageing method. Nordic Pulp & Paper Research Journal, vol. 23: 1, pp. 14-18.    

Sikter, D. , Karlström, A. , Sandberg, C. & Engstrand, P. (2008). Economic perspectives on quality control in TMP refining processes. Nordic Pulp & Paper Research Journal, vol. 23: 3, pp. 305-314.    

Andersson, K. , Pranovich, A. , Norgren, M. , Eriksson, M. & Holmbom, B. (2008). Effects of biological treatment on the chemical structure of dissolved lignin-related substances in effluent from thermomechanical pulping. Nordic Pulp & Paper Research Journal, vol. 23: 2, pp. 164-171.    

Sjöberg, J. C. , Häggquist, M. , Wikström, M. , Lindström, T. & Höglund, H. (2008). Effects of pressurised high consistency refining on sheet density. Nordic Pulp & Paper Research Journal, vol. 23: 1, pp. 39-45.    

Klinga, N. , Höglund, H. & Sandberg, C. (2008). Energy efficient high quality CTMP for paperboard. Journal of Pulp and Paper Science (JPPS), vol. 34: 2, pp. 98-106.

Norgren, S. , Gradin, P. A. , Nyström, S. & Gullikson, M. (2008). Investigation of the z-direction strength properties of paper by use of acoustic emission monitoring. Journal of Acoustic Emission, vol. 26, pp. 23-31.

Liénard, M. A. , Strandh, M. , Hedenström, E. , Johansson, T. & Löfstedt, C. (2008). Key biosynthetic gene subfamily recruited for pheromone production prior to the extensive radiation of Lepidoptera. BMC Evolutionary Biology, vol. 8: 270    

Reyier, S. , Ferritsius, O. & Shagaev, O. (2008). Measuring the bonding ability distribution of fibers in mechanical pulps. TAPPI Journal, vol. 7: 12, pp. 26-32.

Nafari, A. , Karlen, D. , Rusu, C. , Svensson, K. , Olin, H. & Enoksson, P. (2008). MEMS sensor for in-situ TEM atomic force microscopy. Journal of microelectromechanical systems, vol. 17: 2, pp. 328-333.  

Norgren, S. & Höglund, H. (2008). Moisture-induced surface roughness in TMP sheets. Journal of Pulp and Paper Science (JPPS), vol. 34: 3, pp. 139-146.

Lindström, S. & Uesaka, T. (2008). Particle-level simulation of forming of the fiber network in papermaking. International Journal of Engineering Science, vol. 46: 9, pp. 858-876.  

Sabbani, S. , Stocks, P. A. , Ellis, G. L. , Davies, J. & Hedenström, E. (2008). Piperidine dispiro-1,2,4-trioxane analogues. Bioorganic & Medicinal Chemistry Letters, vol. 18: 21, pp. 5804-5808.  

Holmvall, M. & Uesaka, T. (2008). Print Uniformity of Corrugated Board in Flexo Printing: Effects of Corrugated Board and Halftone Dot Deformations.. Packaging technology & science, vol. 21: 7, pp. 385-394.  

Halvarsson, S. , Edlund, H. & Norgren, M. (2008). Properties of Medium Density Fibreboard (MDF) based on Wheat straw and Melamine Modified Urea Formaldehyde (UMF) Resin. Industrial crops and products (Print), vol. 28: 1, pp. 37-46.  

He, J. & Zhang, W. (2008). Research on ethanol synthesis from syngas. Journal of Zhejiang University - Science A, vol. 9: 5, pp. 714-719.  

Lindström, S. & Uesaka, T. (2008). Simulation of semidilute suspensions of non-Brownian fibres in shear flow. Journal of Chemical Physics, vol. 128: 2, pp. 024901  

Holmvall, M. & Uesaka, T. (2008). Striping of Corrugated Board in Full-tone Flexo Post-Printing. Appita journal, vol. 61: 1, pp. 35-40.

Bohman, B. , Nordenhem, H. , Sunnerheim, K. , Borg-Karlson, A. & Unelius, C. R. (2008). Structure-activity relationships of phenylpropanoids as antifeedants for the pine weevil Hylobius abietis. Journal of Chemical Ecology, vol. 34: 3, pp. 339-352.  

Logenius, L. , Friman, L. & Agnemo, R. (2008). The influence of temperature and moisture on the optical properties of cellulose in the presence of metal chlorides and glucuronic acid. Nordic Pulp & Paper Research Journal, vol. 23: 1, pp. 72-80.    

Logenius, L. , Friman, L. & Agnemo, R. (2008). The influence of temperature and moisture on the physical properties of cellulose in the presence of metal chlorides and glucuronic acid. Nordic Pulp & Paper Research Journal, vol. 23: 1, pp. 81-86.    

Nieberding, C. M. , de Vos, H. , Schneider, M. V. , Lassance, J. , Estramil, N. , Andersson, J. , Bång, J. , Hedenström, E. & et al. (2008). The Male Sex pheromone of the Butterfly Bicyclus anynana : Towards an Evolutionary Analysis. PLoS ONE, vol. 3: 7, pp. e2751    

Gradin, P. , Graham, D. , Nygård, P. & Vallen, H. (2008). The Use of Acoustic Emission Monitoring to Rank Paper Materials With Respect to their Fracture Toughness. Experimental mechanics, vol. 48: 1, pp. 133-137.  

Fjellström, H. , Höglund, H. , Forsberg, S. , Paulsson, M. & Rundlöf, M. (2007). A novel method of studying the ability of coating layer to retard the photo-yellowing of the base paper. Nordic Pulp & Paper Research Journal, vol. 22: 3, pp. 343-349.    

Högberg, B. & Olin, H. (2007). Anisotropically DNA-functionalized nanoparticle dimers. European Physical Journal D, vol. 43: 1-3, pp. 299-302.  

Kulachenko, A. , Gradin, P. & Uesaka, T. (2007). Basic mechanisms of fluting formation and retention in paper. Mechanics of materials (Print), vol. 39: 7, pp. 643-663.  

Högberg, B. & Olin, H. (2007). DNA-scaffolded nanoparticle structures. Journal of Physics, Conference Series, vol. 61: 1, pp. 458-462.    

Torgnysdotter, A. , Kulachenko, A. , Gradin, P. & Wågberg, L. (2007). Fiber/Fiber crosses : Finite Element Modelling and Comparison with Experiment. Journal of composite materials, vol. 41: 13, pp. 1603-1608.  

Andreasson, J. , Holmlund, J. , Knee, C. S. , Kall, M. , Borjesson, L. , Naler, S. , Bäckström, J. , Ruebhausen, M. & et al. (2007). Franck-Condon higher order lattice excitations in the LaFe1-xCrxO3 (x=0, 0.1, 0.5, 0.9, 1.0) perovskites due to Fe-Cr charge transfer effects. Physical Review B Condensed Matter, vol. 75  

Svensson, B. , Vesterlind, E. & Höglund, H. (2007). Frictional properties of native and chemically modified birch wood. Nordic Pulp & Paper Research Journal, vol. 22: 3, pp. 325-330.    

Pettersson, G. , Sjöberg, J. , Wågberg, L. , Höglund, H. & Averheim, A. (2007). Increased joint-forming ability of ductile kraft pulp fibres by polyelectrolyte multilayer treatment-Influence of refining and drying strategies. Nordic Pulp & Paper Research Journal, vol. 22: 2, pp. 228-235.    

Fjellström, H. , Höglund, H. , Forsberg, S. & Paulsson, M. (2007). Inhibition of light-induced brightness reversion of high-yield pulps : the UV-screening properties of coating layers containing kaolin or calcium carbonate pigments. Nordic Pulp & Paper Research Journal, vol. 22: 3, pp. 350-355.    

Engqvist, C. , Forsberg, S. , Norgren, M. , Edlund, H. , Andreasson, B. & Karlsson, O. (2007). Interactions between single latex particles and silica surfaces studied with AFM. Colloids and Surfaces A, vol. 302: 1-3, pp. 197-203.  

Fjellström, H. , Höglund, H. & Paulsson, M. (2007). Light-induced yellowing of mechanical and chemimechanical pulp sheets : influence of wood raw material, process and ageing method. Nordic Pulp & Paper Research Journal, vol. 22: 1, pp. 117-123.    

Sabbani, S. , Hedenström, E. & Andersson, J. (2007). Lipase catalyzed acylation of primary alcohols with remotely located stereogenic centres : the resolution of (± ) -4,4 -dimethyl -3 -phenyl -1 -pentanol. Tetrahedron, vol. 18: 14, pp. 1712-1720.  

Krusper, A. , Isaksson, P. & Gradin, P. A. (2007). Modelling of out-of-plane compression loading of corrugated paper board structures. Journal of engineering mechanics, vol. 133: 11, pp. 1171-1177.  

Kulachenko, A. , Gradin, P. & Kuivurova, H. (2007). Modelling the dynamical behaviour of a paper web : Part I. Computers and Structures, vol. 85: 3-4, pp. 131-147.  

Kulachenko, A. , Gradin, P. & Kuivurova, H. (2007). Modelling the dynamical behaviour of a paper web : Part II. Computers and Structures, vol. 85: 3-4, pp. 148-157.  

Holmvall, M. & Uesaka, T. (2007). Nip Mechanics of Flexo Post-Printing on Corrugated Board.. Journal of composite materials, vol. 41: 17, pp. 2129-2145.  

Klinga, N. , Höglund, H. & Sandberg, C. (2007). Paper properties of TMP and CTMP handsheets from spruce, as affected by the press load and temperature during sheet drying. Nordic Pulp & Paper Research Journal, vol. 22: 4, pp. 468-474.    

Klinga, N. , Höglund, H. & Sandberg, C. (2007). Paper properties of TMP and CTMP handsheets from spruce, as affected by the solids content from pressing. Nordic Pulp & Paper Research Journal, vol. 22: 4, pp. 475-480.    

Deng, X. , Ferahi, M. & Uesaka, T. (2007). Pressroom Runnability : A Comprehensive Analysis of Press Room and Mill Database. Pulp & paper Canada, vol. 108: 2, pp. 42-51.

Sunnerheim, K. (2007). Quantitative structure-activity relationships of pine weevil antifeedants, a Multivariate approach. Journal of Agricultural and Food Chemistry, vol. 55: 23, pp. 9365-9372.  

Sjöberg, J. & Höglund, H. (2007). Refining systems for sack paper, Part II : Plug screw and Bivis treatment under pressurised conditions and subsequent LC refining. Nordic Pulp & Paper Research Journal, vol. 22: 1, pp. 61-71.    

Andzane, J. , Tobin, J. M. , Li, Z. , Prikulis, J. , Baxendale, M. , Olin, H. , Holmes, j. D. & Erts, D. (2007). Selection of Application Specific Single and Multi Walled Carbon Nanotubes by In Situ Characterization of Conductive and Field Emission Properties. AZojono - Journal of Nanotechnology online,  

Isaksson, P. , Krusper, A. & Gradin, P. A. (2007). Shear correction factors for corrugated core structures. Composite structures, vol. 80: 1, pp. 123-130.  

Lindström, S. & Uesaka, T. (2007). Simulation of the motion of flexible fibres in viscous fluid flow. Physics of fluids, vol. 19: 11  

Norgren, M. , Gärdlund, L. , Notley, S. M. , Htun, M. & Wågberg, L. (2007). Smooth model surfaces from lignin derivatives : II. Adsorption of polyelectrolytes and PECs monitored by QCM-D. Langmuir, vol. 23: 7, pp. 3737-3743.  

Karlsson, S. , Andersson, F. , Breistein, P. & Hedenström, E. (2007). Synthesis of butenolides recently isolated from marine microorganisms. Tetrahedron Letters, vol. 48: 44, pp. 7878-7881.  

Torgnysdotter, A. , Kulachenko, A. , Gradin, P. & Wågberg, L. (2007). The Link Between the Fiber Contact Zone and the Physical Properties of Paper : A Way to Control Paper Properties. Journal of composite materials, vol. 41: 13, pp. 1619-1633.  

Vesterlind, E. & Höglund, H. (2006). A method to optimise birch CTMP pre-treatments by direct measurement of brightness on birch wood. Nordic Pulp & Paper Research Journal, vol. 21: 3, pp. 419-425.    

Vesterlind, E. & Höglund, H. (2006). Chemitermomechanical pulp made from birch at high temperature. Nordic Pulp & Paper Research Journal, vol. 21: 2, pp. 216-221.    

Breistein, P. , Karlsson, S. & Hedenström, E. (2006). Chiral pyrrolidinium salts as organocatalysts in stereoselective 1,4-conjugate addition of N-methylpyrrole to cyclopent-1-ene carbaldehyde. Tetrahedron: Asymmetry, vol. 17: 1, pp. 107-111.  

Batchelor, W. J. , Westerlind, B. S. , Hägglund, R. & Gradin, P. (2006). Effect of test conditions on measured loads and displacements in zero-span testing. TAPPI Journal, vol. 5: 10, pp. 3-8.

Svensson, B. (2006). Friktionens inverkan på energiförbrukning vid mekanisk massaframställning. Nordisk Papper & Massa, vol. 7: 6, pp. 20-22.

Lyytikäinen-Saarenmaa, P. , Varama, M. , Anderbrant, O. , Kukkola, M. , Kokkonen, A. , Hedenström, E. & Högberg, H. (2006). Monitoring the European pine sawfly with pheromone traps in maturing Scots pine stands. Agricultural and Forest Entomology, vol. 8: 1, pp. 7-15.  

Högberg, B. & Olin, H. (2006). Programmable self-assembly - Unique structures and bond uniqueness. Journal of Computational and Theoretical Nanoscience, vol. 3: 3, pp. 391-397.

Holmlund, J. , Andreasson, J. , Knee, C. S. , Bäckström, J. , Kall, M. , Osada, M. , Noji, T. , Koike, Y. & et al. (2006). Resonant two-phonon Raman scattering as a probe of hole crystal formation in Sr14-xCaxCu24O41. Physical Review B. Condensed Matter and Materials Physics, vol. 74

Hedenström, E. , Edlund, H. , Wassgren, A. , Bergström, G. , Anderbrant, O. , Östrand, F. , Sierpinski, A. , Auger-Rozenberg, M. & et al. (2006). Sex pheromone of the pine sawfly, Gilpinia pallida: Chemical identification, synthesis, and biological activity. Journal of Chemical Ecology, vol. 32: 11, pp. 2525-2541.  

Svensson, B. , Rundlöf, M. & Höglund, H. (2006). Sliding Friction Between Wood and Steel in a Saturated Steam Environment. Journal of Pulp and Paper Science (JPPS), vol. 32: 1, pp. 38-43.

Högberg, B. , Helmersson, J. , Holm, S. & Olin, H. (2006). Study of DNA-Coated Nanoparticles as Possible Programmable Self-Assembly Building-Blocks. Applied Surface Science, vol. 252: 15, pp. 5538-5541.  

Andersson, F. & Hedenström, E. (2006). Synthesis of two (S)-indoline-based chiral auxiliaries and their use in diastereoselective alkylation reactions. Tetrahedron, vol. 17: 13, pp. 1952-1957.  

Sabbani, S. , Hedenström, E. & Nordin, O. (2006). The enantioselectivity of Candida rugosa lipase is influenced by the particle size of the immobilising support material Accurel. Journal of Molecular Catalysis B, vol. 42: 1-2, pp. 1-9.  

Isaksson, P. , Kulachenko, A. & Gradin, P. A. (2006). The onset and progression of damage in isotropic paper sheets. International Journal of Solids and Structures, vol. 43: 3-4, pp. 713-726.  

Pettersson, G. , Höglund, H. & Wågberg, L. (2006). The use of polyelectrolyte multilayers of cationic starch and CMC to enhance strength properties of papers formed from mixtures of unbleached chemical pulp and CTMP : Part I. Nordic Pulp & Paper Research Journal, vol. 21: 1, pp. 115-121.    

Pettersson, G. , Höglund, H. & Wågberg, L. (2006). The use of polyelectrolyte multilayers of cationic starch and CMC to enhance strength properties of papers formed from mixtures of unbleached chemical pulp and CTMP-II : Part II: Influnence of addition strategy, fibre treatment and fibre type. Nordic Pulp & Paper Research Journal, vol. 21: 1, pp. 122-128.    

Isaksson, P. & Gradin, P. A. (2005). A bending specimen for constant energy release rate under controlled displacement conditions. Engineering Fracture Mechanics, vol. 72: 11, pp. 1770-1775.  

Nafari, A. , Danilov, A. , Rödjegård, H. , Enoksson, P. & Olin, H. (2005). A micromachined nanoindentation force sensor. Sensors and Actuators A-Physical, vol. 123-124, pp. 44-49.  

Kulachenko, A. , Gradin, P. A. & Westerlind, B. (2005). Analysis of Paper Web Tension Profiles. Journal of Graphic Technology, : 2, pp. 72-81.

Eriksson, M. , Pettersson, G. & Wågberg, L. (2005). Application of polymeric multilayers of starch onto wood fibres to enhance strength properties of paper. Nordic Pulp & Paper Research Journal, vol. 20: 3, pp. 270-275.    

Iliev, M. N. , Popov, V. N. , Litvinchuk, A. P. , Abrashev, M. V. , Bäckström, J. , Sun, Y. Y. , Meng, R. L. & Chu, C. W. (2005). Comparative Raman studies of Sr$_2$RuO$_4$, Sr$_3$Ru$_2$O$_7$ and Sr$_4$Ru$_3$O$_10$. Physical Review B Condensed Matter, vol. 358: 1--4

Schulz, B. , Bäckström, J. , Budelmann, D. , Maeser, R. , Rubhausen, M. , Klein, M. V. , Schoeffel, E. , Mihill, A. & et al. (2005). Fully reflective deep ultraviolet to near infrared spectrometer and entrance optics for resonance Raman spectroscopy. Review of Scientific Instruments, vol. 76

Osada, M. , Kall, M. , Bäckström, J. , Kakihana, M. , Andersen, N. H. & Borjesson, L. (2005). In situ resonant Raman scattering and reversible photoinduced structural change in YBa2Cu3O6+x. Physical Review B Condensed Matter, vol. 71

Rauer, R. , Neuber, G. , Kunze, J. , Bäckström, J. , Rubhausen, M. , Walter, T. & Dorr, K. (2005). Magneto-optical investigation of spin polarisation of La0.71Ca0.3MnO3 and La0.7Sr0.3MnO3. Journal of Magnetism and Magnetic Materials, vol. 290, pp. 948-951.

Bydén Sjöbom, M. , Marques, E. , Edlund, H. & Khan, A. (2005). Phase Equilibria of the Mixed Didodecyldimethylammonium Bromide-Taurodeoxycholate-Water System with a Large Solution Region.. Colloids and Surfaces, vol. 269: 1-3, pp. 87-95.  

Uesaka, T. (2005). Principal Factors Controlling Web Breaks in Pressrooms : quantitative evaluation. Appita journal, vol. 58: 6, pp. 425-432.

Sjöberg, J. & Höglund, H. (2005). Refining system for sack paper pulp: Part I HC refining under pressurised conditions and subsequent LC refining. Nordic Pulp & Paper Research Journal, vol. 20: 3, pp. 320-328.    

Anderbrant, O. , Östrand, F. , Bergström, G. , Wassgren, A. , Auger-Rozenberg, M. , Geri, C. , Hedenström, E. & Högberg, H. (2005). Release of sex pheromone and its precursors in the pine sawfly Diprion pini (Hym., Diprionidae). Chemoecology, vol. 15: 3, pp. 147-151.  

Zhang, Z. , Wang, H. , Chen, G. , Anderbrant, O. , Zhang, Y. , Zhou, S. , Hedenström, E. & Högberg, H. (2005). Sex pheromone for monitoring flight periods and population densities of the pine sawfly, Diprion jingyuanensis. Journal of Applied Entomology, vol. 129: 7, pp. 368-374.  

Lindström, M. , Hedenström, E. , Bouilly, S. , Velonia, K. & Smonou, I. (2005). Synthesis of diastereo- and enantiomerically pure anti-3-methyl-1,4-pentanediol via lipase catalysed acylation : Tetrahedron: Asymmetry. Tetrahedron: Asymmetry, vol. 16: 7, pp. 1355-1360.  

Rauer, R. , Neuber, G. , Kunze, J. , Bäckström, J. & Rubhausen, M. (2005). Temperature-dependent spectral generalized magneto-optical ellipsometry for ferromagnetic compounds. Review of Scientific Instruments, vol. 76

Wågberg, L. , Pettersson, G. & Notley, S. (2004). Adsorption of bilayers and multilayers of cationic and anionic copolymers of acrylamide on silcon oxide. Journal of Colloid and Interface Science, vol. 274: 2, pp. 480-488.  

Ziegler, K. , Lyons, D. , Holmes, J. , Erts, D. , Polyakov, B. , Olin, H. , Svensson, K. & Olsson, E. (2004). Bistable nanoelectromechanical devices. Applied Physics Letters, vol. 84: 20, pp. 4074-4076.  

