Stefan Lindström

Publications

Articles in journals
Books
Conference papers
Doctoral theses, comprehensive summaries
Licentiate theses, comprehensive summaries
Other

Articles in journals

Sandberg, C. , Lindström, S. B. , Lyubitska, K. & Nilsson, F. (2025). Development of handsheet mechanical properties linked to fibre distributions in two-stage low consistency refining of high yield pulp. Nordic Pulp & Paper Research Journal, vol. 40: 2, pp. 275-285.    

Kapidžić, Z. , Lindström, S. B. , Moverare, J. , Lindström, T. , Thore, C. -. , Leidermark, D. & Franke, M. (2025). Equivalent initial damage sizes for PBF-LB Ti-6Al-4V notched geometries. International Journal of Fatigue, vol. 194  

Lindström, S. B. , Moverare, J. , Franke, M. , Persson, J. , Leidermark, D. , Thore, C. -. , Lindström, T. & Kapidžić, Z. (2025). Fatigue life prediction for PBF-LB Ti6A14V with as-built surface under nonproportional loads using an incremental fatigue damage model. International Journal of Fatigue, vol. 193    

Suresh, S. , Lindström, S. B. , Klarbring, A. , Wallin, M. & Thore, C. -. (2025). Non-proportional high-cycle fatigue-constrained gradient-based topology optimization using a continuous-time model. Computer Methods in Applied Mechanics and Engineering, vol. 435  

Lindström, S. B. , Ferritsius, R. , Carlson, J. E. , Persson, J. & Nilsson, F. (2025). Predicting handsheet properties and enhancing refiner control using fiber analyzer data and latent variable modeling. Computers and Chemical Engineering, vol. 199    

Sellman, F. A. , Rostami, J. , Östmans, R. , Cortes Ruiz, M. F. , Lindström, S. B. , Wågberg, L. & Benselfelt, T. (2024). Influence of fibril aspect ratio, chemical functionality, and volume fraction on the mechanical properties of cellulose nanofibril materials. Cellulose, vol. 31, pp. 8007-8025.    

Lindström, S. B. , Persson, J. , Ferritsius, R. , Ferritsius, O. & Engberg, B. A. (2024). Multivariate lognormal mixture for pulp particle characterization. Cellulose, vol. 31: 3, pp. 1843-1854.  

Lindström, S. B. , Amjad, R. , Gåhlin, E. , Andersson, L. , Kaarto, M. , Liubytska, K. , Persson, J. , Berg, J. & et al. (2024). Pulp Particle Classification Based on Optical Fiber Analysis and Machine Learning Techniques. Fibers, vol. 12: 1    

Östmans, R. , Benselfelt, T. , Erlandsson, J. , Rostami, J. , Hall, S. , Lindström, S. B. & Wågberg, L. (2024). Solidified water at room temperature hosting tailored fluidic channels by using highly anisotropic cellulose nanofibrils. Materials Today Nano, vol. 26    

Östmans, R. , Cortes Ruiz, M. F. , Rostami, J. , Sellman, F. A. , Wågberg, L. , Lindström, S. B. & Benselfelt, T. (2023). Elastoplastic behavior of anisotropic, physically crosslinked hydrogel networks comprising stiff, charged fibrils in an electrolyte. Soft Matter, vol. 19: 15, pp. 2792-2800.  

Benselfelt, T. , Shakya, J. , Rothemund, P. , Lindström, S. B. , Piper, A. , Winkler, T. E. , Hajian, A. , Wågberg, L. & et al. (2023). Electrochemically Controlled Hydrogels with Electrotunable Permeability and Uniaxial Actuation. Advanced Materials, vol. 35: 45  

Nagda, V. , Kulachenko, A. & Lindström, S. B. (2023). Image-based 3D characterization and reconstruction of heterogeneous battery electrode microstructure. Computational materials science, vol. 223  

Lindström, S. B. , Wemming, H. , Kapidžić, Z. , Loukil, M. S. & Segersäll, M. (2023). Integrated digital image correlation for mechanical characterization of carbon fiber-reinforced polymer plates. Composite structures, vol. 305  