Isaksson, P. , Hägglund, R. & Gradin, P. (2004). Continuum damage mechanics applied to paper. International Journal of Solids and Structures, vol. 41: 16-17, pp. 4731-4755.  

Neuber, G. , Rauer, R. , Kunze, J. , Bäckström, J. & Rubhausen, M. (2004). Generalized magneto-optical ellipsometry in ferromagnetic metals. Thin Solid Films, vol. 455, pp. 39-42.

Andersson, F. & Hedenström, E. (2004). Highly stereoselective alkylation of (S)-proline-based chiral auxiliaries. Tetrahedron, vol. 15: 16, pp. 2539-2545.  

Sunnerheim, K. & Bratt, K. (2004). Identification of centrolobol as the platyphylloside metabolite responsible for the observed effect on in vitro digestibility of hay.. Journal of Agricultural and Food Chemistry, vol. 52: 19, pp. 5869-5872.  

Steinbauer, M. J. , Östrand, F. , Bellas, T. , Nilsson, A. , Andersson, F. , Hedenström, E. , Lacey, M. & Schiestl, P. F. (2004). Identification, synthesis and activity of sex pheromone gland components of the autumn gum moth (Lepidoptera: Geometridae), a defoliator of Eucalyptus. Chemoecology, vol. 14: 3-4, pp. 217-223.  

Norgren, S. , Höglund, H. & Bäck, R. (2004). Irreversible long fibre collapse at high temperature TMP reject refining - initial studies. Pulp & paper Canada, vol. 105: 7, pp. 47-51.

Vidal, D. , Zou, X. & Uesaka, T. (2004). Modelling coating structure development : Monte-Carlo deposition of particles with irregular shapes. Nordic Pulp and Paper Research Journal, vol. 19: 4, pp. 420-427.    

Svensson, K. , Olin, H. & Olsson, E. (2004). Nanopipettes for metal transport. Physical Review Letters, vol. 93: 14, pp. 145901  

Bäckström, J. , Budelmann, D. , Rauer, R. , Rübhausen, M. , Rodríguez, H. & Adrian, H. (2004). Optical properties of YBa$_2$Cu$_3$O$_7 - \delta$ and PrBa$_2$Cu$_3$O$_7 - \delta$ films : High-energy correlations and metallicity. Physical Review B Condensed Matter, vol. 70: 17  

Kruger, R. , Schulz, B. , Naler, S. , Rauer, R. , Budelmann, D. , Bäckström, J. , Kim, K. H. , Cheong, S. W. & et al. (2004). Orbital ordering in LaMnO3 investigated by resonance Raman spectroscopy. Physical Review Letters, vol. 92

Persson, G. , Edlund, H. , Hedenström, E. & Lindblom, G. (2004). Phase Behavior of 1-Alkylpyridinium Octane-1-sulfonates : Effect of the 1-Alkylpyridinium Counterion Size. Langmuir, vol. 20: 4, pp. 1168-1179.  

Persson, P. V. , Schröder, J. , Wickholm, K. , Hedenström, E. & Iversen, T. (2004). Selective organocatalytic ring-opening polymerization : A versatile route to carbohydrate-functionalized poly(e-caprolactenes). Macromolecules, vol. 37: 16, pp. 5889-5893.  

Hägglund, R. , Gradin, P. & Tarakameh, D. (2004). Some Aspects on the Zero-span tensile test. Experimental mechanics, vol. 44: 4, pp. 365-374.  

Schulz, B. , Chan, D. , Bäckström, J. & Rubhausen, M. (2004). Spectroscopic ellipsometry on biological materials - investigation of hydration dynamics and structural properties. Thin Solid Films, vol. 455, pp. 731-734.

Hristopulos, D. & Uesaka, T. (2004). Structural disorder effects on the tensile strength distribution of heterogeneous brittle materials with emphasis on fiber networks. Physical Review B. Condensed Matter and Materials Physics, vol. 70: 6, pp. 64108  

Pokropivny, A. , Erts, D. , Pokropivny, V. , Lohmus, A. , Lohmus, R. & Olin, H. (2004). Study of Nanoscale Contacts with the Help of Combined TEM-AFM Technique and Theoretical MD-TM Calculations: In situ Transformations of Gold Nanowires. Physics of low-Dimensional structures, vol. 1-2, pp. 83-90.

Friman, L. , Höglund, H. , Högberg, H. & Agnemo, R. (2004). Tannin-iron impregnated thermomechanical pulp : Part I: Effects of extractions and heat on brightness. Nordic Pulp & Paper Research Journal, vol. 19: 2, pp. 229-236.    

Friman, L. , Höglund, H. , Högberg, H. & Agnemo, R. (2004). Tannin-iron impregnated thermomechanical pulp : Part II: Bleachability and brightness reversion. Nordic Pulp & Paper Research Journal, vol. 19: 4, pp. 525-531.    

Ziegler, K. , Ryan, K. , Rice, R. , Crowley, T. , Erts, D. , Olin, H. , Patterson, J. , Spalding, T. & et al. (2004). The synthesis of matrices of embedded semiconducting nanowires. Faraday discussions (Online), vol. 125, pp. 311-326.  

Semb, G. , Gradin, P. & Hällgren, I. (2003). An Analytical Study of a Composite Dove Tail Joint. Journal of Composite Materials, vol. 37: 2, pp. 99-109.

Budelmann, D. , Holmlund, J. , Andreasson, J. , Rodriguez, H. , Bäckström, J. , Borjesson, L. , Adrian, H. , Merkt, U. & et al. (2003). Antiferromagnetic and superconducting proximity effects in YBa2Cu3O7-delta/PrBa2Cu3O7-delta superlattices. Physical Review B Condensed Matter, vol. 67

Bratt, K. , Sunnerheim, K. , Bryngelsson, S. , Fagerlund, A. , Engman, L. , Andersson, R. E. & Dimberg, L. H. (2003). Avenanthramides in Oats (Avena Sativa L.) and Structure-Activity Relationships. Journal of Agricultural and Food Chemistry, vol. 51: 3, pp. 594-600.  

Amenitsch, H. , Edlund, H. , Khan, A. , Marques, E. & La Mesa, C. (2003). Bile Salts Form Lyotropic Liquid Crystals. Colloids and Surfaces A, vol. 213: 1, pp. 79-92.  

Bydén Sjöbom, M. , Hedenström, E. & Edlund, H. (2003). Binary Phase Equilibria of Three alfa-Methylsubstituted Sodium Alkanoate Surfactant Systems.. Journal of Colloid and Interface Science, vol. 257: 2, pp. 333-336.  

Svensson, K. , Jompol, Y. , Olin, H. & Olsson, E. (2003). Compact design of a transmission electron microscope-scanning tunneling microscope holder with three-dimensional coarse motion. Review of Scientific Instruments, vol. 74: 11, pp. 4945-4947.  

Friman, L. , Logenius, L. , Agnemo, R. & Högberg, H. (2003). Comparison of metal profiles in thermomechanical pulping processes in which either hydrogen peroxide or dithionite bleaching is used. Paperi ja Puu/Paper and timber, vol. 85: 6, pp. 334-339.

Norgren, M. & Edlund, H. (2003). Ion Specific Differences in Salt Induced Precipitation of Kraft Lignin. Nordic Pulp & Paper Research Journal, vol. 18: 4, pp. 400-403.    

Prikulis, J. , Murty, K. , Olin, H. & Käll, M. (2003). Large-area Topography Analysis and Near-field Raman Spectroscopy using Bent Fibre Probes. Journal of Microscopy, vol. 210: 3, pp. 269-273.  

Erts, D. , Olin, H. & Holmes, J. (2003). Metallic and Semiconducting Nanowires : Properties and Architectures. Proceedings of the SPIE - The International Society for Optical Engineering, vol. 5123, pp. 256-266.

Erts, D. , Polyakov, B. , Lohmus, A. , Lohmus, R. , Olin, H. , Morris, M. & Holmes, J. (2003). Metallic and Semiconducting Nanowires Studied by TEM-SPM. Physics of Low-Dimensional Structures, vol. 3/4, pp. 65-73.

Provatas, N. & Uesaka, T. (2003). Modelling paper structure and paper-press interactions. Journal of Pulp and Paper Science (JPPS), vol. 29: 10, pp. 332-340.

Kunze, J. , Naler, S. , Bäckström, J. , Rubhausen, M. & Mitchell, J. F. (2003). Optical study of competition between ordering and metallicity in La(2-2x)Sr(1+2x)Mn(2)O(7). Physical Review B Condensed Matter, vol. 67

Fagerlund, A. , Shanks, D. , Sunnerheim, K. , Engman, L. & Frisell, H. (2003). Protective effects of synthetic and naturally occurring antioxidants in pulp products. Nordic Pulp & Paper Research Journal, vol. 18, pp. 176-181.    

Erts, D. , Polyakov, B. , Olin, H. & Tuite, E. (2003). Spatial and Mechanical Properties of Dilute DNA Monolayers on Gold Imaged by AFM. Journal of physical chemistry B, vol. 107: 15, pp. 3591-3597.

Östrand, F. , Anderbrant, O. , Wassgren, A. , Bergström, G. , Hedenström, E. , Högberg, H. , Nguyen, B. & Larsson, M. (2003). Stereoisomeric composition of the sex pheromone of the pine sawfly Microdiprion pallipes (Hym., Diprionidae). Chemoecology, vol. 13: 3, pp. 155-162.  

Hedenström, E. , Edlund, H. & Lund, S. (2003). Stereoselective esterification of 2,6-dimethyl-1,7-heptanedioic acid, catalysed by Candida rugosa lipase. Journal of Molecular Catalysis B, vol. 23: 1, pp. 53-59.  

Wahlberg [Schröder], J. , Persson, P. V. , Olsson, T. , Hedenström, E. & Iversen, T. (2003). Structural Characterization of a Lipase-Catalyzed Copolymerization of epsilon-Caprolactone and D,L-Lactide. Biomacromolecules, vol. 4: 4, pp. 1068-1071.  

Crowley, T. , Ziegler, K. , Lyons, D. , Erts, D. , Olin, H. , Morris, M. & Holmes, J. (2003). Synthesis of metal and metal oxide nanowires and nanotube arrays within a mesoporous silica template. Chemistry of Materials, vol. 15: 18, pp. 3518-3522.  

Neuber, G. , Rauer, R. , Kunze, J. , Korn, T. , Pels, C. , Meier, G. , Merkt, U. , Bäckström, J. & et al. (2003). Temperature-dependent spectral generalized magneto-optical ellipsometry. Applied Physics Letters, vol. 83, pp. 4509-4511.

Persson, G. , Edlund, H. , Amenitsch, H. , Laggner, P. & Lindblom, G. (2003). The 1-monooleoyl-rac-glycerol/n-octyl-beta-D-glucoside/water system : Phase diagram and phase structures determined by NMR and X-ray diffraction. Langmuir, vol. 19: 14, pp. 5813-5822.  

Persson, G. , Edlund, H. & Lindblom, G. (2003). Thermal Behaviour of Cubic Phases Rich in 1-monooleoyl-rac-glycerol in the ternary system 1-monooleoyl-rac-glycerol / n-octyl-b-D-glucoside / Water.. European Journal of Biochemistry, vol. 270: 1, pp. 56-65.

Ryan, K. , Erts, D. , Olin, H. , Morris, M. & Holmes, J. (2003). Three Dimensional Architectures of Ultra-high Density Semiconducting Nanowires Deposited on Chip. Journal of the American Chemical Society, vol. 125: 20, pp. 6284-6288.

Norgren, M. , Edlund, H. & Wågberg, L. (2002). Aggregation of Lignin Derivatives under Alkaline Conditions. Kinetics and Aggregate Structure. Langmuir, vol. 18: 7, pp. 2859-2865.  

Raghavan, S. , Edlund, H. & Kaler, E. (2002). Cloud-Point Phenomena in Wormlike Micellar Systems Containing Catanionic Surfactant and Salt. Langmuir, vol. 18: 4, pp. 1056-1064.  

Bydén Sjöbom, M. & Edlund, H. (2002). Dependence of Alkyl Chain Asymmetry on the Phase Equilibria of Three Catanionic Surfactant Mixtures Containing Dodecyltrimethylammonium Chloride-Sodium Alkylcarboxylate-Water. Langmuir, vol. 18: 22, pp. 8309-8317.  

Hedenström, E. , Nguyen, B. & Silks III, L. A. (2002). Do enzymes recognise remotely located stereocentres? : Highly enantioselective Candida rugosa lipase-catalysed esterification of the 2- to 8-methyldecanoic acids. Tetrahedron, vol. 13: 8, pp. 835-844.  

Wågberg, L. , Forsberg, S. , Johansson, A. & Juntti, P. (2002). Engineering of fibre surface properties by application of the polyelectrolyte multilayer concept : Part I: Modification of paper strength. Journal of Pulp and Paper Science (JPPS), vol. 28: 7, pp. 222-228.

Erts, D. , Lohmus, A. , Olin, H. , Pokropivny, A. , Ryen, L. & Svensson, K. (2002). Force interactions and adhesion of gold contacts using a combined atomic force microscope and transmission electron microscope. Applied surface science, vol. 188: 3-4, pp. 460-466.

Norgren, M. , Edlund, H. , Wågberg, L. & Annergren, G. (2002). Fundamental Physical Aspects on Lignin Dissolution. Nordic Pulp & Paper Research Journal, vol. 17: 4, pp. 370-373.    

Schulz, B. , Chan, D. , Bäckström, J. , Rubhausen, M. , Wittern, K. P. , Wessel, S. , Wepf, R. & Williams, S. (2002). Hydration dynamics of human fingernails : An ellipsometric study. Physical Review E, vol. 65

Kolesnychenko, O. , Erts, D. , Shklyarevskii, O. , Olin, H. & van Kempen, H. (2002). Magnetic nanoparticles between electrodes of tunnel junction : anomalous tunnel conductance. Physica B, vol. 315: 1-3, pp. 171-178.

Martini, A. , Baldassari, N. , Baronio, P. , Anderbrant, O. , Hedenström, E. , Högberg, H. & Rocchetta, G. (2002). Mating disruption of the pine sawfly Neodiprion sertifer (Hymenoptera. Diprionidae) in isolated pine stands. Agricultural and Forest Enthomology, vol. 4: 3, pp. 195-201.  

Prikulis, J. , Xu, H. , Gunnarsson, L. , Käll, M. & Olin, H. (2002). Phase-sensitive near-field imaging of metal nanoparticles. Journal of applied physics, vol. 92: 10, pp. 6211-6214.

Anderbrant, O. , Hedenström, E. & Högberg, H. (2002). Pheromone mating disruption of the pine sawfly Neodiprion sertifer. : Is the size of the area important?. IOBC/WPRS Bulletin, vol. 25: 9, pp. 111-116.

Abrashev, M. V. , Bäckström, J. , Borjesson, L. , Popov, V. N. , Chakalov, R. A. , Kolev, N. , Meng, R. L. & Iliev, M. N. (2002). Raman spectroscopy of CaMnO(3) : Mode assignment and relationship between Raman line intensities and structural distortions. Physical Review B Condensed Matter, vol. 65: 18, pp. 1-9.  

Semb, G. & Gradin, P. A. (2002). Stresses and Strains in a Race Track Strap with a radical clearance. International Journal of Solids and Structures, vol. 39: 3, pp. 699-708.  

Hedenström, E. & Andersson, F. (2002). Syntheses of female sex pheromone precursors of pine sawflies species and of some structurally related methyl-branched long-chain 2-alkanols. Journal of Chemical Ecology, vol. 28: 6, pp. 1237-1254.  

Hedenström, E. , Edlund, H. , Lund, S. , Abersten, M. & Persson, D. (2002). Synthesis and lipase catalysed stereoselective acylation of some 3-methyl-2-alkanols, identified as sex pheromone precursors in females of pine sawfly species. Journal of The Chemical Society, Perkin Transactions 1, vol. 2002: 15, pp. 1810-1817.  

Rauer, R. , Bäckström, J. , Budelmann, D. , Kurfiss, M. , Schilling, M. , Rubhausen, M. , Walter, T. , Dorr, K. & et al. (2002). Thickness dependent phase separation in La0.7Ca0.3MnO3 films. Applied Physics Letters, vol. 81, pp. 3777-3779.

He, Q. & Zhang, W. (2001). A study on latent heat storage exchangers with the high-temperature phase-change material. International Journal of Energy Research, vol. 25: 4, pp. 331-341.  

Norgren, M. , Edlund, H. , Wågberg, L. , Lindström, B. & Annergren, G. (2001). Aggregation of Kraft Lignin Derivatives under Conditions Relevant to the Process. Part I. Phase Behaviour. Colloids and Surfaces A, vol. 194: 1-3, pp. 85-96.  

Widehammar, S. , Gradin, P. & Lundberg, B. (2001). Approximate determination of Dispersion Relations and Displacement Fields Associated With Elastic Waves in Bars. Journal of Sound and Vibration, vol. 246: 5, pp. 853-876.  

Rieske, L. K. , Townsend, L. , Anderbrant, O. , Hedenström, E. & Högberg, H. (2001). Captures of Male European Pine Sawflies, Neodiprion sertifer (Hymenoptera: Diprionidae), in Pheromone-baited Traps in Kentucky. Journal of entomological science, vol. 36: 1, pp. 67-73.

Berg, J. (2001). Effect of impact velocity on the fracture of wood as related to the mechanical pulping process. Wood Science and Technology, vol. 35: 4, pp. 343-351.  

Erts, D. , Lõhmus, A. , Lõhmus, R. & Olin, H. (2001). Instrumentation of STM and AFM combined with transmission electron microscope. Applied Physics A, vol. 72: 7, pp. 71-74.  

Breitholtz, M. , Kihlgren, T. , Lindgren, S. , Olin, H. , Wallden, L. & Wahlström, E. (2001). Metal quantum wells with all electrons confined: Na films and islands on graphite. Physical Review B (Condensed Matter and Materials Physics), vol. 64: 7, pp. 3301-3304.

Osada, M. , Kakihana, M. , Kall, M. , Bäckström, J. , Borjesson, L. & Andersen, N. H. (2001). Photoinduced effects and oxygen dynamics in YBa2Cu3Ox. Physica. C, Superconductivity, vol. 364, pp. 545-548.

Norgren, M. , Edlund, H. & Nilvebrant, N. (2001). Physiochemical differences between dissolved and precipitated Kraft lignin fragments as determined by PFG NMR, CZE and quantitative UV spectrophotometry. Journal of Pulp and Paper Science (JPPS), vol. 27: 11, pp. 359-363.

Raamat, R. , Lohmus, R. , Lohmus, A. , Liblik, P. , Lobjakas, M. , Montelius, L. , Lindahl, J. , Erts, D. & et al. (2001). Piezoresonance driver for positioning scanning probe microscopes in a wide temperature range. Ferroelectrics, vol. 258: 1-4, pp. 339-344.

Sveningsson, M. , Morjan, R. E. , Nerushev, O. A. , Sato, Y. , Bäckström, J. , Campbell, E. E. B. & Rohmund, F. (2001). Raman spectroscopy and field-emission properties of CVD-grown carbon-nanotube films. Applied Physics a-Materials Science & Processing, vol. 73, pp. 409-418.

Abrashev, M. V. , Bäckström, J. , Borjesson, L. , Pissas, M. , Kolev, N. & Iliev, M. N. (2001). Raman spectroscopy of the charge- and orbital-ordered state in La0.5Ca0.5MnO3. Physical Review B, vol. 64: 14  

Johansson, B. , Anderbrant, O. , Simandl, J. , Avtzis, N. , Salvadori, C. , Hedenström, E. , Edlund, H. & Högberg, H. (2001). Release Rates for Pine Sawfly Pheromones from Two Types of Dispensers and Phenology of Neodiprion sertifer. Journal of Chemical Ecology, vol. 27: 4, pp. 733-745.  

Norgren, M. & Edlund, H. (2001). Stabilisation of Kraft Lignin Solutions by Surfactant Additions. Colloids and Surfaces A, vol. 194: 1-3, pp. 239-248.  

Lohmus, R. , Erts, D. , Lohmus, A. , Svensson, K. , Jompol, Y. & Olin, H. (2001). STM and AFM instrumentation combined with transmission electron microscope : STM and AFM instrumentation combined with transmission electron microscope. Physics of Low-Dimensional Structures, vol. 3-4, pp. 81-89.

Hadjiev, V. G. , Bäckström, J. , Popov, V. N. , Iliev, M. N. , Meng, R. L. , Xue, Y. Y. & Chu, C. W. (2001). Symmetry of phonon, magnetic, and spin-phonon excitations in GdSr2RuCu2O8 single crystals. Physical Review B Condensed Matter, vol. 64

Larsson, M. , Nguyen, B. , Högberg, H. & Hedenström, E. (2001). Syntheses of the Sixteen Stereoisomers of 3,7,11-Trimethyl-2-tridecanol, Including the (2S,3S,7S,11R) and (2S,3S,7S,11S) Stereoisomers Identified as Pheromone Precursors in Females of the Pine Sawfly Microdiprion pallipes (Hymenoptera: Diprionidae). European Journal of Organic Chemistry, vol. 2001: 2, pp. 353-363.  

Berg, J. & Gradin, P. A. (2000). Effect of Temperature on Fracture of Spruce in Compression, Investigated by Use of Acoustic Emission Monitoring. Journal of Pulp and Paper Science (JPPS), vol. 26: 8, pp. 294-299.

Herz, A. , Heitland, W. , Anderbrant, O. , Edlund, H. & Hedenström, E. (2000). First use of pheromones to detect phenology patterns and density relationships of pine sawflies in German forests. Agricultural and Forest Entomology, vol. 2: 2, pp. 123-129.  

Anderbrant, O. , Löfqvist, J. , Högberg, H. , Hedenström, E. , Baldassari, N. , Baronio, P. , Kolmakova, G. , Lyons, B. & et al. (2000). Geographic Variation in the Field Response of Male Pine Sawflies Neodiprion sertifer, to Different Pheromone Stereoisomers and Esters. Entomologia Experimentalis et Applicata, vol. 95: 3, pp. 229-239.  

Nordin, O. , Nguyen, B. , Vörde, C. , Hedenström, E. & Högberg, H. (2000). Kinetic Resolution of Primary 2-methylalcohols via Pseudomonas cepacia Lipase Catalysed Enantioselective Acylation. Journal of The Chemical Society. Perkin Transactions 1, , pp. 367-376.  

Bjornsson, P. , Rubhausen, M. , Bäckström, J. , Kall, M. , Eriksson, S. , Eriksen, J. & Borjesson, L. (2000). Lattice and charge excitations in La1-xSrxMnO3. Physical Review B Condensed Matter, vol. 61, pp. 1193-1197.

Marques, E. F. , Edlund, H. , La Mesa, C. & Khan, A. (2000). Liquid Crystals and Phase Equilibria Binary Bile Salt-Water Systems. Langmuir, vol. 16: 11, pp. 5178-5186.  

Erts, D. , Olin, H. , Ryen, L. , Olsson, E. & Thölen, A. (2000). Maxwell and Sharvin conductance in gold point contacts investigated using TEM-STM. Physical Review B (Condensed Matter), vol. 61: 19, pp. 12725-12727.

Rundlöf, M. , Htun, M. , Höglund, H. & Wågberg, L. (2000). Mechanical pulp fines of poor quality - Characteristics and influence of white water. Journal of Pulp and Paper Science (JPPS), vol. 26: 9, pp. 308-316.

Marques, E. , Regev, O. , Edlund, H. & Khan, A. (2000). Micelles, Dispersions and Liquid Crystals in the Catanionic Mixture Bile Salt-Double-Chained Surfactant. The Bile Salt-Rich Area. Langmuir, vol. 16: 22, pp. 8255-8262.  

Kubatkin, S. , Danilov, D. , Olin, H. & Claeson, T. (2000). Phase transition in a nanometer-sized cluster of amorphous bismuth. Physical Review Letters, vol. 84: 84, pp. 5836-5839.

Bäckström, J. , Rübhausen, M. , Käll, M. , Börjesson, L. , Litvinchuk, A. P. , Kakihana, M. , Osada, M. & Dabrowski, B. (2000). Raman scattering in \RmYBa$_2$Cu$_4$O$_8$ and PrBa$_2$Cu$_4$O$_8$ : Indications of pseudogap effects in non-superconducting \RmPrBa$_2$Cu$_4$O$_8$. Physical Review B Condensed Matter, vol. 61, pp. 7049-7054.  

Bäckström, J. , Rubhausen, M. , Kall, M. , Borjesson, L. , Litvinchuk, A. P. , Kakihana, M. , Osada, M. & Dabrowski, B. (2000). Raman scattering in YBa2Cu4O8 and PrBa2Cu4O8 - indications of pseudogap effects in non-superconducting PrBa2Cu4O8. Physica. C, Superconductivity, vol. 341, pp. 2251-2252.

Osada, M. , Kakihana, M. , Bäckström, J. , Kall, M. & Borjesson, L. (2000). Resonant Raman scattering and photoinduced metastability in oxygen-deficient YBa2Cu3Ox. Physica C, vol. 338, pp. 157-160.

Wassgren, A. , Bergström, G. , Sierpinski, A. , Anderbrant, O. , Högberg, H. & Hedenström, E. (2000). Sex Pheromone of the Pine Sawfly Macrodiprion nemoralis (Hymenoptera : Diprionidae) : Identification of (2S,3R,7R,9S)-3,7,9-Trimethyl-2-tridecanol as the Precursor for the Active Pheromone Acetate. Die Naturwissenschaften, vol. 87: 1, pp. 24-29.  

Hedenström, E. , Andersson, F. & Hjalmarsson, M. (2000). Synthesis of N-propionylated (S)-(-)-2-(pyrrolidin-2-yl)propan-2-ol and its use as a chiral auxiliary and selectivity marker in asymmetric aldol reactions. Journal of the Chemical Society. Perkin Transactions 1, vol. 2000, pp. 1513-1518.  

Rundlöf, M. , Htun, M. , Höglund, H. & Wågberg, L. (2000). The importance of the experimental method when evaluating the quality of fines of mechanical pulps. Journal of Pulp and Paper Science (JPPS), vol. 26: 9, pp. 301-307.

Kubatkin, S. , Danilov, A. , Olin, H. & Claeson, T. (2000). Tunneling through a single quench-condensed cluster. Journal of Low Temperature Physics, vol. 118: 5-6, pp. 307-316.

Berg, J. & Gradin, P. A. (1999). A Micromechanical Model of the Deterioration of a Wood Fibre. Journal of Pulp and Paper Science, vol. 25: 2, pp. 66-71.

Kakihana, M. , Kato, S. , Petrykin, V. , Bäckström, J. , Borjesson, L. & Osada, M. (1999). A simple and reproducible way to synthesize PrBa2Cu4O8 under 1 atm of oxygen by amorphous citrate method. Physica. C, Superconductivity, vol. 321, pp. 74-80.

Bydén Sjöbom, M. , Edlund, H. & Lindström, B. (1999). BinaBinary Phase Equilibria and Structure of the Two α-Methyl-Substituted Surfactants Sodium (R)-2-Methyldecanoate and Racemic Sodium 2-Methyldecanoate ry Phase Exuilibria and Structure of the Chiral α-Methylsubstituted Surfactants Sodium (R)-2-Methyldecanoate and Racemic Sodium 2-Methyldecanoate. Langmuir, vol. 15: 8, pp. 2654-2660.  

Nguyen, B. & Hedenström, E. (1999). Candida rugosa lipase as an enantioselective catalyst in the esterification of methyl branched carboxylic acids : Resolution of rac-3,7-dimethyl-6-octenoic acid (citronellic acid). Tetrahedron: Asymmetry, vol. 10: 9, pp. 1821-1826.  

Ekvall, I. , Brauer, H. , Wahlström, E. & Olin, H. (1999). Locally modified charge-density waves in Na intercalated VSe2 studied by scanning tunneling microscopy and spectroscopy. Physical Review B (Condensed Matter), vol. 59: 11, pp. 7751-7761.

Gradin, P. A. , Johansson, O. , Berg, J. & Nyström, S. (1999). Measurement of the Power Distribution in a Single Disc Refiner. Journal of Pulp and Paper Science, vol. 25: 11, pp. 384-387.

Lyytikäinen-Saarenmaa, P. , Anderbrant, O. , Löfqvist, J. , Hedenström, E. & Högberg, H. (1999). Monitoring European pine sawfly population density with pheromone traps in young pine plantations. Forest Ecology and Management, vol. 124: 2-3, pp. 113-121.  

Wahlström, E. , Ekvall, I. , Olin, H. , Lindgren, S. & Wallden, L. (1999). Observation of ordered structures for S/Cu(111) at low temperature and coverage. Physical Review B (Condensed Matter), vol. 60: 15, pp. 10699-10702.

Ekvall, I. , Wahlström, E. , Claeson, D. , Olin, H. & Olsson, E. (1999). Preparation and characterization of electrochemically etched W tips for STM. Measurement Science & Technology, vol. 10: 1, pp. 11-18.

Karlsson, S. & Hedenström, E. (1999). Sex Pheromone of the Pine Sawfly Macrodiprion nemoralis : Stereoselective Synthesis of the Sixteen Stereoisomers of 3,7,9-Trimethyl-2-tridecyl Acetate. Acta Chemica Scandinavica, vol. 53: 8, pp. 620-630.

Nordin, O. , Hedenström, E. & Högberg, H. (1999). Stereochemistry of 1,6-Germacradien-5-ol, a Constituent of the Needles of Scots Pine Pinus silvestris) and the Defence Secretation from Larvae of the Pine Sawfly Neodiprion sertifer. Acta Chemica Scandinavica, vol. 53: 2, pp. 124-132.

Kubatkin, S. , Danilov, A. , Bogdanov, A. , Olin, H. & Claeson, T. (1998). Coulomb blockade effects at room temperature in thin-film nanoconstrictions fabricated by a novel technique. Applied Physics Letters, vol. 73: 24, pp. 3604-3606.

Edlund, H. , Khan, A. & La Mesa, C. (1998). Formation of a Liquid Crystalline Phase in the Sodium Taurodeoxycholate-Water System. Langmuir, vol. 14, pp. 3691-3697.

Blom, S. , Olin, H. , Costa-Kramer, J. , Garcia, N. , Jonson, M. , Serena, P. & Shekhter, R. (1998). Free-electron model for mesoscopic force fluctuations in nanowires. Physical Review B (Condensed Matter), vol. 57: 15, pp. 8830-8833.

Wahlström, E. , Ekvall, I. , Olin, H. & Wallden, L. (1998). Long-range interaction between adatoms at the Cu(111) surface imaged by scanning tunnelling microscopy. Applied Physics A (Materials Science Processing), vol. 66, pp. 1107-1110.

Edlund, H. , Bydén, M. , Lindström, B. & Khan, A. (1998). Phase Equilibria and Structure of the 1-dodecyl Pyridinium Bromide-Dodecane-Water System. Journal of Colloid and Interface Science, vol. 204: 2, pp. 312-319.

Kall, M. , Osada, M. , Bäckström, J. , Kakihana, M. , Borjesson, L. , Frello, T. , Madsen, J. , Andersen, N. H. & et al. (1998). Resonance Raman scattering as a probe of oxygen dynamics in YBa2Cu3Ox. Journal of Physics and Chemistry of Solids, vol. 59, pp. 1988-1990.

Kubatkin, S. , Danilov, A. , Bogdanov, A. , Olin, H. & Claeson, T. (1998). Room temperature SET effects in nanoconstricted granualar films. Journal of Surface Analysis, vol. 3, pp. 235-237.

Ekvall, I. , Brauer, H. , Olin, H. , Starnberg, H. & Wahlström, E. (1998). Scanning tunneling microscopy and spectroscopy of Na intercalation in VSe2. Applied Physics A (Materials Science Processing), vol. 66, pp. 197-201.

Erts, D. , Ivanov, Z. , Olin, H. , Claeson, T. , Chen, H. , Johansson, L. & Hu, Q. (1998). Screw-like structures in ex situ Tl2Ba2CuO6 films. Applied Physics A (Materials Science Processing), vol. 66, pp. 1223-1226.

Bergström, G. , Wassgren, A. , Anderbrant, O. , Ochieng, S. , Östrand, F. , Hansson, B. S. , Hedenström, E. & Högberg, H. (1998). Sex Pheromone of the Pine Sawfly Microdiprion pallipes (Hymenoptera: Diprionidae). Naturwissenschaften, vol. 85: 5, pp. 244-248.  

Erts, D. , Ahlberg, E. , Asbjörnsson, J. , Olin, H. & Prikulis, J. (1998). Studies of the initial oxidation of cobalt in alkaline solutions using scanning electrochemical microscope. Applied Physics A (Materials Science Processing), vol. 66, pp. 477-480.

Svensson, K. , Althoff, F. & Olin, H. (1997). A compact inertial slider STM. Measurement science and technology, vol. 8: 11, pp. 1360-1362.  

Kim, J. J. , Park, C. & Olin, H. (1997). A study of charge-density-waves associated with the periodic lattice distortion in 1T-VSe2 using a low temperature scanning tunneling microscope. JOURNAL OF THE KOREAN PHYSICAL SOCIETY, vol. 31, pp. 713-716.

Ekvall, I. , Kim, J. & Olin, H. (1997). Atomic and electronic structures of the two different layers in 4Hb-TaS2 at 4.2 K. Physical Review B (Condensed Matter), vol. 55: 11, pp. 6758-6761.

Costa-Kramer, J. , Garcia, N. & Olin, H. (1997). Conductance quantization histograms of gold nanowires at 4 K. Physical Review B Condensed Matter, vol. 55: 19, pp. 12910-12913.  

Costa-kramer, J. , Garcia, N. & Olin, H. (1997). Conductance quantization in bismuth nanowires at 4 K. Physical Review Letters, vol. 78: 26, pp. 4990-4993.  

Kim, J. J. & Olin, H. (1997). Electron localization probed by temperature-dependent tunneling spectroscopy in 1T-TaS2. Journal of the Korean Physical Society, vol. 31: 1, pp. 131-134.

Kim, J. J. & Olin, H. (1997). Low temperature scanning tunneling microscopy spectroscopy study of two different layers in poly-type 4Hb-TaS2 at 4.2 K. Journal of the Korean Physical Society, vol. 31, pp. 127-130.

Brauer, H. , Ekvall, I. , Olin, H. , Starnberg, H. , Wahlström, E. , Hughes, H. & Strocov, V. (1997). Na intercalation of VSe2 studied by photoemission and scanning tunneling microscopy. Physical Review B Condensed Matter, vol. 55: 15, pp. 10022-10026.

Edlund, H. , Sadaghiani, A. & Khan, A. (1997). Phase Behaviour and Phase Structure for Catanionic Surfactant Mixtures: DoTAC-SN-Water System. Langmuir, vol. 13, pp. 4953-4963.  

Hu, Q. H. , Johansson, L. G. , Chen, H. Q. , Ivanov, Z. G. , Erts, D. , Olin, H. , Claeson, T. & Stepantsov, E. A. (1997). Properties of Tl-2201 thin films. Physica. C, Superconductivity, vol. 282-287: Part 2, pp. 1075-1076.  

Nguyen, B. , Nordin, O. , Vörde, C. , Hedenström, E. & Högberg, H. (1997). Structure vs. Enantioselectivity in Pseudomonas cepacia Lipase Catalysed Transesterifications : Enantioselective Acylation of Primary 2-Methylalcohols. Tetrahedron: Asymmetry, vol. 8: 7, pp. 983-986.  

Edlund, H. , Bydén, M. , Lindström, B. & Khan, A. (1997). Ternary Phase Equilibria of the 1.dodecyl Pyridinium Bromide-Dodecanol-Water System. Journal of Colloid and Interface Science, vol. 196: 2, pp. 231-240.  

Carlsson, H. , Edlund, H. , Persson, G. & Lindström, B. (1996). Competition Between Monovalent and Divalent Counterions in a Surfactant / Water System. Journal of Colloid and Interface Science, vol. 180: 2, pp. 598-604.  

Zou, X. , Uesaka, T. & Norayer, G. (1996). Prediction of paper permanence by accelerated aging .1. Kinetic analysis of the aging process. Cellulose (London), vol. 3: 4, pp. 243-267.

Zou, X. , Uesaka, T. & Gurnagul, N. (1996). Prediction of paper permanence by accelerated aging .2. Comparison of the predictions with natural aging results. Cellulose (London), vol. 3: 4, pp. 269-279.

Edlund, H. , Berglund, P. , Jensen, M. , Hedenström, E. & Högberg, H. (1996). Resolution of 2-Methylalkanoic Acids : Enantioselective Esterification with Long Chain Alcohols Catalysed by Candida rugosa Lipase. Acta Chemica Scandinavica, vol. 50: 8, pp. 666-671.  

Vörde, C. , Högberg, H. & Hedenström, E. (1996). Resolution of 2-Methylalkanoic esters : Enantioselective Aminolysis by (R)-1-Phenylethyl-amine of Ethyl 2-Methyloctanoate Catalysed by Lipase B from Candida antarctica. Tetrahedron: Asymmetry, vol. 7: 5, pp. 1507-1513.  

Lundh, M. , Smitt, O. & Hedenström, E. (1996). Sex Pheromone of Pine Sawflies : Enantioselective Lipase Catalysed Transesterification of erythro-3,7-Dimethylpentadecan-2-ol, Diprionol. Tetrahedron: Asymmetry, vol. 7: 11, pp. 3277-3284.  

Kim, J. J. , Ekvall, I. & Olin, H. (1996). Temperature-dependent scanning tunneling spectroscopy of 1T-TaS2. Physical Review B Condensed Matter, vol. 54, pp. 2244-2248.  

Kim, J. J. , Ekvall, I. & Olin, H. (1996). Thermoelectric voltage study of 1T-TaS2 using temperature dependent scanning tunneling spectroscopy. Czechoslovak Journal of Physics, vol. 46, pp. 2599-2600.  

Kim, J. J. & Olin, H. (1995). Atomic- and electronic-structure study on the layers of 4Hb-TaS2 prepared by a layer-by-layer etching technique. Physical Review B. Condensed Matter and Materials Physics, vol. 52: 20, pp. 14388-14391.  

Paulsson, M. , Simonson, R. & Westermark, U. (1995). Chemical modification of lignin-rich paper : Part 2. Photostabilization by acetylation of paper made from spruce TMP and aspen CTMP. Nordic Pulp & Paper Research Journal, vol. 10: 1, pp. 62-67.

Anderbrant, O. , Löfqvist, E. , Hedenström, E. & Högberg, H. (1995). Development of mating disruption for control of pine sawfly populations. Entomologia Experimentalis et Applicata, vol. 74: 1, pp. 83-90.  

Lundh, M. , Nordin, O. , Hedenström, E. & Högberg, H. (1995). Enzyme Catalysed Irreversible Transesterifications with Vinyl Acetate : Are they really Irreversible?. Tetrahedron: Asymmetry, vol. 6: 9, pp. 2237-2244.  

Nilsson, P. A. , Brorsson, G. , Orliaquet, J. M. , Olsson, E. , Olin, H. , Gustafsson, M. & Claeson, T. (1995). Planarized patterning of Y-Ba-Cu-O thin films for multilayer technology. IEEE transactions on applied superconductivity (Print), vol. 5, pp. 1653-1656.  

Kim, Y. B. , Olin, H. , Park, S. Y. , Choi, J. W. , Komitov, L. , Matuszczyk, M. & Lagerwall, S. T. (1995). Rubbed polyimide films studied by scanning force microscopy. Applied Physics Letters, vol. 66, pp. 2218-2219.  

Bergström, G. , Wassgren, A. , Anderbrant, O. , Fägerhag, J. , Edlund, H. , Hedenström, E. , Högberg, H. , Geri, C. & et al. (1995). Sex pheromone of the pine sawfly Diprion pini (Hymenoptera: Diprionidae) : Chemical identification, synthesis and biological activity. Experientia, vol. 51: 4, pp. 370-380.  

Li, S. , Lundquist, K. & Paulsson, M. (1995). Synthesis of guaiacylglycerol β-guaiacyl ether. Acta Chemica Scandinavica, vol. 49: 8, pp. 623-624.

Zou, X. , Gurnagul, N. , Uesaka, T. & Bouchard, J. (1994). ACCELERATED AGING OF PAPERS OF PURE CELLULOSE - MECHANISM OF CELLULOSE DEGRADATION AND PAPER EMBRITTLEMENT. Polymer degradation and stability, vol. 43: 3, pp. 393-402.

Högberg, H. , Berglund, P. , Edlund, H. , Fägerhag, J. , Hedenström, E. , Lundh, M. , Nordin, O. , Servi, S. & et al. (1994). Biocatalysis As A Useful Tool In Pheromone Synthesis : Enantiomerically Pure Building-Blocks From Bakers-Yeast Reductions And Enzyme-Catalyzed Resolutions. Catalysis Today, vol. 22: 3, pp. 591-606.  

Paulsson, M. , Simonson, R. & Westermark, U. (1994). Chemical modification of lignin-rich paper : Part 1. Acetylation of paper made from spruce TMP and aspen CTMP. Evaluation of paper properties.. Nordic Pulp & Paper Research Journal, vol. 9: 4, pp. 232-236.

Kubatkin, S. E. , Olin, H. , Davidsson, P. , Danilov, A. V. & Claeson, T. (1994). Defect switching in a mesoscopic sample induced by a scanning tunnelling microscope. Journal of Physics, vol. 6, pp. L473-L478.  