Wemming, H. , Lindström, S. B. , Johansson, L. & Kapidžić, Z. (2023). Modelling and experimental parameter identification for fasteners in composite–aluminium bolted structures. Composite structures, vol. 323  

Lindström, S. B. , Moverare, J. , Xu, J. , Leidermark, D. , Eriksson, R. , Ansell, H. & Kapidžić, Z. (2023). Service-life assessment of aircraft integral structures based on incremental fatigue damage modeling. International Journal of Fatigue, vol. 172  

Cortes Ruiz, M. F. , Brusentsev, Y. , Lindström, S. B. , Xu, C. & Wågberg, L. (2023). Shape-recovering nanocellulose networks: Preparation, characterization and modeling. Carbohydrate Polymers, vol. 315  

Suresh, S. , Lindström, S. B. , Thore, C. & Klarbring, A. (2022). Acceleration of continuous-time, high-cycle fatigue constrained problems in topology optimization. European journal of mechanics. A, Solids, vol. 96  

Wemming, H. , Lindström, S. B. , Johansson, L. & Kapidzic, Z. (2022). Identification of bearing failure in composite–aluminium bolted joints using digital image correlation. Composite structures, vol. 300  

Lindström, S. B. , Moverare, J. , Leidermark, D. , Ansell, H. & Kapidzic, Z. (2022). Incremental fatigue damage modeling of 7050-T7 aluminum alloy at stress-raisers. International Journal of Fatigue, vol. 161  

Suresh, S. , Lindström, S. B. , Thore, C. & Klarbring, A. (2021). Topology optimization for transversely isotropic materials with high-cycle fatigue as a constraint. Structural and multidisciplinary optimization (Print), vol. 63, pp. 161-172.  

Lindström, S. B. (2020). Continuous-time, high-cycle fatigue model for nonproportional stress with validation for 7075-T6 aluminum alloy. International Journal of Fatigue, vol. 140  

Lindström, S. B. , Thore, C. , Suresh, S. & Klarbring, A. (2020). Continuous-time, high-cycle fatigue model : Validity range and computational acceleration for cyclic stress. International Journal of Fatigue, vol. 136  

Eskilsson, O. , Lindström, S. B. , Sepulveda, B. , Shahjamali, M. M. , Güell-Grau, P. , Sivlér, P. , Skog, M. , Aronsson, C. & et al. (2020). Self-assembly of mechanoplasmonic bacterial cellulose–metal nanoparticle composites. Advanced Functional Materials, vol. 30  

Suresh, S. , Lindström, S. B. , Thore, C. , Torstenfelt, B. & Klarbring, A. (2020). Topology optimization using a continuous-time high-cycle fatigue model. Structural and multidisciplinary optimization (Print), vol. 61, pp. 1011-1025.  

Benselfelt, T. , Nordenström, M. , Lindström, S. B. & Wågberg, L. (2019). Explaining the exceptional wet integrity of transparent cellulose nanofibril films in the presence of multivalent ions—suitable substrates for biointerfaces. Advanced Materials Interfaces, vol. 6: 13  

Lindström, S. B. , Uhlin, F. , Bjarnegård, N. , Gylling, M. , Nilsson, K. , Svensson, C. , Yngman-Uhlin, P. & Länne, T. (2018). Computer-aided evaluation of blood vessel geometry from acoustic images. Journal of ultrasound in medicine, vol. 37: 4, pp. 1025-1031.  

Alimadadi, M. , Lindström, S. B. & Kulachenko, A. (2018). Role of microstructures in the compression response of three-dimensional foam-formed wood fiber networks. Soft Matter, vol. 14: 44, pp. 8945-8955.  

Lindström, S. B. , Stålhand, J. & Klarbring, A. (2017). Modeling of the mechanobiological adaptation in muscular arteries. European journal of mechanics. A, Solids, vol. 64, pp. 165-177.  

Hajian, A. , Lindström, S. B. , Pettersson, T. , Hamedi, M. M. & Wågberg, L. (2017). Understanding the dispersive action of nanocellulose for carbon nanomaterials. Nano Letters, vol. 17, pp. 1439-1447.  

Andrić, J. , Lindström, S. B. , Sasic, S. & Nilsson, H. (2016). Ballistic deflection of fibres in decelerating flow. International Journal of Multiphase Flow, vol. 85, pp. 57-66.  

Gibaud, T. , Perge, C. , Lindström, S. B. , Taberlet, N. & Manneville, S. (2016). Multiple yielding processes in a colloidal gel under large amplitude oscillatory stress. Soft Matter, vol. 12, pp. 1701-1712.  

Andrić, J. , Lindström, S. B. , Sasic, S. & Nilsson, H. (2016). Particle-level simulations of flocculation in a fiber suspension flowing through a diffuser. Thermal Science, vol. 20: suppl. 6  

Lindström, S. B. , Satha, G. & Klarbring, A. (2015). Extension of Murray’s law including nonlinear mechanics of a composite artery wall. Biomechanics and Modeling in Mechanobiology, vol. 14: 1, pp. 83-91.  

Olin, P. , Lindström, S. B. & Wågberg, L. (2015). Trapping of water drops by line-shaped defects on superhydrophobic surfaces. Langmuir, vol. 31: 23, pp. 6367-6374.  

Satha, G. , Lindström, S. B. & Klarbring, A. (2014). A goal function approach to remodeling of arteries uncovers mechanisms for growth instability. Biomechanics and Modeling in Mechanobiology, vol. 13: 6, pp. 1243-1259.  

Carrick, C. , Lindström, S. B. , Larsson, P. T. & Wågberg, L. (2014). Lightweight, highly compressible, noncrystalline cellulose capsules. Langmuir, vol. 30: 26, pp. 7635-7644.  

Lindström, S. B. , Johansson, L. & Karlsson, N. R. (2014). Metastable states and activated dynamics in thin-film adhesion to patterned surfaces. Physical Review E. Statistical, Nonlinear, and Soft Matter Physics, vol. 89  

Andrić, J. , Lindström, S. B. , Sasic, S. & Nilsson, H. (2014). Rheological properties of dilute suspensions of rigid and flexible fibers. Journal of Non-Newtonian Fluid Mechanics, vol. 212, pp. 36-46.  

Fall, A. B. , Lindström, S. B. , Sprakel, J. & Wågberg, L. (2013). A physical cross-linking process of cellulose nanofibril gels with shear-controlled fibril orientation. Soft Matter, vol. 9: 6, pp. 1852-1863.  

Andrić, J. , Fredriksson, S. T. , Lindström, S. B. , Sasic, S. & Nilsson, H. (2013). A study of a flexible fiber model and its behavior in DNS of turbulent channel flow. Acta Mechanica, vol. 224: 10, pp. 2359-2374.  

Lindström, S. B. , Kulachenko, A. , Jawerth, L. M. & Vader, D. A. (2013). Finite-strain, finite-size mechanics of rigidly cross-linked biopolymer networks. Soft Matter, vol. 9: 30, pp. 7302-7313.  

Olin, P. H. , Lindström, S. B. , Pettersson, T. & Wågberg, L. (2013). Water drop friction on superhydrophobic surfaces. Langmuir, vol. 29: 29, pp. 9079-9089.  

Lavrykov, S. , Lindström, S. B. , Singh, K. M. & Ramarao, B. V. (2012). 3D network simulations of paper structure. Nordic Pulp & Paper Research Journal, vol. 27: 2, pp. 256-263.  

Kulachenko, A. , Danoyelle, T. , Galland, S. & Lindström, S. B. (2012). Elastic properties of cellulose nanopaper. Cellulose, vol. 19: 3, pp. 793-807.  