Olin, H. (1994). Design of a scanning probe microscope. Measurement science and technology, vol. 5, pp. 976-984.  

Hedenström, E. & Högberg, H. (1994). Efficient Opening of trans-2,3-Epoxybutane by a Higher Order Cuprate : Synthesis of erythro-3.7-Dimethylpentadecan-2-yl Acetate, Pheromone of Pine Sawflies. Tetrahedron, vol. 50: 17, pp. 5225-5232.  

Högberg, H. , Hedenström, E. & Nordin, O. (1994). Enantioselective Transesterifications of 2-Methyl-1-alcohols Catalysed by Lipases from Pesudomonas. Tetrahedron: Asymmetry, vol. 5: 5, pp. 785-788.  

Bogdanov, A. L. , Erts, D. , Nilsson, B. & Olin, H. (1994). Fabrication of arrays of nanometer size test structures for scanning probe microscope tips characterization. Journal of Vacuum Science & Technology B, vol. 12: 6, pp. 3681-3684.  

Uesaka, T. (1994). GENERAL FORMULA FOR HYGROEXPANSION OF PAPER. Journal of Materials Science, vol. 29: 9, pp. 2373-2377.

Yi, H. R. , Ivanov, Z. G. , Winkler, D. , Zhang, Y. M. , Olin, H. , Larsson, P. & Claeson, T. (1994). Improved step edges on LaAlO3 substrates by using amorphous carbon etch masks. Applied Physics Letters, vol. 65, pp. 1177-1179.  

Kubatkin, S. E. , Olin, H. , Davidsson, P. , Danilov, A. V. & Claeson, T. (1994). Movement of scattering centers in a point contact induced by a scanning tunneling microscope. Physica. B, Condensed matter, vol. 194-196: Part 1, pp. 991-992.  

Johansson, L. G. , Claeson, T. , Ivanov, Z. G. , Olin, H. , Olsson, E. & Erts, D. (1994). Preparation and properties of Tl2Ba2CaCu2O8 thin films. Journal of Superconductivity, vol. 7: 4, pp. 767-771.  

Davidsson, P. & Olin, H. (1994). Vortex mapping on gold covered conventional type II superconductors using the very low temperature tunnelling microscope. Physica. B, Condensed matter, vol. 194-196: Part 1, pp. 375-376.  

Berglund, P. , Holmquist, M. , Hedenström, E. , Hult, K. & Högberg, H. (1993). 2-Methylalkanoic Acids Resolved by Esterification Catalysed by Candida rugosa : Alcohol Chain Length and Enantioselectivity. Tetrahedron: Asymmetry, vol. 4: 8, pp. 1869-1878.  

Nanri, Y. & Uesaka, T. (1993). DIMENSIONAL STABILITY OF MECHANICAL PULPS - DRYING SHRINKAGE AND HYGROEXPANSIVITY. TAPPI Journal, vol. 76: 6, pp. 62-66.

Gurnagul, N. , Howard, R. , Zou, X. , Uesaka, T. & Page, D. (1993). THE MECHANICAL PERMANENCE OF PAPER - A LITERATURE-REVIEW. Journal of Pulp and Paper Science (JPPS), vol. 19: 4, pp. J160-J166.

Zou, X. , Gurnagul, N. & Uesaka, T. (1993). THE ROLE OF LIGNIN IN THE MECHANICAL PERMANENCE OF PAPER .1. EFFECT OF LIGNIN CONTENT. Journal of Pulp and Paper Science (JPPS), vol. 19: 6, pp. J235-J239.

Högberg, H. , Edlund, H. , Berglund, P. & Hedenström, E. (1993). Water Activity Influences Enantioselectivity in a Lipase Catalysed Resolution by Esterification in an Organic Solvent. Tetrahedron: Asymmetry, vol. 4: 10, pp. 2123-2126.  

Davidsson, P. , Olin, H. , Persson, M. & Pehrson, S. (1992). DESIGN AND OPERATION OF A LOW-TEMPERATURE SCANNING TUNNELING MICROSCOPE SUITABLE FOR OPERATION BELOW 1-K. Ultramicroscopy, vol. 42-44, pp. 1470-1475.

Högberg, H. , Hedenström, E. , Fägerhag, J. & Servi, S. (1992). Enantioselective Synthesis Of (S)-2-Methyl-1-Alkanols Via Bakers-Yeast Mediated Reduction Of Alpha-Methyl-2-Thiophenepropenals. Journal of Organic Chemistry, vol. 57: 7, pp. 2052-2059.  

Anderbrant, O. , Löfqvist, J. , Högberg, H. , Hedenström, E. , Wassgren, A. , Bergström, G. , Bengtsson, M. & Magnusson, G. (1992). Field Response Of The Pine Sawfly Neodiprion-Sertifer To The Pheromone (2s,3s,7s)-Diprionyl Acetate And Its Stereoisomers. Entomologia Experimentalis et Applicata, vol. 62: 2, pp. 169-181.  

Wassgren, A. , Anderbrant, O. , Löfqvist, J. , Hansson, B. S. , Bergström, G. , Hedenström, E. & Högberg, H. (1992). Pheromone Related Compounds in Pupal and Adult Female Pine Sawflies, Neodiprion sertifer, of different Age and in different Parts of the Body. Journal of Insect Physiology, vol. 38: 11, pp. 885-893.  

Olin, H. , Brorsson, G. , Davidsson, P. , Ivanov, Z. G. , Nilsson, P. A. & Claeson, T. (1992). Scanning tunneling microscopy of laser-deposited YBCO thin films. ULTRAMICROSCOPY, vol. 42, pp. 734-737.

Hedenström, E. , Högberg, H. , Wassgren, A. , Bergström, G. , Löfqvist, J. , Hansson, B. & Anderbrant, O. (1992). Sex Pheromone of Pine Sawflies : Chiral Syntheses of some Active Minor Components Isolated from Neodiprion sertifer and of some Chiral Anologues of Diprionyl Acetate. Tetrahedron, vol. 48: 15, pp. 3139-3146.  

Bergström, G. , Wassgren, A. , Högberg, H. , Hedenström, E. , Hefetz, A. , Simon, D. , Ohlsson, T. & Löfqvist, J. (1992). Species specific, Two-Component, Volatile Signals in two Sympatric Ant-lion Species : Synclysis baetica and Acanthaclisis occitanica (Neuroptera, Myrmeleontidae. Journal of Chemical Ecology, vol. 17: 7, pp. 1177-1188.  

Uesaka, T. (1991). DIMENSIONAL STABILITY OF PAPER - UPGRADING PAPER PERFORMANCE IN END USE. Journal of Pulp and Paper Science (JPPS), vol. 17: 2, pp. J39-J46.

Holmberg, E. , Holmquist, M. , Hedenström, E. , Berglund, P. , Norin, T. , Högberg, H. & Hult, K. (1991). Reaction Conditions for the Resolution of 2-Methylalkanoic Acids in Esterification and Hydrolysis with Lipase from Candida cylindricea. Applied Microbiology and Biotechnology, vol. 35: 5, pp. 572-578.  

Hansson, B. S. , van der Pers, J. N. C. , Högberg, H. & Hedenström, E. (1991). Sex Pheromone Perception in male pine sawflies, Neodiprion sertifer (Hymenoptera; Diprionidae). Journal of Comparative Physiology A, vol. 168: 5, pp. 533-538.  

Brorsson, G. , Alarco, J. A. , Ivanov, Z. G. , Olin, H. , Nilsson, P. A. & Claeson, T. (1990). Study of in situ laser deposited YBCO thin-films. Journal of the less-common metals, vol. 164: Part A, pp. 383-390.

Högberg, H. , Hedenström, E. , Wassgren, A. , Hjalmarsson, M. , Bergström, G. , Löfqvist, J. & Norin, T. (1990). Synthesis and Gas Chromatographic Separation of the eight Stereoisomers of Diprionol and their Acetates, Components of the Sex Pheromone Pine Sawflies. Tetrahedron, vol. 46: 8, pp. 3007-3018.  

Hagen, N. & Berg, J. (1989). Filtration theory as applied to the dimensioning of flat band washers. TAPPI Journal, vol. 72: 6, pp. 93-96.

Högberg, H. , Hedenström, E. , Isaksson, R. & Wassgren, A. (1987). Preparation of the Four Stereoisomers of Chalcogran, Pheromone Component of Pityogenes chalcographus and of both Enantiomers of γ-Caprolactone, Pheromone Component of Trogoderma granarium.. Acta Chemica Scandinavica Series B, vol. 41: 9, pp. 694-697.  

Uesaka, T. , Murakami, K. & Imamura, R. (1979). BIAXIAL TENSILE BEHAVIOR OF PAPER. TAPPI Journal, vol. 62: 8, pp. 111-114.

Nelsson, E. , Sandberg, C. , Svensson-Rundlöf, E. , Muhic, D. , Engberg, B. A. & Engstrand, P. (). Substantially improved energy efficiency in mechanical pulping by new feeding segment design and low dosage sulfonation in mill scale. ,

Articles, reviews/surveys

Lindman, B. , Medronho, B. & Karlström, G. (2016). Clouding of nonionic surfactants. Current Opinion in Colloid & Interface Science, vol. 22, pp. 23-29.  

Afewerki, S. & Cordova, A. (2016). Combinations of Aminocatalysts and Metal Catalysts : A Powerful Cooperative Approach in Selective Organic Synthesis. Chemical Reviews, vol. 116: 22, pp. 13512-13570.  

Osong, S. H. , Norgren, S. & Engstrand, P. (2016). Processing of wood-based microfibrillated cellulose and nanofibrillated cellulose, and applications relating to papermaking: a review. Cellulose (London), vol. 23: 1, pp. 93-123.  

Enberg, S. , Opdal, Ø. , Axelsson, P. , Eriksen, Ø. , Rundlöf, M. & Paulsson, M. (2015). Mapping and modelling of optical properties from pulp to super calendered paper. Appita journal, vol. 68: 2, pp. 128-138

Norgren, M. & Edlund, H. (2014). Lignin : Recent advances and emerging applications. Current Opinion in Colloid & Interface Science, vol. 19, pp. 409-416.  

Zhang, R. & Olin, H. (2014). Porous Gold Films : A Short Review on Recent Progress. Materials, vol. 7, pp. 3834-3854.    

Paulsson, M. & Parkås, J. (2012). Review: Light-Induced Yellowing Of Lignocellulosic Pulps - Mechanisms And Preventive Methods. BioResources, vol. 7: 4, pp. 5995-6040.    

Zhang, R. & Olin, H. (2011). Gold-carbon nanotube nanocomposites - synthesis and applications. International Journal of Biomedical Nanoscience and Nanotechnology, vol. 2: 2, pp. 112-135.  

Göransson, K. , Söderlind, U. , He, J. & Zhang, W. (2011). Review of syngas production via biomass DFBGs. Renewable & sustainable energy reviews, vol. 15: 1, pp. 482-492.  

Gorski, D. , Hill, J. , Engstrand, P. & Johansson, L. (2010). Review: Reduction of energy consumption in TMP refining through mechanical pre-treatment of wood chips. Nordic Pulp & Paper Research Journal, vol. 25: 2, pp. 156-161.    

Books

Holmlund, S. & Olin, H. (2010). Nanorevolutionen : Från Nobelpris till din vardag. Stockholm : Santérus Förlag

Björkqvist, O. (1996). Perspectives on Demand Side Management.

Chapters in books

Hafrén, J. & Córdova, A. (2016). Organoclick : Applied Eco-Friendly and Metal-Free Catalysis for Wood and Fiber Modifications. In Industrial Biorenewables: A Practical Viewpoint. John Wiley & Sons. pp. 437-450.  

Dahlström, C. (2013). Sample Preparation Using Argon Ion Beam Milling. In Argon: Production, Characteristics and Applications. Hauppauge, NY : Nova Science Publishers, Inc.. pp. 223-240.

Córdova, A. & R., R. (2012). Aziridine Formation : in C-N Bond Formation. In Comprehensive Chirality. Oxford : Elsevier.

Uesaka, T. (2012). Mechanics in printing nip for paper and board. In Mechanics of paper products. Berlin : Mouton de Gruyter. pp. 181-193.

Uesaka, T. (2012). Statistical aspects of failure of paper and board. In Mechanics of paper products. Berlin : Mouton de Gruyter. pp. 139-159.

Uesaka, T. (2012). Web dynamics in paper transport systems. In Engineering Mechanics of Paper and Board Products. Berlin : Mouton de Gruyter. pp. 93-110.

Nafari, A. , Angenete, J. , Svensson, K. , Sanz-Velasco, A. & Olin, H. (2011). Combining Scanning Probe Microscopy and Transmission Electron Microscopy. In Scanning Probe Microscopy : Nanoscience and Nanotechnology 2. Berlin Heidelberg : Springer Berlin/Heidelberg (Nanoscience and Nanotechnology). pp. 59-99.  

Zhang, R. & Olin, H. (2011). Magnetic Nanoparticles in Biomedical Applications. In OMICS: Biomedical Perspectives and Applications. CRC Press.

Cordova, A. (2010). Asymmetric Bifunctional Catalysis Using Heterobimetallic and Multimetallic Systems in Catalytic Asymmetric Conjugate Reactions. In Catalytic Asymmetric Conjugate Reactions,. Weinheim : Wiley-VCH Verlagsgesellschaft. pp. 169-189.

Zhao, G. & Córdova, A. (2010). ECAs of Organolithium reagents, Grignard reagents and Examples of Cu-Catalyzed ECAs. In Catalytic Asymmetric Conjugate Reactions. Wiley-VCH Verlagsgesellschaft.  

Höglund, H. (2009). Mechanical Pulping. In Pulping Chemistry and Technology. Stockholm : KTH Royal Institute of Technology. pp. 57-90.  

Engstrand, P. & Johansson, B. (2009). Paper recycling. In Pulping Chemistry and Technology. Walter de Gruyter (Pulp and Paper Chemistry and Technology). pp. 391-427.  

Högberg, B. , Helmersson, J. , Boo, J. , Glans, L. & Olin, H. (2008). Programmable self-assembly: : Theoretical aspects and DNA-linked nanoparticles. In Systems Self-Assembly : Multidisciplinary Snapshots. Amsterdam : Elsevier (Studies in multidisciplinarity). pp. 245-258.  

Berglund, P. & Hedenström, E. (2001). Preparation of 2-, 3-, and 4-methylcarboxylic acids and the corresponding alcohols of high enantiopurity by lipase catalyzed esterification. In Enzymes in Nonaqueous Solvents : Methods and Protocols. Humana Press (Methods in Biotechnology). pp. 307-317.  

Collections (editor)

Niskanen, K. (ed.) (2012). Mechanics of paper products. Berlin : Walter de Gruyter

Córdova, A. (ed.) (2010). Catalytic Asymmetric Conjugate Reactions. Wiley-VCH Verlagsgesellschaft

Conference papers

Hedlund, A. , Stengard, A. & Björkqvist, O. (2017). A simulation-based method for evaluation of energy system cooperation between pulp and paper mills and a district heating system : A case study. In 19 World academy of science, engineering and technology conference proceedings.. pp. 1158--1164.

Forsberg, V. , Hummelgård, M. , Zhang, R. & Olin, H. (2017). Cellulose stabilizers for 2D materials inkjet inks. Paper presented at the 5th Nano today Conference, December 6-10, 2017, Waikoloa Beach Marriott, Hawaii, USA

Mattsson, A. & Uesaka, T. (2017). Creep failure of fibre network : The Origin of uncertainty. Paper presented at the Svenska mekanikdagar, Uppsala,12-13 juni, 2017  

Tran, K. , Klemsdal, A. J. , Zhang, W. , Sandquist, J. , Wang, L. & Skreiberg, Ø. (2017). Fast Hydrothermal Liquefaction of Native and Torrefied Wood. In Energy Procedia.. pp. 218--223.  

Forsberg, V. , Zhang, R. , Hummelgård, M. & Olin, H. (2017). The Influence of pH on the Stability of Inks of Two-Dimensional Materials for Digital Fabrication. Paper presented at the Printing for Fabrication 2017. Materials, Applications, and Processes. The 33nd International Conference on Digital Printing Technologies (NIP), November 5-9, 2017, Denver, USA

Zhang, W. , Henschel, T. , Söderlind, U. , Tran, K. & Han, X. (2017). Thermogravimetric and Online Gas Analysis on various Biomass Fuels. In Energy Procedia.. pp. 162--167.  

Mattsson, A. & Uesaka, T. (2017). Time-dependent, statistical failure of fibre network. Does Weibull distribution hold?. Paper presented at the Euromech colloquium - Deformation and damage mechanisms of wood-fibre network-based materials and structures, Stockholm, 7-9 juni, 2017

Forsberg, V. , Zhang, R. , Hummelgård, M. & Olin, H. (2017). Towards flexible and cheap printed electronics using inks of exfoliated 2D materials stabilized by cellulose. Paper presented at the MWP Symposium “Treenomics – From Genomic Information to Business Opportunities”

Forsberg, V. , Zhang, R. , Hummelgård, M. & Olin, H. (2017). Towards stable 2D materials inkjet inks : a study of stabilizers and MoS2 grades. Paper presented at the International Conference on Flexible and Printed Electronics, September 4-7, 2017, Korea

Abdipour, M. , Lorentzen, L. & Olin, H. (2016). A Design Research Lab—An Integrated Model to Identify Conscious and Unconscious Behavior in the Design Process. In Advances in Intelligent Systems and Computing : Design for Inclusion. (Advances in Intelligent Systems and Computing). pp. 553--563.  

Henschel, T. , Söderlind, U. & Zhang, W. (2016). A study on the pyrolysis behaviour of different biomass fuels using thermogravimetry and online gas analysis. In European Biomass Conference and Exhibition Proceedings.. pp. 1290--1293.

Johansson, O. , Fernando, D. , Fenitsius, R. , Daniel, G. & Ferritsius, O. (2016). Advancements in optical analysis yields new insight to mechanical pulping processes in an efficient and inexpensive way. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 267--276.

Eriksson, K. , Ferritsius, R. , Ferritsius, O. & Hill, J. (2016). Benefits from improved stability in process conditions and pulp properties-a double disc refiner case study. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 317--327.

Forsberg, S. , Kumar, V. , Engström, A. , Maristiina, N. , Dahlström, C. & Martti, T. (2016). Effect of calendering and coating formulations on conductivity in paper-based electrodes. Paper presented at the TAPPI Advanced Coating Symposium 2016, October 4-6, 2016, Stockholm

Engstrand, P. (2016). Energy efficient mechanical pulping – summary of the Scandinavian industry initiative research work 2011 - 2015. In 2016 International Mechanical Pulping Conference, Jacksonville, Florida, USA  September 28-30, 2016 : SESSION 11: INDUSTRY INITIATIVE FOR ENERGY REDUCTION. Georgia 30092 USA : . pp. 288--303.

Engstrand, P. , Gradin, P. , Hellström, L. , Carlberg, T. , Sandström, P. , Liden, J. , Söderberg, M. & Mats, E. (2016). Improved refining energy efficiency in thermo-mechanical pulping by means of collimated wood chipping – from solid mechanics to full scale evaluation. In PaperWeek Canada 2016 Conference February 1 to 5, 2016, Montreal : Technical Track Program.

Balliu, E. , Andersson, H. , Engholm, M. , Forsberg, S. & Olin, H. (2016). Laser-assisted reduction of graphene oxide for paper based large area flexible electronics. In Proceedings of SPIE - The International Society for Optical Engineering.  

Forsberg, V. , Zhang, R. , Andersson, H. , Bäckström, J. , Dahlström, C. , Norgren, M. , Andres, B. & Olin, H. (2016). Liquid Exfoliation of Layered Materials in Water for Inkjet Printing. In Printing for Fabrication 2016 : Materials, Applications, and Processes. USA :

Pettersson, G. , Norgren, S. , Höglund, H. & Engstrand, P. (2016). Low energy CTMP in strong and bulky paperboard plies. In Paper Conference and Trade Show, PaperCon 2016.. pp. 556--564.

Nelsson, E. , Sandberg, C. , Svensson-Rundlöf, E. , Paulsson, M. , Granfeldt, T. , Engberg, B. & Engstrand, P. (2016). Mill scale production of TMP with double disk refining-The effects of a mild sulfonation, atmospheric preheating and refining temperatures. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 249--259.

Moilanen, C. , Biörkgvist, T. , Ovaska, M. , Koivisto, J. , Miksic, A. , Engberg, B. , Salminen, L. , Saarenrinne, P. & et al. (2016). Modelling and simulation of radial spruce compression to optimize energy efficiency in mechanical pulping. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 18--35.

Osong, S. H. , Norgren, S. , Pettersson, G. , Engstrand, P. , Còrdova, A. , Afewerki, S. & Alimohammadzadeh, R. (2016). Processing of nanocellulose and applications relating to CTMP-based paperboard and foams. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 87--93.