Bakker, H. E. , Lindström, S. B. & Sprakel, J. (2012). Geometry- and rate-dependent adhesive failure of micropatterned surfaces. Journal of Physics, vol. 24: 6  

Lindström, S. B. , Karabulut, E. , Kulachenko, A. , Sehaqui, H. & Wågberg, L. (2012). Mechanosorptive creep in nanocellulose materials. Cellulose, vol. 19: 3, pp. 809-819.  

Lindström, S. B. , Kodger, T. E. , Sprakel, J. & Weitz, D. A. (2012). Structures, stresses, and fluctuations in the delayed failure of colloidal gels. Soft Matter, vol. 8: 13, pp. 3657-3664.  

Wiklund, H. , Lindström, S. B. & Uesaka, T. (2011). Boundary condition considerations in lattice Boltzmann formulations of wetting binary fluids. Computer Physics Communications, vol. 182: 10, pp. 2192-2200.  

Fall, A. B. , Lindström, S. B. , Sundman, O. , Ödberg, L. & Wågberg, L. (2011). Colloidal stability of aqueous nanofibrillated cellulose dispersions. Langmuir, vol. 27: 18, pp. 11332-11338.  

Hämäläinen, J. , Lindström, S. B. , Hämäläinen, T. & Niskanen, H. (2011). Papermaking fiber suspension flow simulations at multiple scales. Journal of Engineering Mathematics, vol. 71: 1, pp. 55-79.  

Holmvall, M. , Lindström, S. B. & Uesaka, T. (2011). Simulation of two-phase flow with moving immersed boundaries. International Journal for Numerical Methods in Fluids, vol. 67: 12, pp. 2062-2080.  

Sprakel, J. , Lindström, S. B. , Kodger, T. E. & Weitz, D. A. (2011). Stress enhancement in the delayed yielding of colloidal gels. Physical Review Letters, vol. 106: 24  

Holmvall, M. , Uesaka, T. , Drolet, F. & Lindström, S. B. (2011). Transfer of a microfluid to a stochastic fibre network. Journal of Fluids and Structures, vol. 27: 7, pp. 937-946.  

Lindström, S. B. , Vader, D. A. , Kulachenko, A. & Weitz, D. A. (2010). Biopolymer network geometries : Characterization, regeneration, and elastic properties. Physical Review Letters, vol. 82: 5  

Lindström, S. B. & Uesaka, T. (2009). A numerical investigation of the rheology of fiber suspensions. Physics of fluids, vol. 21: 8  

Lindström, S. B. & Uesaka, T. (2009). A numerical investigation of the rheology of sheared fiber suspensions. Physics of fluids, vol. 21: 8, pp. 083301  

Lindström, S. B. & Uesaka, T. (2008). Particle-level simulation of forming of the fiber network in papermaking. International Journal of Engineering Science, vol. 46: 9, pp. 858-876.  

Lindström, S. B. & Uesaka, T. (2008). Simulation of semidilute suspensions of non-Brownian fibres in shear flow. Journal of Chemical Physics, vol. 128: 2, pp. 024901  

Lindström, S. B. & Uesaka, T. (2007). Simulation of the motion of flexible fibres in viscous fluid flow. Physics of fluids, vol. 19: 11  

Books

Lindström, S. (2019). Lectures on Engineering Mechanics : Statics och Dynamics. Linköping :

Lindström, S. (2019). Matematisk ordbok för högskolan : engelsk-svensk, svensk-engelsk. Linköping :

Conference papers

Lindström, S. B. , Moverare, J. , Leidermark, D. , Ansell, H. , Schmidt, P. & Kapidzic, Z. (2022). Fatigue life assessment of integral structures. Paper presented at the Svenska mekanikdagar

Kapidzic, Z. , Lindström, S. B. & Lundgren, J. (2022). Incremental fatigue damage model : Application to plane problems with non-proportional loading. In ICAS PROCEEDINGS 33th Congress of the International Council of the Aeronautical Sciences Stockholm, Sweden.  

Lilja, M. , Karlsson, J. , Jonsson, A. , Hilding, D. , Lindström, S. B. , Leidermark, D. & Schmidt, P. (2020). Incremental damage model for fatigue life assessment in complete machinery simulation. In 16th International LS-DYNA(R) Users Conference.