Eriksson, K. , Ferritsius, J. , Ferritsius, O. , Ferritsius, R. , Hill, J. , Karlstrorrp, A. & Merseburg, K. (2016). Proper pulp sampling pre-requisite to any pulp property assessment. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 1--11.

Norgren, R. , Morgan, F. & Björkqvist, O. (2016). Pulp mill bio-sludge - sludge properties and recycling. In Proceedings of 5th International Conference on Industrial & Hazardous Waste Management, September 27th-30th, 2016, Chania, Kreta..    

Karlström, A. & Engstrand, P. (2016). Refining efficiency for future CTIVIP and TMP systems co-optimizing fundamental wood material knowledge with a soft sensor control approach. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 304--316.

Mattsson, A. & Uesaka, T. (2016). Statistical Failure of Fibre Network under Creep Condition. Paper presented at the VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete, Greece, 5 - 10 June 2016

Pettersson, G. , Norgren, S. & Höglund, H. (2016). Strong paper from spruce CTMP. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 229--233.

Sandberg, C. , Engstrand, P. & Berg, J. (2016). System Aspects on Low Consistency Refining of Mechanical Pulp. In TAPPI 2016 International Mechanical Pulping Conference (IMPC).. pp. 485--495.

Ferritsius, O. , Ferritsius, R. , Hill, J. , Eriksson, K. , Mörseburg, K. & Ferritsius, J. (2016). Untaught experiences regarding common practice and standards for sampling, characterization, control, and Design of TMP and CTMP operations. In International Mechanical Pulping Conference 2016, IMPC 2016.. pp. 12--17.

Andres, B. , Dahlström, C. , Engström, A. , Forsberg, S. , Blomquist, N. & Olin, H. (2015). Cellulose-based binder systems for electrochemical electrodes. Paper presented at the 2015 E-MRS Spring Meeting

Mattsson, A. & Uesaka, T. (2015). Characterisation of time-dependent, stochastic failure of fibre-based materials. Paper presented at the International Paper Physics Conference, Tokyo, 29 October - 1 November 2015

Uesaka, T. (2015). Complex matters: Things that matter. Paper presented at the Tokyo 2015: Joint Conference of International Paper Physics Conference and Paper and Coating Chemistry Symposium

Henshaw Osong, S. , Dahlström, C. , Forsberg, S. , Andres, B. , Engstrand, P. , Norgren, S. , Olin, H. & Engström, A. (2015). Development of CTMP-based nanofibrillated Cellulose /nanographite composites for paper applications. Paper presented at the 9th International Fundamental Mechanical Pulp Research Seminar, 19-20May, Trondheim, Norway

Osong, S. H. (2015). Development of nanofibrillated cellulose/nanographite composites for paper applications. In TAPPI International Conference on Nanotechnology for Renewable Materials 2015.. pp. 35--55.

Alecrim, V. , Zhang, R. , Hummelgård, M. , Andres, B. , Dahlström, C. , Norgren, M. , Andersson, M. & Olin, H. (2015). Exfoliated Layered Materials for Digital Fabrication. In NIP & Digital Fabrication Conference. (NIP & Digital Fabrication Conference). pp. 192--194.

Norgren, R. , Fröling, M. & Björkqvist, O. (2015). Industrial Symbiosis solutions for recycling of biosludge from the pulp industry. In Proceedings of Global Cleaner Production & Sustainable Consumption Conference  1 - 4 November 2015, Sitges, Barcelona, Spain.  

Andres, B. , Forsberg, S. & Olin, H. (2015). Influence of Electrode Mass Ratio on Capacitance of Supercapacitors. In Abstract Book, ISEECap 2015.. pp. 132-

Balliu, E. , Andersson, H. , Hummelgård, M. , Olin, H. & Engholm, M. (2015). Laser sintering of silver nano-particles inks printed on paper substrates. In Proceedings of SPIE - The International Society for Optical Engineering.. pp. Art. no. 935112-  

Faria, G. C. , Duong, D. T. , Dahlström, C. , Rivnay, J. , Malliaras, G. , Owens, R. & Salleo, A. (2015). Modeling Transient Drain Current Response in Biofunctionalized Organic Electrochemical Transistors. Paper presented at the XIV Brazil MRS meeting

Forsberg, S. , Andres, B. , Blomquist, N. , Dahlström, C. , Engström, A. & Olin, H. (2015). Paper-based supercapacitors. Paper presented at the 2015 E-MRS Spring Meeting, May 11-15, 2015, Lille, France

Dahlström, C. , Andres, B. , Faria, G. C. , Engström, A. , Duong, D. T. & Salleo, A. (2015). Structural Change of Cellulose Nanofibers in Supercapacitor Electrodes during Galvanostatic Cycling. Paper presented at the 2015 MRS Fall Meeting & Exhibit

Logenius, L. , Fjellström, H. & Engstrand, P. (2014). A sustainable analysis of sulphonic acid content in CTMP pulps. In International Mechanical Pulping Conference, IMPC 2014, part of PulPaper 2014 Conference. Espoo :

Walter, K. , Paulsson, M. & Engstrand, P. (2014). Acid hydrogen peroxide treatment of Norway spruce TMP : The effect of chelated ferric ions. In International Mechanical Pulping Conference, IMPC 2014.

Ferritsius, O. , Mörseburg, K. & Ferritsius, R. (2014). Bat of CTMP and TMP plants with respect to quality development and energy efficiency. In International Mechanical Pulping Conference, IMPC 2014.

He, J. , Engstrand, P. & Zhang, W. (2014). Bio-SNG production in a TMP Mill in comparison with BIGCC. In Energy Procedia.. pp. 2894--2897.    

Karlström, A. , Hill, J. , Ferritsius, O. , Ferritsius, R. & Engstrand, P. (2014). Can we increase the proportion of electrical energy into fibre development in existing HC-refiners?. In International Mechanical Pulping Conference, IMPC 2014.

Göransson, K. , Söderlind, U. & Zhang, W. (2014). CATALYTIC REDUCTION OF TAR/CH4 BY AN INTERNAL REFORMER IN A DFB GASIFIER. In European Biomass Conference & Exhibition Proceedings.. pp. 620--625.  

Andres, B. , Blomquist, N. , Forsberg, S. & Olin, H. (2014). Characterization of nanographite and graphene produced in a high-pressure homogenizer. In Graphene Week 2014.

Dahlström, C. , Andres, B. & Forsberg, S. (2014). Coating Uniformity and its Effect on Supercapacitor Capacitance. Paper presented at the 2014 TAPPI Advanced Coating Fundamentals Symposium

Osong, S. H. , Norgren, S. , Engstrand, P. , Lundberg, M. & Hansen, P. (2014). Development of nano-ligno-cellulose produced from mechanical pulp. In International Mechanical Pulping Conference, IMPC 2014.

Andres, B. , Forsberg, S. & Olin, H. (2014). Enhanced electrical and mechanical properties of nanographite electrodes for supercapacitors by addition of nanobrillated cellulose. Paper presented at the 28th International Winterschool on Electronic Properties of Novel Materials: Molecular Nanostructures (IWEPNM 2014), Kirchberg, Austria

Salmen, L. , Viforr, S. , Mårtensson, T. , Sixta, H. , Ylönen, T. , Fernando, D. , Daniel, G. , Sandström, P. & et al. (2014). Enzymatic chip treatment for TMP - Prospects. In International Mechanical Pulping Conference, IMPC 2014.

Alecrim, V. , Andres, B. , Zhang, R. , Hummelgård, M. , Shimizu, K. , Forsberg, S. , Andersson, M. & Olin, H. (2014). Exfoliated MoS2 for paper based supercapacitors and photodetectors. In Collection of Extent Abstracts.. pp. 437--438.

Alecrim, V. , Andres, B. , Zhang, R. , Hummelgård, M. , Blomquist, N. , Forsberg, S. , Engström, A. , Shimizu, K. & et al. (2014). Exfoliation of MoS2 for paper based applications. Paper presented at the MWP, Innovative paper-based products symposium, 2014

Alimadadi, M. & Uesaka, T. (2014). Exploring One-more Dimension of Paper: Properties of 3D-Orieneted Fiber Network. In Progress in Paper Physics Proceedings 2014.  

Hammarling, K. , Zhang, R. , Manuilskiy, A. & Nilsson, H. (2014). Fiber Bragg Grating filter using Evaporated Induced Self Assembly of silica nano particles. In Proceedings of SPIE - The International Society for Optical Engineering : Optical Components and Materials XI, 8982.. pp. Art. no. 898225-

Zhang, R. , Hummelgård, M. & Olin, H. (2014). Graphite-carbon nanotube flexible electrodes for dye-sensitized solar cells. Paper presented at the 2nd International conference on Clean Energy Science,13-16 April 2014 Qingdao, China

Norgren, S. , Pettersson, G. & Höglund, H. (2014). High strength papers from high yield pulps. In International Mechanical Pulping Conference, IMPC 2014. (International Mechanical Pulping Conference, IMPC 2014)

Nelsson, E. , Sandberg, C. , Svensson-Rundlöf, E. , Muhic, D. , Rohdén, L. , A. Engberg, B. & Engstrand, P. (2014). Improved energy efficiency in thermomechanical pulping through co-optimixation of intensity by segment design and wood softening by sulfonation. In International mechanical pulping conference IMPC 2014.

Andres, B. , Blomquist, N. , Forsberg, S. & Olin, H. (2014). Inexpensive production of graphene by mechanical treatment of graphite. In Graphene Study 2014.

Göransson, K. , Söderlind, U. , Henschel, T. , Engstrand, P. & Zhang, W. (2014). Internal tar/CH4 reforming in a biomass dual fluidised bed gasifier. In Proceeding of 4th International Symposium on Gasification and its Applications.

Berg, J. , Sandberg, C. , Engberg, B. & Engstrand, P. (2014). LC Refining Intensity In The Light Of Forces On Fibres. In International Mechanical Pulping Conference, IMPC 2014. Espoo :

Ferritsius, R. , Sandberg, C. & Ferritsius, O. (2014). LC-refining of mechanical pulps and its influence on fiber curl and handsheet strength properties. In International Mechanical Pulping Conference, IMPC 2014.

Moilanen, C. , Engberg, B. A. , Björkqvist, T. , Salminen, L. & Saarenrinne, P. (2014). Local compression behaviour of pre-fatigured and chemically pre-treated wood at high strain rate and high temperature. Paper presented at the International Mechanical Pulping Conference, IMPC 2014; Helsinki; Finland; 2 June 2014 through 5 June 2014; Code 109275

Engberg, B. , Logenius, L. & Engstrand, P. (2014). Mechanical properties of sulphonated wood in relation to wing refiner properties. In International Mechanical Pulping Conference, IMPC 2014. Espoo :

Ferritsius, R. , Hill, J. , Ferritsius, O. & Karlstrom, A. (2014). On energy efficiency in chip refining. In International Mechanical Pulping Conference, IMPC 2014.

Alecrim, V. , Zhang, R. , Hummelgård, M. , Andersson, H. , Andersson, M. & Olin, H. (2014). Photoconductivity of bulk and liquid processed MoS2. Paper presented at the 1st International Conference on Two Dimensional Materials  

Mattsson, A. & Uesaka, T. (2014). Predicting Stochastic Failure of Fibre-based Materials in Long Term and Short Term. Paper presented at the Progress in Paper Physics, Raleigh, North Carolina, U.S.A. September 8-11, 2014    

Pettersson, G. , Höglund, H. , Sjöberg, J. C. , Peng, F. , Bergström, J. , Solberg, D. , Norgren, S. , Hallgren, H. & et al. (2014). Strong and bulky paperboard plies from low energy CTMP. In International Mechanical Pulping Conference, IMPC 2014.

Mattsson, A. & Uesaka, T. (2014). Time-Dependent Stochastic Failure of Fibre Network. Paper presented at the 11th World Congress on Computational Mechanics, Barcelona Spain, 20-25 July 2014    

Zhang, R. , Andersson, H. , Andersson, M. , Andres, B. , Edström, P. , Edvardsson, S. , Forsberg, S. , Hummelgård, M. & et al. (2013). High-speed deposition of multilayer nanofilms using soap-film coating. Paper presented at the 19th International Vacuum Congress (IVC-19), Paris, France, September 9-13 2013

Moilanen, C. S. , Saarenrinne, P. , Engberg, B. & Björkqvist, T. (2013). Image Based local strain measurement of wood. In Conference Proceedings of the Society for Experimental Mechanics Series.  

Göransson, K. , Söderlind, U. & Zhang, W. (2013). Internal Tar/CH4 Reforming using a Novel Design in a Biomass Dual Fluidised Bed Gasifier. In 21st European Biomass Conference and Exhibition : Setting the course for a biobased ecomomy. Florence, Italy : (European Biomass Conference and Exhibition Proceedings). pp. 2038--2042.

Osong, S. H. , Engstrand, P. & Norgren, S. (2013). Mechanical Properties of high-yield pulp handsheets, as affected by blends of Nano-ligno-cellulose. Paper presented at the 2013 TAPPI International Conference on Nanotechnology for Renewable Materials, Stockholm, Sweden , 24-27 June 2013.

Logenius, L. , Engberg, B. A. , Fjellström, H. & Engstrand, P. (2013). Mechanical Properties of Sulphonated Spruce Wood. Paper presented at the 8th Fundamental mechanical pulping research seminar

Logenius, L. , Engberg, B. A. , Nelsson, E. & Engstrand, P. (2013). Mechanical testing methods for evaluation of the mechanical properties of sulphonated wood. Paper presented at the The 17th International Symposium on Wood, Fiber and Pulping Chemistry; Vancouver, Canada; 12-14 June 2013

Osong, S. H. , Norgren, S. & Engstrand, P. (2013). Nano-ligno-cellulose as strength enhancer in handsheets. Paper presented at the Marcus Wallenberg Prize (MWP 2013) - Young Researchers' Programme, Stockhom , Sweden, 23-24 Sept 2013.

Osong, S. H. , Norgren, S. & Engstrand, P. (2013). Nano-ligno-cellulose from mechanical pulp fines. Paper presented at the European Forest Products Doctoral Symposium 2013

Duan, R. , Norgren, M. , Hedenström, E. , Ibrahem, I. & Edlund, H. (2013). New approaches toward producing foamed materials from renewable sources.. Paper presented at the The 17th International Symposiumon Wood, Fiber and Pulping Chemistry, June 12-14, 2013, Canada

Osong, S. H. , Engstrand, P. & Norgren, S. (2013). New Products based on Mechanical Pulps : Nano-ligno-cellulose (NLC). Paper presented at the 8th International Fundamental Mechanical Pulp Research Seminar, Åre, Sweden, 29-31 Jan, 2013.

Fjellström, H. , Engstrand, P. & Htun, M. (2013). On the relationship between charged groups, chemical environment and delamination during refining.. Paper presented at the 8th International Fundamental Mechanical Pulp Research Seminar (IFMPRS), Åre, Sweden, Jan 29-31, 2013

Andres, B. (2013). Paper-based supercapacitors. In Young Researchers’ Abstracts 2013.

Uesaka, T. (2013). Performance-based Design of Corrugated Board and Box. Paper presented at the 2013 Paper Week: Annual Meeting of PAPTAC; 7 May, 2013

Zasadowski, D. , Norgren, M. & Edlund, H. (2013). Recovery of water-soluble hemicelluloses from TMP process water after selective flotation.. In The 17th International Symposiumon on Wood, Fiber and Pulping Chemistry.

Zasadowski, D. , Norgren, M. , Hedenström, E. , Willför, S. , Strand, A. & Sundberg, A. (2013). Selective froth flotation of pitch components from spruce TMP process water.. In The 17th International Symposiumon on Wood, Fiber and Pulping Chemistry.

Yang, J. , Norgren, M. & Edlund, H. (2013). Selective separation of wood substances from TMP mill process water by flotation. Analysis of the foam fraction.. Paper presented at the The 17th International Symposium on Wood, Fiber and Pulping Chemistry

Mattsson, A. & Uesaka, T. (2013). Time-dependent, statistical failure of paperboard in compression. In Advances in pulp and paper research, Cambridge 2013. UK :  

Uesaka, T. (2013). Variability, non-uniformity, and complexity: From product to process. In Advances in pulp and paper research, Cambridge 2013. Bury, UK :  

Osong, S. H. , Engstrand, P. & Norgren, S. (2012). A New Concept to Produce Nano-ligno-cellulose Materials by Means of High Pressure Homogenization. Paper presented at the 3rd International Cellulose Conference (ICC 2012), Oct 10-12, Sapporo, Japan.

Fjellström, H. , Engstrand, P. & Htun, M. (2012). Aspects of fibre wall swelling in high-yield pulp.. In PROCEEDING OF THE 4TH INTERNATIONAL CONFERENCE ON PULPING, PAPERMAKING AND BIOTECHNOLOGY (ICPPB '12), VOLS. I AND II.. pp. 1183--1186.  

Dahlström, C. & Uesaka, T. (2012). Coating Microstructures : Binder Distributions. In 12th TAPPI Advanced Coating Fundamentals Symposium Proceedings, Co-located with the 16th International Coating Science and Technology Symposium, ISCST 2012.. pp. 250--257.

Afewerki, S. (2012). Direct regiospecific and highly enantioselective intermolecular a-allylic alkylation of aldehydes by combination of transition metal and chiral amine catalysts. Paper presented at the ORGANIKERDAGARNA XXIII, 12-15 JUNE 2012 CONFERENCE CENTER WALLENBERG GÖTEBORG

Öhlund, T. & Andersson, M. (2012). Effect of Paper Properties on Electrical Conductivity and Pattern Definition for Silver Nanoparticle Inkjet Ink. In Proceedings of LOPE-C 2012.. pp. 115--119.

Uesaka, T. (2012). Fibre-fibre bond: What paper physicist sees. Paper presented at the Joint international conference of paper physics and paper/coating chemistry

Uesaka, T. , Wiklund, H. & Holmvall, M. (2012). Fluid-Structure Interactions in Random Fibre Networks. Paper presented at the ECCOMAS (European Congress of Computational Methods for Applied Sciences)

Duan, R. , Norgren, M. , Edlund, H. & Hedenström, E. (2012). Novel foamed materials from renewable sources. In 9th European Conference on Foams, Emulsions and Applications.

Ibrahem, I. , Afewerki, S. , Breistein, P. & Córdova, A. (2012). One-pot three-component catalytic asymmetric synthesis of homoallylboronates. In ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY. Vol 243. (ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY). pp. 889-INOR-

Örtegren, J. , Öhlund, T. , Niga, P. , Makeen, K. , Andersson, H. & Nilsson, H. (2012). Print quality issues concerning inkjet printing of colour and electronics on paper. In PTS Symposium: Paper and Imaging 2012. Munich, Germany : . pp. 251--263.

Andres, B. (2012). Supercapacitors with graphene coated paper electrodes. Paper presented at the International Paper Physics Conference & 8th International Paper and Coating Chemistry Symposium, Stockholm, Sweden, 10-14 june, 2012

Göransson, K. , Söderlind, U. & Zhang, W. (2012). Tar/CH4 Reforming by Catalytic Bed Materials in a Biomass Fluidised Bed Gasifier. In 20th European Biomass Conference & Exhibition : Proceedings of the International Confernce held in Milano, Italy, 18 - 22 June 2012.

Engberg, B. & Berg, J. (2011). A comparative study of models describing high consistency refining. In Proceedings of International Mechanical Pulping Conference.. pp. 96--100.

Hellström, L. , Carlberg, T. , Engstrand, P. , Gradin, P. & Gregersen, Ø. (2011). Collimated chipping technology in order to reduce the energy consumption in mechanical pulping. In Proceeding for International Mechanical Pulping Conference, Xi'an, P.R. of China.. pp. 457--460.

Norgren, S. & Höglund, H. (2011). Consolidation of fibre-fibre bonds in TMP and CTMP based papers. In PROCEEDING OF INTERNATIONAL MECHANICAL PULPING CONFERENCE 2011.. pp. 448--453.

Salmi, A. , Salminen, L. I. , Montonen, R. , Engberg, B. A. , Björkqvist, T. , Haeggström, E. & Lucander, M. (2011). Cyclic impacting of wood results in localized fatigue. In Proceedings of International Mechanical Pulping Conference 2011 (Xi'an, China 2011).

Salminen, L. , Salmi, A. , Engberg, B. A. , Björkqvist, T. , Haeggström, E. & Lucander, M. (2011). Cyclic loading and fatigue of wood. In Progress in Paper Physics Seminar2011 : Conference Proceedings.. pp. 243--245.  

Walter, K. , Paulsson, M. , Hellström, P. & Nilsson, P. (2011). Energy efficient production of TMP by using acid hydrogen peroxide: Factors affecting the hydrogen peroxide consumption. In Proceedings of International Mechanical Pulping Conference 2011.. pp. 484--487.