Lindström, S. , Suresh, S. , Thore, C. & Klarbring, A. (2019). A continuous-time, high-cycle fatigue model and rotary stress. Paper presented at the Svenska mekanikdagar

Lindström, S. , Suresh, S. , Thore, C. & Klarbring, A. (2019). Continuous-time fatigue model : Acceleration for cyclic load. Paper presented at the 6th International Conference on Material Modelling. Sweden, Lund, 26th-28th June, 2019

Azeez, A. , Eriksson, R. , Calmunger, M. , Lindström, S. B. & Simonsson, K. (2019). Low cycle fatigue modelling of a steam turbine rotor steel. In Procedia Structural Integrity.. pp. 149--154.  

Suresh, S. , Lindström, S. , Thore, C. , Torstenfelt, B. & Klarbring, A. (2018). An evolution-based high-cycle fatigue constraint in topology optimization. In Proceedings of the 6th International Conference on Engineering Optimization – EngOpt 2018.. pp. 844--854.  

Lindström, S. B. & Holmberg, L. J. (2017). Automated examination in Statics and Dynamics through individualized home assignments. In Svenska Mekanikdagar.

Wågberg, L. , Nordenström, M. & Lindström, S. B. (2016). Colloidal chemical properties of Cellulose NanoFibrils (CNFs) — accepted knowledge and challenges. In Proceedings of the 251st American Chemical Society National Meeting & Exposition.

Lindström, S. B. , Andrić, J. , Sasic, S. & Nilsson, H. (2016). Deviatoric stresses in suspensions of flexible or curved fibers. In Proceedings of th 9th International Conference on Multiphase Flow.

Lindström, S. B. , Stålhand, J. & Klarbring, A. (2016). The effect of smooth muscle contractility on arterial growth and remodelling. In Proccedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering.

Perge, C. , Lindström, S. B. , Taberlet, N. , Gibaud, T. & Manneville, S. (2015). Large amplitude oscillatory stress and fatigue in colloidal gels. In Proceedings of the 10th Annual European Rheology Conference.

Andrić, J. , Lindström, S. B. , Sasic, S. & Nilsson, H. (2014). Numerical investigation of fiber flocculation in the air flow of an asymmetrical diffuser. In Proc. ASME 12th Int. Conf. on nanochannels, microchannels, and minichannels.

Andrić, J. , Lindström, S. B. , Sasic, S. & Nilsson, H. (2013). A particle-level fiber model, implemented in a general-purpose CFD code. In Proc. of Svenska Mekanikdagar.

Andrić, J. , Lindström, S. B. , Sasic, S. & Nilsson, H. (2013). A particle-level fiber model, implemented in OpenFOAM(R). In Proceedigs of the 8th Int. OpenFOAM(R) Workshop.

Andrić, J. , Lindström, S. B. , Sasic, S. & Nilsson, H. (2013). A particle-level rigid fiber model for high-Reynolds number flow, implemented in a general-purpose CFD code. In Proc. 8th Int. Conf. Multiphase Flow.

Andrić, J. , Lindström, S. B. , Sasic, S. & Nilsson, H. (2013). Description and validation of a flexible fiber model, implemented in a general purpose CFD code. In Proc. 8th Int. Conf. Multiphase Flow.

Lindström, S. B. & Sprakel, J. (2013). Thermally-activated delayed failure in heterogeneous solids : An experimental model system. In Proc. of Svenska Mekanikdagar.

Lindström, S. B. , Lavrykov, S. , Singh, K. M. & Ramarao, B. V. (2012). Forming of paper sheets : A numerical simulation based on hydrodynamics of fibrous suspensions. In Proc. of PaperCon 2012.. pp. 1221--1279.

Satha, G. , Lindström, S. B. & Klarbring, A. (2012). Growth and remodeling of arterial tissue : One-dimensional constrained mixture theory. In Proc. of 8th European Solid Mechanics Conference.