Hammarling, K. , Zhang, R. , Manuilskiy, A. & Nilsson, H. (2011). FBG based upon evaporated Silica nano particles. In 1st EOS Topical Meetingon On Micro- and Nano-Optoelectronic Systems, Bremen, December 7-9, 2011.

Engstrand, P. (2011). FILLING THE GAP – IMPROVED ENERGYEFFICIENCY AND QUALITY STABILITYIN MECHANICAL PULP REFINING. Paper presented at the International Mechanical Pulping Conference 2011, Xian China

Logenius, L. , Engstrand, P. , Karlström, A. & Paulsson, M. (2011). Improved hydrogen peroxide bleaching of mechanical pulps using carbon dioxide in combination with sodium and magnesium based alkali sources. In 16th International Symposium on Wood, Fiber and Pulping Chemistry - Proceedings, ISWFPC.. pp. 741--745.

Gradin, P. , Berg, J. , Gulliksson, M. & Nyström, S. (2011). Measuring forces in a refiner plate gap. In Proceedings of International Mechanical Pulping Conference.. pp. 81--83.

Uesaka, T. (2011). Mechanics and Physics of Wet Fibre Network. In Fundamental and Applied Pulp and Paper Modelling Symposium.

Holmvall, M. , Drolet, F. , Uesaka, T. & Lindström, S. (2011). Micro-fluidics in printing nip - Liquid transfer on random fibre network surface. In Progress in Paper Physics Seminar. Graz, Austria :

Wiklund, H. & Uesaka, T. (2011). Micro-fluidics of "water bond". In Progress in Paper Physics Seminar. Graz, Austria :

Nelsson, E. , Hildén, L. , Sandberg, C. , Fernando, D. & Daniel, G. (2011). Mill scale experiences of combined sulphite pre-treatment and high intensity refining of spruce. Paper presented at the International mechanical pulping conference

Sandberg, C. , Sundström, L. , Andersson, S. & Nelsson, E. (2011). New TMP-line improves pulp quality and reduces energy consumption. Paper presented at the International mechanical pulping conference

Fjellström, H. , Engstrand, P. , Granfeldt, T. & Logenius, L. (2011). Predicting CTMP bleachability using wood shavings. In 16th International Symposium on Wood, Fiber and Pulping Chemistry - Proceedings, ISWFPC.. pp. 613--616.    

Zasadowski, D. , Andersson, F. , Edlund, H. , Almesåker, A. , Hedenström, E. & Norgren, M. (2011). Removal of dissolved and colloidal substances from mechanical pulping white waters by flotation. In 16th International Symposium on Wood, Fiber and Pulping Chemistry - Proceedings, ISWFPC. Tianjin : . pp. 1238--1242.

Högberg, I. , Zasadowski, D. , Karlsson, A. , Wikman, B. , Andersson, F. , Hedenström, E. , Edlund, H. & Norgren, M. (2011). Use of chelating surfactants as complexing agents for removal of manganese from mechanical pulp fibres prior to hydrogen peroxide bleaching.. In 16th International Symposium on Wood, Fiber and Pulping Chemistry - Proceedings, ISWFPC. Tianjin : . pp. 682--686.

Zhang, R. , Hummelgård, M. & Olin, H. (2010). Carbon nanocages templated by gold nanostructures. In Vacuum Electron Sources Conference and Nanocarbon (IVESC), 2010 8th International.. pp. 469--469.  

Muhic, D. , Huhtanen, J. , Sundström, L. , Sandberg, C. , Ullmar, M. & Engstrand, P. (2010). Energy efficiency in double disc chip refining. Influence of intensity by segment design. In Proceedings of the 7th InternationalFundamental Mechanical Pulp Research Seminar, Nanjing, China (2010).. pp. 103--111.

Andersson, H. , Öhlund, T. , Manuilskiy, A. , Forsberg, S. , Örtegren, J. & Nilsson, H. (2010). Evaluation of InkAid surface treatment to enhance print quality of ANP silver nano-particle ink on plastic substrates. In Large Area, Organic & Printed Electronics (LOPE-C) 2010. Frankfurt : . pp. 241--245.

Johnsen, I. , Narvestad, H. , Axelsson, P. , Enberg, S. , Asarød, K. & Kure, K. (2010). Metal induced brightness loss of peroxide bleached TMP. In Proceedings.

Hedenström, E. , Högberg, H. , Anderbrant, O. , Wang, H. , Zhang, Z. & Chen, G. (2010). Sex pheromone for monitoring flight periods and population densities of the pine sawfly, Diprion jingyuanensis Xiao et Zhang (Hym.: Diprionidae). In Forests for the Future - Sustaining Society and the Environment : Abstracts. (International forestry review). pp. 369--369.

Kulachenko, A. & Uesaka, T. (2010). Simulation of Wet Fibre Network Deformation. Paper presented at the Progress in Paper Physics Seminar

Vidal, D. & Uesaka, T. (2010). Smoothed Dissipative Particle Dynamics Model for Predicting Self-Assembled Nano-Cellulose Fibre Structures. In 2010 Tappi International Conference on Nanotechnology for the Forest Product Industry.

Göransson, K. , Söderlind, U. & Zhang, W. (2010). TAR/CH4 REFORMING BY CATALYTICALLY ACTIVE MATERIALS IN A BIOMASS DUAL FLUIDISED BED GASIFIER . In The second International Symposium on Gasification and Its Application (ISGA 2010), December 5-8, Fukuoka, Japan.

Hellström, L. & Engstrand, P. (2010). The effect on the energy consumption in mechanical pulping of different wood chipping conditions. In Proceedings of 7th International Seminar of Fundamental Mechanical Pulp Research (IFMPRS 2010).. pp. 124--126.

Öhlund, T. , Örtegren, J. , Andersson, H. & Nilsson, H. (2010). The importance of surface characteristics for structure definition of silver nanoparticle ink patterns on paper surfaces. In NIP26 and Digital Fabrication. Austin : . pp. 309--313.

Högberg, I. , Andersson, F. , Hedenström, E. , Norgren, M. & Edlund, H. (2010). The Interaction Parameter in Binary Surfactant Mixtures of a Chelating Surfactant and a Foaming Agent.. In TRENDS IN COLLOID AND INTERFACE SCIENCE XXIV. Berlin : (Progress in Colloid and Polymer Science). pp. 17--20.  

Córdova, A. , Ibrahem, I. , Afewerki, S. , Breistein, P. , Deiana, L. , Zhao, G. , Dziedzic, P. , Pirttilä, K. & et al. (2010). TOC-Trends in Organic Chemistry : Selective Catalysis.

Hellström, L. M. , Gradin, P. A. & Carlberg, T. (2009). A device for studying wood chipping under realistic conditions. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009. (SPCI meddelande). pp. 252--254.

Reyier, S. , Ferritsius, O. & Ferritsius, R. (2009). BIN - A method to measure the distribution of fiber bonding ability. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 292--297.

Björkqvist, O. , Engstrand, P. & Fridén, H. (2009). Concepts of Steam Recovery from LC-Refining by Increase Temperature. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 190--194.  

Walter, K. , Paulsson, M. & Wackerberg, E. (2009). Energy-efficient refining of Black spruce TMP using acid hydrogen peroxide. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009. Stockholm : . pp. 286--291.

Lindström, S. , Uesaka, T. & Hirn, U. (2009). Evolution of the paper structure along the length of a twin-wire former. In ADVANCES IN PULP AND PAPER RESEARCH, OXFORD 2009, VOLS 1-3. Bury, UK : . pp. 207--245.

Berg, J. & Gradin, P. A. (2009). Fibre wall crack development. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009. (SPCI meddelande). pp. 340--343.

Muhic, D. , Sundström, L. , Nilsson, L. , Sandberg, C. , Ullmar, M. , Backlund, U. & Engstrand, P. (2009). Influence of temperature on energy efficiency in double disc chip refining. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 344--347.

Andersson, K. I. , Norgren, M. & Eriksson, M. (2009). Lignin removal from wastewater by adsorption. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 280--285.

Nordin, L. , O'Nils, M. , Engstrand, P. , Bäck, R. , Ferritsius, O. & Sandberg, C. (2009). Measurement and prediction of dewatering characteristics for mechanical pulps using optical fibre analyzers. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 309--316.

Lindström, S. , Kulachenko, A. & Uesaka, T. (2009). New insights in paper forming from particle-level process simulations. In Papermaking Research Symposium 2009. Kuopio, Finland : . pp. 38-

Engberg, B. A. , Salminen, L. I. , Salmi, A. & Björkqvist, T. (2009). On the importance of fatigue for the rheological properties of wood. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 239--244.

Edvardsson, S. & Uesaka, T. (2009). Papermaking Research symposium (PRS) : Web tension variations and runnability of the open draw section. In PRS 2009 Papermaking Research Symposium. Kuopio :

Uesaka, T. (2009). Particle-level Simulation in Paper Science. In Hannu Paulapuro Symposium. Helsinki, Finland : . pp. 54--60.

Göransson, K. , Söderlind, U. & Zhang, W. (2009). Preliminary Test on the Allothermal Gasifier at Mid Sweden University. In 17th European Biomass Conference : FROM RESEARCH TO INDUSTRY AND MARKETS. Florence, Italy :

Gorski, D. , Engstrand, P. , Hill, J. & Johansson, L. (2009). Review: Reduction of energy consumption in refining through mechanical pretreatment of wood chips. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 17--21.

Öhlund, T. , Örtegren, J. , Andersson, H. & Nilsson, H. (2009). Sintering Methods for Metal Nanoparticle Inks on Flexible Substrates. In NIP 25: DIGITAL FABRICATION 2009, TECHNICAL PROGRAM AND PROCEEDINGS.. pp. 614--617.

Saari, V. , Björkqvist, T. & Engberg, B. A. (2009). Strain distribution in annual rings under compression by high speed photography. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 245--251.

Kulachenko, A. , Lindström, S. & Uesaka, T. (2009). Strength of wet fiber networks-Strength scaling. In Papermaking Research Symposium 2009. Kuopio : . pp. 35-

Edvardsson, S. & Uesaka, T. (2009). System stability of the open draw section and paper machine runnability. In ADVANCES IN PULP AND PAPER RESEARCH, OXFORD 2009, VOLS 1-3.. pp. 557--575.

Enberg, S. , Paulsson, M. , Rundlöf, M. , Johnsen, I. A. & Axelsson, P. (2009). The influence of process conditions during pulp storage on the optical properties of Norway spruce high-yield pulps. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 117--121.

Ferritsius, O. , Ferritsius, R. & Reyier, S. (2009). The influence of process design on the distribution of fundamental fibre parameters. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 160--168.

Norgren, S. & Gradin, P. (2009). Using acoustic emission monitoring to evaluate the through the thickness and in plane strength properties. In Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009.. pp. 298--303.

Yu, C. , Zhang, W. & Cen, K. (2008). A modelling study on cellulose particle pyrolysis under fluidized-bed conditions.. In Progress in thermochemical biomass conversion : [based on papers delivered to the Fifth International Conference on Thermochemical Biomass Conversion]. Oxford : . pp. 1091--1106.  

Hellström, L. M. , Gradin, P. A. & Carlberg, T. (2008). A Study of Fracture processes in Wood Chipping. In 6th Fundamental Mechanical Pulp Research Seminar. Espoo :

Dahlström, C. , Uesaka, T. & Norgren, M. (2008). Base Sheet Structures that Control Coating Uniformity: Effects of Length Scale. In TAPPI Advanced Coating Fundamentals Symposium Proceedings.. pp. 124--133.

Malmgren, C. , Olin, H. , Bäckström, J. , Cornell, A. , Hummelgård, M. & Eriksson, S. (2008). Behavioural effects of production parameters on DSA®. : . In 59:th Annual Meeting of the International Society of Electrochemistry, Sevilla, Spain, 7-12 September 2008..

Göransson, K. , Söderlind, U. & Zhang, W. (2008). BTL laboratory at Mid Sweden University. In 16th European Biomass Conference. Florence : . pp. 1041--1045.  

Nordin, L. , O'Nils, M. , Engstrand, P. & Sundvall, Ö. (2008). Characterization and classification of dewatering measurement techniques for mechanical pulps. In Proceedings of the PRS, Finland, May 2008..

Lindström, S. & Uesaka, T. (2008). Effects of interparticle friction on the rheology of fibre suspensions. In 5th European Congress on Computational Methods in Applied Sciences and Engineering : TS318, Computational Materials Mechanics V.

Norgren, S. , Gradin, P. , Nyström, S. & Gulliksson, M. (2008). Investigation of the Z-direction strength properties of paper by use of acoustic emission monitoring. In 28th European conferance on acoustic emission testing.. pp. 238--243.

Halvarsson, S. , Norgren, M. & Edlund, H. (2008). Manufacturing of Non-Resin Wheat Straw MDF/HDF.

Yu, C. & Zhang, W. (2008). Modeling potassium release in biomass pyrolysis. In Progress in thermochemical biomass conversion : [based on papers delivered to the Fifth International Conference on Thermochemical Biomass Conversion]. Oxford : . pp. 1107--1115.  

Uesaka, T. (2008). Modelling and simulation of paper structures and paper properties. In SECOND INTERNATIONAL PAPERMAKING AND ENVIRONMENT CONFERENCE, PROCEEDING, BOOKS A AND B.. pp. 103--109.

Malmgren, C. , Hummelgård, M. , Bäckström, J. , Cornell, A. & Olin, H. (2008). Nanoscale characterisation of crystallinity in DSA coating. In PROCEEDINGS OF THE 17TH INTERNATIONAL VACUUM CONGRESS/13TH INTERNATIONAL CONFERENCE ON SURFACE SCIENCE/INTERNATIONAL CONFERENCE ON NANOSCIENCE AND TECHNOLOGY. (Journal of Physics Conference Series). pp. 4--4.  

Kulachenko, A. , Uesaka, T. & Lindström, S. (2008). Reinventing mechanics of fibre network. In Progress in Paper Physics Seminar. Helsinki : . pp. 185--193.

Lindström, S. & Uesaka, T. (2008). Simulation of paper structure development in a roll-blade former. In Progress in Paper Physics Seminar. Espoo : . pp. 139--141.

Gradin, P. , Graham, D. , Nygård, P. & Vallen, H. (2008). The use of acoustic emission monitoring to rank paper materials with respect to their fracture toughness. In Proceedings of the Society for Experimental Mechanics, Inc... pp. 133--137.

Nordin, L. , O´Nils, M. , Engstrand, P. & Sundvall, Ö. (2008). Towards relevant dewatering measurement techniques : Caracterisation and classification of dewatering measurement techniques for mechanical pulps. In FMPRS May 2008.

Lindström, S. & Uesaka, T. (2007). A model for flexible fibres in viscous and inert fluid. In 61st Appita annual conference and exhibition, Gold Coast, Australia, 6-9 May 2007, 2007 International paper physics conference, 6pp [Carlton, Australia: Appita, 2007.. pp. 23--28.

Isaksson, P. , Gradin, P. & Östlund, S. (2007). A simplified treatise of the Scott bond testing method. In Proceedings of the 2007 International Paper Physics Conference, May 6-11, 2007, Gold Coast, Qld, Australia, 1-6, 2007.

Åström, M. , Karlsson, K. , Hummelgård, M. & Olin, H. (2007). Building a Scanning Tunneling Microscope : A Continuing Project in an Engineering Physics Program (poster). In Proceedings of CONASTA 56 and ICASE 2007 World Conference on Science and Technology Education, 8 – 12 July 2007 The Sheraton Hotel and Mercedes College, Perth, Western Australia.. pp. 113--114.

Ferritsius, O. & Rautio, M. (2007). Differences on fibre level between GW and TMP for magazine grades. In International Mechanical Pulping Conference 2007, TAPPI.. pp. 87--96.

Klinga, N. , Höglund, H. & Sandberg, C. (2007). Energy efficient high quality CTMP for paperboard. In International Mechanical Pulping Conference 2007, TAPPI.. pp. 370--380.

Sjöberg, J. & Höglund, H. (2007). High consistency refining of kraft pulp for reinforcing paper based on TMP furnishes. In International Mechanical Pulping Conference 2007, TAPPI.. pp. 943--953.

Hummelgård, M. , Olin, H. , Vengust, D. , Dvorsek, D. & Mihalovic, D. (2007). High current density observed in Mo6S3I6 nanowires by in-situ probing. In International Conference on Nano Science and Technology 2007 (ICN+T 2007), July 2-6, Stockholm.

Svensson, B. A. , Holmgren, S. , Gradin, P. A. & Höglund, H. (2007). High Strain Rate Compression and Sliding Friction of Wood under Refining Conditions. In International Mechanical Pulping Conference 2007, TAPPI.. pp. 983--994.

Logenius, L. , Agnemo, R. & Höglund, H. (2007). High-Temperature Bleaching of Mechanical Pulps from Spruce. In Proceedings. Internationl mechanical pulping conference 6-9 May, 2007, Minneapolis, MN, USA.. pp. 580--587.

Nafari, A. , Svensson, K. , Olin, H. & Enoksson, P. (2007). In-situ AFM and nanoindenter measurements. In International Conference on Nano Science and Technology 2007, July, Stockholm.

Olin, H. (2007). In-situ probing, programmed assembly, and spin-off companies. In 2nd DESYGN-IT Nanotube Workshop 2007 : University of London 23 nov 2007.

Olin, H. , Hummelgård, M. , Svensson, K. , Nafari, A. , Olsson, E. & Enoksson, P. (2007). In-situ TEM probing. In International Conference on Nano Science and Technology 2007, July, Stockholm.

Nafari, A. , Karlen, D. , Rusu, C. , Svensson, K. , Olin, H. & Enoksson, P. (2007). MEMS Sensor for in-situ TEM Atomic Force microscopy. In Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS).. pp. 103--106.  

Norgren, S. & Höglund, H. (2007). Moisture-Induced Surface Roughness in TMP Sheets.. In International Mechanical Pulping Conference 2007, TAPPI.. pp. 718--729.

Uesaka, T. (2007). Prediction of Low Tail of Strength Distribution of Paper. In Proceedings of the 2007 International Paper Physics Conference.. pp. 115--122.

Olin, H. , Hummelgård, M. , Nafari, A. , Svensson, K. , Olsson, E. & Enoksson, P. (2007). Project based nano-education : first years students building scanning tunnelling microscopes. In International conference on Nano Science and technology (ICN + T 2007) July 2-6, 2007 Stockholm, Sweden.

Hellström, L. , Gradin, P. & Carlberg, T. (2007). Strain Distribution in Wood During Chipping. In International Mechanical Pulping Conference 2007, TAPPI.. pp. 251--255.

Holmvall, M. & Uesaka, T. (2007). Striping of Corrugated Board in Halftone Flexo Post-printing. In 61st Appita annual conference and exhibition, Gold Coast, Australia, 6-9 May 2007, 2007 International paper physics conference, 6pp.

Olsen, M. , Olin, H. & Hummelgård, M. (2007). Surface modifications by van der Waals forces. In International Conference on Nano Science and Technology 2007, July 2-6, Stockholm.

Kulachenko, A. & Uesaka, T. (2007). The Effects of Fibre Orientation Streaks on out-of-Plane Instability of Paper. In Proceedings of the 2007 International Paper Physics Conference.. pp. 255--260.

Malmgren, C. , Bäckström, J. & Olin, H. (2007). Towards nanopatterned DSA.

Sikter, D. , Karlström, A. , Engstrand, P. & Czmaidalka, J. (2007). Using the refining zone temperature profile for quality control. In International Mechanical Pulping Conference 2007, TAPPI. Atlanta, GA : . pp. 894--902.

Reyier, S. , Ferritsius, O. & Shagaev, O. (2007). Ways to measure the bonding ability distribution of fibers in mechanical pulps. In International Mechanical Pulping Conference 2007, TAPPI.. pp. 97--111.

Högberg, B. , Olsen, M. & Olin, H. (2006). A Method for Automated Tile Systems Design. In Foundations of Nanoscience 2006: Self-Assembled Architectures and Devices.

Fjellström, H. , Höglund, H. , Paulsson, M. & Forsberg, S. (2006). A novel method for studying the photo-stabilising properties of coating layers. Paper presented at the 5th Fundamental Mechanical Pulp Reserch Seminar (FMPRS),Trondheim, Norway, 31 May-1 June 2006

Zhang, W. (2006). A review on biofuels for transportation. In Asia Biofuels Conference & Expo IV, 2006, Beijing..

Kulachenko, A. , Gradin, P. A. & Uesaka, T. (2006). Basic mechanisms of fluting. In 92nd Annual Meeting Preprints-Book A, 7 Feb. 2006 , Canada. Que., Canada : . pp. 161--173.

Logenius, L. , Angemo, R. & Höglund, H. (2006). High temperature Peroxide Bleaching of TMP from Spruce. In 5th Fundamental Mechanical Pulping Reasearch Seminar, 31 May- 1 June, 2006, Trondheim, Norway.

Nafari, A. , Larsson, M. , Rusu, C. , Enoksson, P. & Olin, H. (2006). In situ TEM-nanoindentation using MEMS force sensor. In MEMS06.

Olsson, E. , de Knoop, L. , Olin, H. , Pettersson, H. & Svensson, K. (2006). In-situ Characterization of Charge and Mass Transport using a combined STM and TEM. In 16th International microscopy congress, Sapporo, Japan 2006.

Holmvall, M. & Uesaka, T. (2006). Nip Mechanics of Flexo Post-Printing on Corrugated Board. In Euromech Colloquium 486.

Åström, M. , Hummelgård, M. , Olin, H. & Karlsson, K. G. (2006). Project as a way to integrate science at university level. In Third Scandinavian Symposium on research in science education.

Holmvall, M. & Uesaka, T. (2006). Striping of Corrugated Board in Flexo Post-Printing. In International Printing and Graphic Arts Conference proceedings 2006.

Lindström, S. & Uesaka, T. (2006). Suspensions of flexible fibres in flows of decaying turbulence. In Euromech. Sundsvall :

Högberg, B. & Olin, H. (2006). Towards a Technology for Anisotropically Functionalized Nanoparticle Dimers. In Foundations of Nanoscience: Self-Assembled Architectures and Devices.. pp. 298-

Zhang, W. & Söderlind, U. (2005). A review on transportation fuels from biomass syngas : 7th World Congress on Recovery, Recycling and Reintegration, Beijing.

Drolet, F. & Uesaka, T. (2005). A Stochastic Structure Model for Predicting sheet Consolidation and Print Uniformity. In 13th fundamental research symposium, Cambridge, 11-16 sept. 2005.. pp. 1139--1154.

Wärja, M. & Björkqvist, O. (2005). A Systems Approach to Maintenance and Renewal Strategies. In CIRED 2005.

Forsman, B. & Zhang, W. (2005). Alkali Metal Release During Rapid Pyrolysis of Fuel Blends Containing . In Proceedings. 14th European conference and technology exhibition biomass for energy industry and climate protection, Paris, Oct. 2005.

Forsman, B. , Zhang, W. , Svenson, J. & Pettersson, J. (2005). ALKALI METAL RELEASE DURING RAPID PYROLYSIS OF FUEL BLENDS CONTAINING BIOMASS AND DIFFERENT ADDITIVES.. In Proceedings of the 14th European Biomass Conference : Biomass for Energy, Industry and Climate Protection.

Zhang, W. , Forsman, B. & Söderlind, U. (2005). Biofuels in Sweden. In Proceedings of the 7th World Congress on Recovery Recycling and Reintegration.

Högberg, B. & Olin, H. (2005). Comparison between unique addressing and programmable self-assembly. In Foundations of Nanoscience : Self-Assembled Architectures and Devices : [conference proceedings]... pp. 37--41.

Branström, J. , Norgren, S. , Sandström, P. , Ruel, K. & Höglund, H. (2005). Compression wood in knots and the effect on surface roughness.. In proceedings from IMPC 2005.

Uesaka, T. (2005). Computational Modelling of Stochastic Paper Structures and Its Application to Paper Material Design. In Proc. International Symposium of Wood Science and Technology.

Högberg, B. , Helmersson, J. , Holm, S. & Olin, H. (2005). DNA Coated Nanoparticle eight-mers as Programmable Self-Assembly Building Blocks. In Foundations of nanoscience (FNANO05) : Self-assembled architectures and devices.. pp. 219--226.

Högberg, B. , Helmersson, J. & Olin, H. (2005). DNA-Coated Nanoparticles for Programmable Self-Assembly Building-Blocks : Euchem Nano 2005 - Nanoscale Surface Self-Assembly.

Vesterlind, E. & Höglund, H. (2005). High Temperature Birch CTMP. In Proceedings. SPCI International Conference 2005, Stockholm, Sweden, June 14-16.

Logenius, L. , Agnemo, R. & Höglund, H. (2005). High temperature bleaching of mechanical pulps from spruce. In Proceedings, International Mechanical Pulping Conference, 7-9 June, 2005, Oslo, Norway.. pp. 80--84.

Fjellström, H. , Höglund, H. , Paulsson, M. & Forsberg, S. (2005). Influence of coating formulation on light-induced brightness stability of mechanical and chemimechanical pulp sheets. In International Mechanical Pulping Conference: IMPC 2005, Oslo, Norway, 7-9 June 2005.. pp. 339--343.

Norgren, S. & Höglund, H. (2005). Irreversible long fibre collapse at high temperature reject refining in a TMP system : Effects on fibre and surface properties. In Proceedings International Mechanical Pulping Conference Oslo 2005.. pp. 163--168.

Olsson, E. , de Knoop, L. , Olin, H. , Pettersson, H. & Svensson, K. (2005). Local Probing of Electron Transport Properties and Structure of Nanostructures Using TEM and TEM-STM.

Vesterlind, E. , Höglund, H. , Kolar, M. & Bergström, J. (2005). Low Energy Birch CTMP in Bulky Paper Products. In Proceedings. International Mechanical Pulping Conference 2005, Oslo, Norway..

Deng, N. , Ferahi, M. & Uesaka, T. (2005). Pressroom runnability : comprehensive analyses of pressroom and mill databases. In Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC) : Book C.. pp. C217--228.

Halvarsson, S. , Norgren, M. & Edlund, H. (2005). Processing of Wheat Straw Materials for Production of Medium Density Fiberboard (MDF) . In 59th Appita Annual Conference, Aukland, New Zealand 16-19 May 2005. Brunswick East Victoria 3057, Australia : . pp. 623--629.

Klinga, N. , Sandberg, C. & Höglund, H. (2005). Sheet properties of high yield pulps related to different pressing and drying conditions - part I. In International Mechanical Pulping Conference : IMPC 2005, Oslo, Norway, 7-9 June 2005. Oslo : . pp. 344--348.

Svensson, B. , Rundlöf, M. & Höglund, H. (2005). Sliding friction between wood and steel in a saturated steam environment. In International Mechanical Pulping Conference: IMPC 2005 : Oslo, Norway, 7-9 June 2005.. pp. 31--37.

Lindström, S. & Uesaka, T. (2005). Stochastic Modelling of Paper Structure. Effects of Forming Section. In Proceedings, 5th Biennal Johan Gullichsen Colloquium, Helsinki, 17. Nov. 2005. Helsinki : . pp. 25--35.

Kulachenko, A. , Gradin, P. & Uesaka, T. (2005). Tension wrinkling and fluting in heatset web offset printing process : post buckling analysis. In Advances in Paper Science and Technology : Transactions of the 13th fundamental research symposium, Vols 1-3.. pp. 1075--1099.

Kulachenko, A. , Gradin, P. & Uesaka, T. (2005). The effect of local moisture variations on fluting in heatset web offset printing. In Proc. of 5th Biennial Johan Gullichsen Colloquium.

Logenius, L. , Friman, L. & Agnemo, R. (2005). The influence of high temperature on the ageing of cellulose impregnated with metal chlorides under dry and moist conditions.. In Proceedings, 13th International Symposium on Wood, Fibre and Pulping Chemistry, 16-19 May, Auckland, New Zealand.. pp. 243--249.

Svensson, K. , Olin, H. & Olsson, E. (2005). Using carbon nanotubes as nanopipettes for transport of solid material. In Nanotube '05.

Gradin, P. A. , Isaksson, P. , Nyström, S. K. , Graham, D. , Kao, D. & Knight, B. (2004). Acoustic Emission applied to mechanically loaded Paper. In EWGAE (European Working Group on Acoustic Emission) 2004 proceedings.. pp. 423--431.

Norgren, M. , Mackin, S. & Edlund, H. (2004). Different aggregations processes during kraft lignin aggregation.. In Eighth European Workshop on lignocellulosics and pulp : utilization of lignocellulosics and by-products of pulping ; August 22-25,2004 ; proceedings. : Workshop on Lignocellulosics and Pulp (EWLP) ; 8 (Riga) : 2004.08.22-25. Riga : . pp. 562-

Zhang, W. , Dai, X. , Söderlind, U. & Wu, C. (2004). Further test on the Sanya 6MW biomass CFB gasifier. In 2nd World Conference and Exhibition on Biomass for Energy, Industry and Climate Protection. Rome, Italy, 10 - 14 May 2004.

Sjöberg, J. & Höglund, H. (2004). Highly extensible kraft pulp fibres : The 2004 Progress in Paper Physics Seminar.

Logenius, L. , Höglund, H. & Agnemo, R. (2004). Impact of temperature profile on the brightness of spruce wood. In 4th Fundamental Mechanical Pulping Research Seminar, 7-8 June, 2004, Stockholm, Sweden.

Pokropivny, A. , Lohmus, A. , Lohmus, R. , Erts, D. , Pokropivny, V. & Olin, H. (2004). In situ transformations of gold contacts studied by molecular dynamics simulations. In Nanotech 2004, Vol. 3 : Technical proceedings of the 2004 NSTI Nanotechnology conference and trade show.. pp. 561-

Svensson, K. , Olin, H. & Olsson, M. (2004). Local Probing of Electron Transport Mechanisms in Carbon Nanotubes Using a Scanning Tunneling Microscope in the Transmission Electron Microscope.

Halvarsson, S. , Norgren, M. & Edlund, H. (2004). Manufacturing of fiber composite Medium Density Fiberboard (MDF) based on annual plant fiber and Urea Formaldehyde Resin. In Proceedings of ICECFOP1: 1st International Conference on Environmentally-Compatible Forest Products.. pp. 131--147.

Torgnysdotter, A. , Kulachenko, A. , Gradin, P. & Wågberg, P. (2004). Modification of the Contact Zone to Control the Physical Behaviour of Paper - A Model Experiment : Pappersfysik konferens i Trondheim ?.

Persson, G. , Edlund, H. & Lindblom, G. (2004). Phase behaviour of the 1-monooleoyl-rac-glycerol/n-octyl-beta-D-glucoside/water system. In TRENDS IN COLLOID AND INTERFACE SCIENCE XVI. (PROGRESS IN COLLOID AND POLYMER SCIENCE). pp. 36--39.  

Wärja, M. & Björkqvist, O. (2004). Reliability Based Approach to Maintenance and Renewal Strategies. In Proceedings of PowerCon 2004.

Erts, D. , Polyakov, B. , Saks, E. , Olin, H. , Ziegler, K. & Holmes, J. (2004). Semiconducting nanowires : properties and architectures. In FUNCTIONAL NANOMATERIALS FOR OPTOELECTRONICS AND OTHER APPLICATIONS. (SOLID STATE PHENOMENA). pp. 109--115.

Zhang, W. (2004). TRANSPORTATION FUELS FROM BIOMASS VIA GASIFICATION : 2nd World Conference and Exhibition on Biomass for Energy and Industry, May 2004, Rome, Italy.

Svensson, B. (2004). Tribology under refining conditions. In Proceedings of the 4th Fundamental Mechanical Pulp Seminar : June 7-8, 2004, Stocholm, Sweden.

Wärja, M. & Björkqvist, O. (2004). Variety Reduction Model for Maintenance and Renewal Strategies. In Proceedings of NORDAC 2004.

Isaksson, P. , Hägglund, R. & Gradin, P. (2003). A continuum damage elastic-plastic model for packaging paper. In 2003 International Paper Physics Conference. Proceedings.. pp. 207--210.

Batchelor, W. J. , Westerlind, B. , Hägglund, R. & Gradin, P. A. (2003). Effect of test conditions on measured loads and displacements in zero and short span testing. Paper presented at the International Paper Physics Conference, Proceedings

Sjöberg, J. , Höglund, H. & Andreasson, B. (2003). Highly Extensible Kraft Pulp Fibres. In 5th International Paper and Coating Chemistry Symposium 2003 : Montreal,Canada,June 16-19 2003.

Norgren, S. & Höglund, H. (2003). Irreversible long fibre collapse at high temperure reject refining in at TMP system - Initial studies.. In Proceedings from IMPC 2003, Quebec city.

Norman, F. & Höglund, H. (2003). Moisture-induced surface roughness in TMP-based paper - The influence of fiber cross-section dimensions : IMPC 2003.

Nygren, O. , Höglund, H. & Roland, B. (2003). On characterization of mechanical and chemimechanical pulps. In International Mechanical Pulping conference, Quebec, Que, Canada, 2-5 June 2003,. Montreal : . pp. 486-

Backlund, H. , Höglund, H. & Gradin, P. (2003). Study of tangential forces and temperature profiles in commercial refiners. In 2003 International Mechanical Pulping Conference.. pp. 379--388.

Lindström, M. , Hedenström, E. & Högberg, H. E. (2003). Synthesis of nucleoside analogs : Meeting abstract. In ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY. (ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY)

Svensson, B. , Nyström, S. K. , Gradin, P. , Bergfors, E. & Höglund, H. (2003). Tribology under refining conditions : initial studies sevo motor. In 2003 International Mechanical Pulping Conference.. pp. 233--237.

Zhang, W. , Dai, X. , Söderlind, U. , Wu, C. & Luo, X. (2002). A PRELIMINARY TEST ON AN INDUSTRIAL BIOMASS CFB GASIFIER . In 12th European Biomass Conference : Vol. 1.. pp. 745--748.

Edlund, H. & Norgren, M. (2002). Different Types of Aggregation and Aggregate Structures in Aqueous Kraft Lignin Solutions. . In Proceedings. 7th EWLP.. pp. 297--300.

Edlund, H. & Norgren, M. (2002). Ion Specific Differences in Salt Induced Precipitation of Kraft Lignin. In Proceedings 7th EWLP, Turku, Finland, Aug 26–29, 2002.. pp. 75--78.

Zhang, W. , Yu, C. , Tabikh, A. , Dai, X. , Söderlind, U. , Adanes, J. , de Diego, L. , García-Labiano, F. & et al. (2002). Process simulation of circulating fluidized beds with combustion/gasification of biomass.. In Twelfth European Biomass Conference - Biomass for Energy, Industry and Climate Protection : European Conference on Biomass for Energy, Industry and Climate Protection 12, 2002, Amsterdam>. Florence : . pp. 1503-

Möller, K. , Nikko, A. & Engstrand, P. (2002). The effect of multiple recycling on newsprint quality : a large-scale pilot study, performed 1992 -1996. In PTS-CTP Symposium on Deinking Technology, 22-24 April 2002 Munich Germany.

Berglund, P. , Christiernin, M. & Hedenström, E. (2001). Enantiorecognition of Chiral Acids by Candida rugosa Lipase : Two Substrate Binding Modes Evidenced in an Organic Medium. In Applied Biocatalysis in Speciality Chemicals and Pharmaceuticals. (ACS Symposium Series). pp. 263--273.

Lyytikäinen-Saarenmaa, P. , Varama, M. , Anderbrant, O. , Kukkola, M. , Hedenström, E. & Högberg, H. (2001). Predicting Pine Sawfly Population Densities and Subsequent Defolation with Pheromone Traps. In Integrated management and dynamics of forest defoliating insects. (Forest Service General Technical Report Northeastern Forest Experimental Station). pp. 108--116.

Lyytikäinen-Saarenmaa, P. , Varama, M. , Anderbrant, O. , Kukkola, M. , Hedenström, E. & Högberg, H. (2001). Predicting pine sawfly population densities and subsequent defoliation with pheromone traps. In Proceedings. Integrated management and dynamics of forest defoliating insects, Victoria, Canada, 15-19 August 1999. (USDA Forest Service Northeastern Research Station General Technical Report). pp. 108--116.

Zhang, W. , Johnsson, F. , Johnsson, H. & Leckner, B. (2001). Time-dependent fluctuation characteristics of particle flow in a circulating fluidized bed boiler. In Fluidization X : proceedings of the Tenth Engineering Foundation Conference on Fluidization, Beijing, People Republic of China, May 20 - 25, 2001 : Conference on Fluidization <10, 2001, Beijing>. New York : . pp. 818-

Yu, C. , Zhang, W. & Cen, K. (2000). A study on kinetic model for cellulose pyrolysis modeling. In Renewable energy : renewables, the energy for the 21st century : Part II.. pp. 1369--1372.

Berglund, P. , Hedenström, E. & Hult, K. (2000). Controlling lipase enantioselectivity for organic synthesis : Meeting abstract. In ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY. (ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY). pp. U219-

Yu, C. , Zhang, W. & Cen, K. (2000). PROCESS MODELING OF A CELLULOSE PARTICLE DURING PYROLYSIS. In 1st World Conference on Biomass for Energy and Industry : part II.. pp. 1848--1851.

Costa-Kramer, J. , Garcia, N. , Jonson, M. , Krive, I. , Olin, H. , Serena, P. , Shekhter, R. , Garcia, N. & et al. (1998). Low voltage nonlinear conductance of gold nanowires : Room temperature Coulomb blockade effect. In 1998 CATALOG of E -SeriesNanoscale Science and Technology : 1998 CATALOG of E -SeriesResulting from ARW, Toledo (Spain), 1997. Dordrecht : (NATO ASI Series. Series E, Applied sciences)

Olin, H. , Blom, S. , Costa-Kramer, J. , Garcia, N. , Jonson, M. , Serena, P. , Shekhter, R. , Garcia, N. & et al. (1998). Simple model for force fluctuations in nanowires. In Nanoscale Science and Technology : Resulting from ARW, Toledo (Spain), 1997. Dordrecht : (NATO ASI Series. Series E, Applied sciences)

Larsson, M. , Ngyuen, B. , Hedenström, E. & Högberg, H. (1998). Synthesis and Studies of the Stereoisomeric Composition in the Sex Pheromone of Microdiprion pallipes. : Poster och abstrakt. Euchem conference, Sundsvall..

Anderbrant, O. , Högberg, H. , Hedenström, E. & Löfqvist, J. (1998). Towards use of Pine Sawfly Pheromones in Forest Protection : Evalution of a Behavioural Antagonist for Mationg Disruption of Neodiprion sertifer. In Population Dynamics, Impacts and Integrated Management of Forest Defoliating Insects. (Forest Service General Technical Report Northeastern Forest Experimental Station). pp. 53--63.

Claeson, T. , Delsing, P. , Ivanov, Z. , Kubatkin, S. , Kuzmin, L. , Olin, H. , Petrashov, V. , Shaikhadarov, R. & et al. (1998). Transport in mesoscopic superconductros and superconducting/normal metal contacts. In 1998 CATALOG of E -SeriesNanoscale Science and Technology. Resulting from ARW, Toledo (Spain), 1997. Dordrecht : (NATO ASI Series. Series E, Applied sciences)

Wahlström, E. , Ekvall, I. , Claesson, D. , Olin, H. & Wallden, L. (1998). Variable temperature STM investigation of standing waves in the 2D electron gas at the Cu(111) surface. In Proceedings of 7th European Conf. on Applications of Surface andInterfaceAnalysis.. pp. 563--566.

Olin, H. , Costa-Kramer, J. L. , Garcia, N. , Kubatkin, S. E. & Claeson, T. (1997). Conductance quantization in gold nanowires at low temperature.

Brauer, H. E. , Ekvall, I. , Olin, H. , Starnberg, H. I. & Wahlström, E. (1997). Sodium intercalation of VSe2 studied by photoemission and scanning tunneling microscopy. In ECASIA 97: 7TH EUROPEAN CONFERENCE ON APPLICATIONS OF SURFACE AND INTERFACE ANALYSIS.. pp. 599--602.

Berg, J. & Gradin, P. (1995). Effect of Temperature on Fracture of Spruce in Compression Using Acoustic Emissions. In AECM-5, Fifth International Symposium on Acoustic Emission From Composite Material. Columbus, OH, USA : . pp. 139--148.

Anderbrant, O. , Löfqvist, J. , Hedenström, E. & Högberg, H. (1995). Mating disruption of the Pine Sawfly Neodiprion sertifer (Hymenoptera: Dipionidae) : Effects on Pheromone Trap Catch, Sex Ratio, Population Density and Tree Damage. In Behavior, population dynamics, and control of forest insects : Proceedings of the International Union of Forestry Research Organizations Joint conference, February 1994.. pp. 415--427.