Holmvall, M. , Drolet, F. , Uesaka, T. & Lindström, S. (2011). Micro-fluidics in printing nip - Liquid transfer on random fibre network surface. In Progress in Paper Physics Seminar. Graz, Austria :

Fall, A. , Lindström, S. B. , Sprakel, J. , Löfroth, J. -. & Wågberg, L. (2011). Shear-stiffening cellulose nanofiber gels with tuneable mechanical characteristics. In Proc. of the 241st National Meeting and Exposition of the American-Chemical-Society.

Lindström, S. B. , Cervin, N. T. & Wågberg, L. (2011). Thermally activated capillary intrusion of water into cellulose fiber-based materials. In Proceedings of the Fundamental and Applied Pulp & Paper Modeling Symposium 2011  PAPTAC.. pp. 13--26.

Lindström, S. B. , Uesaka, T. & Hirn, U. (2009). Evolution of the paper structure along the length of a twin-wire former. In ADVANCES IN PULP AND PAPER RESEARCH, OXFORD 2009, VOLS 1-3. Bury, UK : . pp. 207--245.

Lindström, S. B. , Kulachenko, A. & Uesaka, T. (2009). New insights in paper forming from particle-level process simulations. In Papermaking Research Symposium 2009. Kuopio, Finland : . pp. 38-

Kulachenko, A. , Lindström, S. B. & Uesaka, T. (2009). Strength of wet fiber networks : Size scaling. In Proc. Papermaking Research Symposium.

Kulachenko, A. , Lindström, S. B. & Uesaka, T. (2009). Strength of wet fiber networks-Strength scaling. In Papermaking Research Symposium 2009. Kuopio : . pp. 35-

Lindström, S. B. & Uesaka, T. (2008). Effects of interparticle friction on the rheology of fibre suspensions. In 5th European Congress on Computational Methods in Applied Sciences and Engineering : TS318, Computational Materials Mechanics V.

Kulachenko, A. , Uesaka, T. & Lindström, S. B. (2008). Reinventing mechanics of fiber networks. In Progress in Paper Physics Seminar.. pp. 185--187.

Kulachenko, A. , Uesaka, T. & Lindström, S. B. (2008). Reinventing mechanics of fibre network. In Progress in Paper Physics Seminar. Helsinki : . pp. 185--193.

Lindström, S. B. & Uesaka, T. (2008). Simulation of paper structure development in a roll-blade former. In Progress in Paper Physics Seminar. Espoo : . pp. 139--141.

Lindström, S. B. & Uesaka, T. (2007). A model for flexible fibres in viscous and inert fluid. In 61st Appita annual conference and exhibition, Gold Coast, Australia, 6-9 May 2007, 2007 International paper physics conference, 6pp [Carlton, Australia: Appita, 2007.. pp. 23--28.

Lindström, S. B. (2006). Paper structure modelling with particle-level process simulation. In Progress in Paper Physics Seminar. Miami, Ohio : . pp. 86--87.

Lindström, S. B. & Uesaka, T. (2006). Suspensions of flexible fibres in flows of decaying turbulence. In Euromech. Sundsvall :

Lindström, S. B. & Uesaka, T. (2005). Stochastic Modelling of Paper Structure. Effects of Forming Section. In Proceedings, 5th Biennal Johan Gullichsen Colloquium, Helsinki, 17. Nov. 2005. Helsinki : . pp. 25--35.

Doctoral theses

Lindström, S. B. (2008). Modelling and simulation of paper structure development. Dis. (Comprehensive summary) Sundsvall : Department of Natural Sciences, Engineering and Mathematics, Mid Sweden University, 2008 (Mid Sweden University doctoral thesis : 60)  

Licentiate theses, comprehensive summaries

Lindström, S. B. (2007). Simulations of the Dynamics of Fibre Suspension Flows. Lic. (Comprehensive summary) Sundsvall : Mid Sweden University, 2007 (Mid Sweden University licentiate thesis : 25)  

Other

Lindström, S. B. (2008). Modeling and simulation of paper structure development.