Doctoral theses, comprehensive summaries

Andres, B. (2017). Low-Cost, Environmentally Friendly Electric Double-Layer Capacitors : Conept, Materials and Production. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2017 (Mid Sweden University doctoral thesis : 267)  

Nelsson, E. (2016). Improved energy efficiency in mill scale production of mechanical pulp by increased wood softening and refining intensity. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2016 (Mid Sweden University doctoral thesis : 242)  

Osong, S. H. (2016). Mechanical Pulp-Based Nanocellulose : Processing and applications relating to paper and paperboard, composite films, and foams. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2016 (Mid Sweden University doctoral thesis : 245)  

Reyier Österling, S. (2015). Distributions Of Fiber Characteristics As A Tool To Evaluate Mechanical Pulps. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2015 (Mid Sweden University doctoral thesis : 211)  

Afewerki, S. (2014). Development of catalytic enantioselective C-C bond-forming and cascade transformations by merging homogeneous or heterogeneous transition metal catalysis with asymmetric aminocatalysis. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2014 (Mid Sweden University doctoral thesis : 206)  

Svanedal, I. (2014). Fundamental Characterization and Technical Aspects of a Chelating Surfactant. Dis. (Comprehensive summary) sundsvall : Mid Sweden University, 2014 (Mid Sweden University doctoral thesis : 179)  

Göransson, K. (2014). Internal Tar/CH4 Reforming in Biomass Dual Fluidised Bed Gasifiers towards Fuel Synthesis. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2014 (Mid Sweden University doctoral thesis : 187)  

Öhlund, T. (2014). Metal Films for Printed Electronics : Ink-substrate Interactions and Sintering. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2014 (Mid Sweden University doctoral thesis : 210)  

Fagerlund-Edfeldt, A. (2014). Naturally occurring phenols with antioxidant, antifungal and anti-browsing activity. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2014 (Mid Sweden University doctoral thesis : 198)

Zasadowski, D. (2014). Selective Separation Of Wood Components In Internal Process Waters Originating From Mechanical Pulping. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2014 (Mid Sweden University doctoral thesis : 184)  

Enberg, S. (2014). Storage of Hydrogen Peroxide Bleached Mechanical Pulp : Reduction in Reflectance over the Visible Spectrum. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2014 (Mid Sweden University doctoral thesis : 207)  

Wallin, E. (2014). The Scents of Nature : Identification and Synthesis of Bioactive Compounds Used in Insect Communication. Dis. (Comprehensive summary) Sundsvall : Mittuniversitetet, 2014 (Mid Sweden University doctoral thesis : 200)  

Dahlström, C. (2012). Quantitative microscopy of coating uniformity. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2012 (Mid Sweden University doctoral thesis : 129)  

Hellström, L. (2010). On the wood chipping process : a study on basic mechanisms in order to optimize chip properties for pulping. Dis. (Comprehensive summary) Sundsvall : Mittuniversitetet, 2010 (Mid Sweden University doctoral thesis : 83)  

Hummelgård, M. (2009). In-situ TEM Probing of Nanomaterials. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2009 (Mid Sweden University doctoral thesis : 69)  

Norgren, S. (2008). Effects of Reject Refining at High Temperature on TMP Fibre Properties. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2008 (Mid Sweden University doctoral thesis : 64)

Fjellström, H. (2008). Inhibition of light-induced colour reversion of wood-containing papers by means of coating. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2008 (Mid Sweden University doctoral thesis : 44)  

Logenius, L. (2008). The influence of high temperature on the discoloration and degradation of carbohydrates and on hydrogen peroxide bleaching of spruce TMP. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2008 (Mid Sweden University doctoral thesis : 46)

Berg, J. (2008). Wood and fibre mechanics related to the thermomechanical pulping process. Dis. (Comprehensive summary) Sundsvall : Mid Sweden University, 2008 (Mid Sweden University doctoral thesis : 63)  

Svensson, B. (2007). Frictional studies and high strain rate testing of wood under refining conditions. Dis. (Comprehensive summary) Sundsvall : Mittuniversitetet, 2007 (Mid Sweden University doctoral thesis : 31)  

Pettersson, G. (2007). Influence of Polymeric Multilayer Treatment on Out-of Plane Properties of CTMP-Based Paperboard. Dis. (Comprehensive summary) Sundsvall : Mittuniversitetet, 2007 (Mid Sweden University doctoral thesis : 40)

Licentiate theses, comprehensive summaries

Blomquist, N. (2016). Large-Scale Nanographite Exfoliation for Low-Cost Metal-Free Supercapacitors. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2016 (Mid Sweden University licentiate thesis : 125)

Duan, R. (2016). On Shaping Mechanical Properties of Lignocellulosic Materials by Benign Chemical Processing. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2016 (Mid Sweden University licentiate thesis : 124)

Ljunggren, J. (2015). Biochemical Interactions of Some Saproxylic Fungi. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2015 (Mid Sweden University licentiate thesis : 116)  

Osong, S. H. (2014). Mechanical Pulp Based Nano-ligno-cellulose : Production, Characterisation and their Effect on Paper Properties. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2014 (Mid Sweden University licentiate thesis : 109)  

Andres, B. (2014). Paper-based Supercapacitors. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2014 (Mid Sweden University licentiate thesis : 112)  

Öhlund, T. (2012). Coated Surfaces for Inkjet-Printed Conductors. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2012 (Mid Sweden University licentiate thesis : 84)  

Zasadowski, D. (2012). REMOVAL OF LIPOPHILIC EXTRACTIVES AND MANGANESE IONS FROM SPRUCE TMP WATER BY FLOTATION. Lic. (Comprehensive summary) Sundsvall : Mittuniversitet, 2012 (Mid Sweden University licentiate thesis : 74)  

Olsen, M. (2012). The mechanics in two nanosized systems : Size effect and threshold field. Lic. (Comprehensive summary) Sundsvall : Mittuniversitetet, 2012 (Mid Sweden University licentiate thesis : 78)  

Nelsson, E. (2011). Reduction of refining energy during mechanical pulping : using pressurised chip compression and sulphite pre-treatment. Lic. (Comprehensive summary) Uppsala : Sveriges Lantbruksuniversitet, 2011

Andersson, K. (2010). Lignin in wastewater generated by mechalical pulping : Chemical characterisation and removal by adsorption. Lic. (Comprehensive summary) Sundsvall : Mittuniversitetet, 2010 (Mid Sweden University licentiate thesis : 44)

Reyier, S. (2008). Bonding Ability Distribution of Fibers in Mechanical Pulp Furnishes. Lic. (Comprehensive summary) Sundsvall : FSCN - Fibre Science and Communication Network, 2008 (Mid Sweden University licentiate thesis : 31)  

Hellström, L. (2008). Fracture processes in wood chipping. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2008 (Mid Sweden University licentiate thesis : 32)  

Fjellström, H. (2006). The Photostabilising Effect of Coating Layers on CTMP‐based Papers. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2006 (Mid Sweden University licentiate thesis : 13)

Andersson, F. (2002). 1. Asymmetric aldol and alkylation reactions using pyrrolidine-based chiral auxiliaries 2. Syntheses of pine sawfly pheromone precursors and structurally related compounds. Lic. (Comprehensive summary) Stockholm : KTH Royal Institute of Technology, 2002 (Trita-IOK : forskningsrapport : 2002:69.)

Licentiate theses, monographs

Berg, J. (1996). Fracture Behaviour of Wood and Fibres as Related to the Mechanical Pulping Process. Lic. , 1996 (Licentiate thesis, Royal Institute of Technology : )

Manuscripts

Isaksson, P. , Gradin, P. A. & Kulachenko, A. Acoustic Emission applied to mechanically loaded Paper ??.

Norgren, S. , Gradin, P. , Höglund, H. & Isaksson, P. Acoustic emission monitoring to evaluate the z-direction and in-plane strength properties of TMP reject fraction.

Nordin, L. , O'Nils, M. , Engstrand, P. , Bäck, R. , Ferritsius, O. , Ferritsius, R. , Sandberg, C. & Sundvall, Ö. Analysis of the quality of optical fibre and fines measurement for prediction of dewatering characteristics for mechanical pulps.

Hummelgård, M. , Isaksson, P. , Olin, H. & Mihailovic, D. Bending Modulus of Mo6S3I6 Nanowires Studied by Electromechanical Resonances.

Reyier, S. & Ferritsius, O. BIN - a method of measuring the distribution of Bonding Indicator of fibers in mechanical pulp furnishes.

Sjöberg, J. & Höglund, H. Ductile reinforcement Kraft pulp in TMP-based furnishes.

Logenius, L. , Agnemo, R. & Höglund, H. High-Temperature Bleaching of Mechanical Pulps from Spruce.

He, J. H. , Wan, H. , He, T. & Zhang, W. Research progress on biomass fuel ethanol.

Klinga, N. , Höglund, H. & Sandberg, C. Sheet properties of high yield pulps related to different pressing and drying conditions - part II.

Hummelgård, M. , Åström, M. , Karlsson, K. G. & Olin, H. Student-built Scanning-Tunneling-Microscope used in CDIO project oriented course.

Other

Engström, A. (2014). Graphite containing coatings aimed for supercapacitors.  

Niskanen, K. (2014). Lagra kol i form av trämaterial (Reflektion & Dialog).  

Patents

Enoksson, P. , Nafari, A. , Olin, H. , Althoff, A. , Danilov, A. & Dahlström, J. (2010). MEMS Nanoindenter.

Olin, H. , Althoff, F. , Hendelberg, R. & Carlsson, N. (2009). An access point for mobile devices in packet based network.

Olin, H. , Althoff, F. , Hendelberg, R. & Carlsson, N. (2009). An access point for mobile devices in packet based network and method and system for billing in such network.

Olin, H. , Svensson, K. , Althoff, F. , Danilov, A. , Bengtsson, P. & Hospers, M. (2009). Device for reducing the impact of distortion in a microscope.

Olin, H. , Svensson, K. , Althoff, F. & Danilov, A. (2008). Measurement device for electron microscope. European Patent Office

Olin, H. , Althoff, F. & Svensson, K. (2008). Micropositioning device.

Engstrand, P. , Sandberg, C. & Nilsson, C. F. (2007). Method for selective removal of ray cells from cellulose pulp US 20070023329 A1.

Engstrand, P. , Sandberg, C. & Nilsson, C. F. (2006). A method for selective removal of ray cells from cellulose pulp EP 1625253 A1.

Olin, H. , Althoff, F. & Svensson, K. (2005). Device for reducing the impact of distortion in a microscope.

Olin, H. , Högberg, B. & Glans, L. (2005). METHOD AND COMPUTER PROGRAM FOR THE SELF-ASSEMBLY OF A NANOSTRUCTURE : PCT Patent Application no. PCT/SE2005/000587.

Olin, H. (2005). Method for increasing the measurement information from a transmission electron microscope and a transmission electron microscope device.

Engstrand, P. , Sandberg, C. , Jonsson, J. , Starck, G. , Wahlgren, M. & Wancke-Ståhl, C. (2005). Method of producing bleached thermomechanical pulp (tmp) or bleached chemithermomechanical pulp (ctmp) EP 1407073 B1.

Olin, H. , Althoff, F. & Svensson, K. (2005). Micropositioning device.

Nilsson, H. , Olin, H. , Bertilsson, K. & Hummelgård, M. (2005). Nanoelectronic device (Swedish Patent Application no. 0501443-6).

Engstrand, P. , Lindgren, J. & Agnemo, R. (2004). A method for increasing the stability of fluorescent whitening agent WO 2004050994 A1.

Sandberg, C. , Engstrand, P. & Nilsson, C. F. (2004). A method for selective removal of ray cells from cellulose pulp CA 2524177 A1.

Engstrand, P. , Sandberg, C. & Nilsson, C. F. (2004). A method for selective removal of ray cells from cellulose pulp WO 2004097106 A1.

Olin, H. , Althoff, F. & Hendelberg, R. (2004). An access point for mobile devices in a packet based network and a method and a system for billing in such a network (Japanese Patent Application, No. JP2004523143).

Olin, H. , Althoff, F. & Hendelberg, R. (2004). An access point for mobile devices in a packet based network and a method and a system for billing in such a network : US Patent Application, US2004/005878.

Olin, H. , Högberg, B. & Glans, L. (2004). Method, device and computer program (Swedish patent application No. 0401016-1).

Engstrand, P. , Sandberg, C. , Jonsson, J. , Wancke-Ståhl, C. , Starck, G. & Wahlgren, M. (2004). Method of producing bleached thermomechanical pulp (tmp) or bleached chemithermomechanical pulp (ctmp).

Engstrand, P. , Sandberg, C. , Wancke-Ståhl, C. , Jonsson, J. , Starck, G. & Wahlgren, M. (2004). Method of producing bleached thermomechanical pulp (tmp) or bleached chemithermomechanical pulp (ctmp) US 20040231811 A1.

Olin, H. , Althoff, F. & Svensson, K. (2004). Micropositioning device (Japanese Patent Application, No. JP2004515769).

Olin, H. , Althoff, F. & Hendelberg, R. (2003). Access point for mobile devices in packet based network and method and system for billing in such network.

Olin, H. (2003). Method for increasing the measurement information from a transmission electron microscope and a transmission electron microscope device (Japanese Patent Application JP2003524287).

Engstrand, P. , Sandberg, C. , Jonsson, J. , Wancke-Ståhl, C. , Starck, G. & Wahlgren, M. (2003). Method of producing bleached thermomechanical pulp (tmp) or bleached chemithermomechanical pulp (ctmp) CA 2451155 A1.

Engstrand, P. , Sandberg, C. , Jonsson, J. , Starck, G. , Wahlgren, M. & Wancke-Ståhl, C. (2003). Method of producing bleached thermomechanical pulp (tmp) or bleached chemithermomechanical pulp (ctmp) WO 2003000982 A1.

Olin, H. , Althoff, F. & Svensson, K. (2003). Micropositioning device.

Svensson, K. , Olsson, E. & Olin, H. (2003). Nanopipett (Swedish Patent Application No. 0300864-6).

Olin, H. , Althoff, F. , Svensson, K. , Danilov, A. , Bengtsson, P. & Hospers, M. (2003). Sample chamber device for an electron microscope (Patent application WO/2003/007329).

Olin, H. , Svensson, K. , Althoff, F. , Danilov, A. , Bengtsson, P. & Hospers, M. (2003). Sample chamber for an electron microscope.

Olin, H. , Gustafsson, K. & Gralvik, P. (2002). A device for micropositioning of an object.

Olin, H. , Gustafsson, K. & Gralvik, P. (2002). A device for micropositioning of an object. (US Patent, US 6452307)

Olin, H. , Althoff, F. & Svensson, K. (2002). Method for increasing the measurement information available from a transmission electron microscope and a transmission electron device. (European Patent, No. EP 1257780)

Olin, H. (2002). Method for increasing the measurement information from a transmission electron microscope and a transmission electron device (Australian Patent Application No. 2001234318).

Olin, H. , Althoff, F. & Svensson, K. (2002). Micropositioning device.

Olin, H. , Gustafsson, K. & Gralvik, P. (2001). Anordning för mikropositionering av object genom användning av mekanisk tröghet. (Svensk Patent No. SE 515985)

Olin, H. , Gustavsson, K. & Gralvik, P. (2001). Device for micropositioning of an object (Australian patent application 58600/00).

Engstrand, P. & Karlström, A. (1994). System for continuously measuring pressure and temperature in the beating zone of refiners WO 1996014156 A1.

Engstrand, P. & Karlström, A. (1994). System zur kontinuierlichen messung von druck und temperatur im zerkleinerungsbereich eines refinders.

Engstrand, P. , Pettersson, R. , Htun, M. , Hammar, L. Å. & Svensson, B. (1993). Method of making mechanical and chemi-mechanical papermaking pulp CA 1320067 C.

Engstrand, P. , Pettersson, R. , Htun, M. , Hammar, L. Å. & Svensson, B. (1993). Method of making mechanical and chemi-mechanical papermaking pulp EP 0413736 B1.

Engstrand, P. , Hammar, L. Å. , Sjögren, B. , Svensson, B. & Htun, M. (1992). A method of producing cellulosic pulp EP 0500674 A1.

Engstrand, P. , Hammar, L. Å. , Sjögren, B. , Svensson, B. & Htun, M. (1991). A method of producing cellulosic pulp WO 1991006700 A1.

Engstrand, P. , Pettersson, R. , Hammar, L. Å. , Htun, M. & Svensson, B. (1991). Method of making mechanical and chemi-mechanical papermaking pulp. EP 0413736 A1.

Engstrand, P. , Hammar, L. Å. , Htun, M. & Pettersson, R. (1991). Method of reducing the energy consumption at the refining of cellulose containing material US 5007985 A.

Engstrand, P. , Hammar, L. Å. , Htun, M. & Pettersson, R. (1991). Method of reducing the energy consumption at the refining of cellulose containing material US 5007985 A.

Engstrand, P. , Htun, M. , Pettersson, R. & Hammar, L. Å. (1991). Method of reducing the energy consumption at the refining of cellulose-containing material CA 1281856 C.

Shigetani, T. , Yamana, T. , Kamiya, M. & Uesaka, T. (1990). Support sheet for photographic paper.

Engstrand, P. , Hammar, L. Å. , Htun, M. , Pettersson, R. & Svensson, B. (1989). Method of making mechanical and chemi-mechanical papermaking pulp WO 1989010998 A1.

Engstrand, P. , Hammar, L. Å. , Htun, M. & Pettersson, R. (1989). Method of reducing the energy consumption at the refining of cellulose-containing material EP 0302075 A1.

Engstrand, P. , Htun, M. , Hammar, L. Å. & Pettersson, R. (1987). Method of reducing the energy consumption at the refining of cellulose-containing material WO 1987006280 A1.

Reports

Engstrand, P. O. , Ferritsius, O. , Björkqvist, O. , Johansson, L. , Johansson, Ö. , Daniel, G. , Ferritsius, R. , Karlström, A. & et al. (2015). Mekmassainitiativet för energieffektivitet, e2mp-i. Sundsvall : Mittuniversitetet (Rapportserie FSCN 2015:58).

Engstrand, P. O. & Engberg, B. A. (2014). Filling the Gap - Final Report. Sundsvall : (Rapportserie FSCN 2014:57).

Björkqvist, O. , Engstrand, P. & Fridén, H. (2008). Energiåtervinning vid LC-raffinering – Förstudie. Stockholm : Värmeforsk (Värmeforsk skogsindustriella programmet S5-622).

Göransson, K. & Zhang, W. (2007). A technical description of BTL laboratory at Mid Sweden University.

Zhang, W. (2007). Bioethanol market and perspective.

Zhang, W. (2007). Biomass pellet perspective and market.

Wennan, Z. (2007). Coal gasification - for LKAB pelletizing furnaces.

Zhang, W. (2007). Peat perspective and market.

Kulachenko, A. , Gradin, P. A. & Uesaka, T. (2006). Basic mechanisms of fluting formation and retention in paper. Sundsvall : Mittuniversitetet, FSCN (Rapportserie FSCN 2006:36). (FSCN-rapport R-06-65).  

Olofsson, I. , Nordin, A. & Söderlind, U. (2005). Initial Review and Evaluation of Process Technologies and Systems Suitable for Cost-Efficient Medium-Scale Gasification for Biomass to Liquid Fuels. Umeå : Umeå Universitet (ETPC Report 05-02).

Fredriksson, M. & Forsberg, S. (2005). Wood Fibre Composites with High Fibre Content. Sundsvall : Mittuniversitetet, FSCN (Rapportserie FSCN 2004:32). (FSCN-rapport R-05-60).  

Gradin, P. A. (2004). Acoustic emission monitoring during mechanical-loading of paper : State of the art. Sundsvall : Mitthögskolan, FSCN (Rapportserie FSCN 2004:28). (FSCN-rapport R-04-55).  

Uesaka, T. (2004). Web breaks in pressroom : a review. Sundsvall : Mitthögskolan, FSCN (Rapportserie FSCN 2004:31). (FSCN-rapport R-04-58).  

Norgren, M. & Edlund, H. (2002). Ion specific differences in salt induced precipitation of kraft lignin. Sundsvall : Mitthögskolan, FSCN (Rapportserie FSCN 2002:14). (FSCN-rapport R-02-38).

Zhang, W. & Leckner, B. (2001). PROCESS SIMULATION OF CIRCULATING FLUIDIZED BEDS WITH COMBUSTION/GASIFICATION OF BIOMASS - The project final report : reporting the JOR3CT980306 project of 4th EU-framework Programme.

Chunjiang, Y. , Tabikl, A. , Leckner, B. & Zhang, W. (2000). Modeling of deposition and emission of alkalis in boiler systems : Mid-term reporting for project JOR3CT980306 of 4th EU-framework Programme.

Zhang, W. (2000). PROCESS SIMULATION OF CIRCULATING FLUIDIZED BEDS - mid term assessment report .

Zhang, W. (2000). PROCESS SIMULATION OF CIRCULATING FLUIDIZED BEDS - yearly report : reporting the JOR3CT980306 project of 4th EU-framework Programme.

Jensen, A. , Åsman, S. & Zhang, W. (2000). Pyrolys av Biobränsle.

Zhang, W. (1999). PROCESS SIMULATION OF CIRCULATING FLUIDIZED BEDS - yearly report.

For a complete list of publications, visit the webpage of each research group in the left-hand menu.

Contact

Head of FSCN Research centre

Kaarlo Niskanen

Centre Administrator

Anna Haeggström 

Public Relations

Inger Axbrink