Sök

Andra söktjänster

Hitta kurser och program Sök kursplaner Sök välkomstbrev Sök personal

Ghadir Razaz

Forskare|Researcher

Ph.D degree: Engineering physics from Mid Sweden University.

Master degree: Mechanical engineering with focus on material engineering from Karlstad University in Sweden.

Bakgrund

From my post-doc, I have started doing research on energy storage system with focus on Aluminum-ion battery.
During PhD study, I have been performing research in Aluminum alloys DC casting area with focus on various subjects in this field such as alloy design, solidification, segregation, inclusion, alloying elements dissolution, phase analysis and hot tearing defect. The purpose of all was minimizing defects in aluminum alloys. My research on Aluminum alloys has been carried out in close cooperation with Kubikenborg Aluminium AB (Sweden) in Sundsvall.
With doing research in aluminum alloy design process, I received experience and knowledge in metallurgy, material characterizations, and experimental set up in the lab.

Forskningsområden

Battery-metallurgy-casting-aluminum alloys

Forskningsprojekt

Pågående

Grafenbestruken aluminiumfolie som strömavtagare till LiFePO4 -katoder i litiumjonbatterier (ALGCC)

Utveckling av uppladdningsbart aluminium-grafit Dual-Ion batteri

Avslutade

Al-1wt%Fe legeringsanod som innehåller nanopartiklar som förbättrar aluminiumbatteriets prestanda

DRIVE

Publikationer

Artiklar i tidskrifter
Doktorsavhandlingar, sammanläggningar
Kapitel i böcker, del av antologier
Konferensbidrag
Licentiatavhandlingar, sammanläggningar

Artiklar i tidskrifter

Razaz, G. , Weißensteiner, I. , Örtegren, J. , Trink, B. , Pogatscher, S. & Arshadi Rastabi, S. (2024). Impact of Surface Microstructure and Properties of Aluminum Electrodes on the Plating/Stripping Behavior of Aluminum-Based Batteries Using Imidazolium-Based Electrolyte. ACS Applied Materials and Interfaces, vol. 16: 47, ss. 65725-65736.    

Razaz, G. , Arshadi Rastabi, S. , Blomquist, N. , Örtegren, J. , Carlberg, T. , Hummelgård, M. & Olin, H. (2023). Aluminum Alloy Anode with Various Iron Content Influencing the Performance of Aluminum-Ion Batteries. Materials, vol. 16: 3  

Arshadi Rastabi, S. , Sarraf-Mamoory, R. , Razaz, G. , Blomquist, N. , Örtegren, J. & Olin, H. (2023). Porous NiMoO4-NrGO as a Battery-Like Electrode Material for Aqueous Hybrid Supercapacitors. Journal of Composites Science, vol. 7: 6  

Arshadi Rastabi, S. , Razaz, G. , Hummelgård, M. , Carlberg, T. , Blomquist, N. , Örtegren, J. & Olin, H. (2022). Metallurgical investigation of aluminum anode behavior in water-in-salt electrolyte for aqueous aluminum batteries. Journal of Power Sources, vol. 523  

Arshadi Rastabi, S. , Sarraf-Mamoory, R. , Razaz, G. , Blomquist, N. , Hummelgård, M. & Olin, H. (2021). Treatment of NiMoO4/nanographite nanocomposite electrodes using flexible graphite substrate for aqueous hybrid supercapacitors. PLOS ONE, vol. 16: 7    

Razaz, G. & Carlberg, T. (2019). Hot tearing susceptibility of AA3000 aluminum alloy containing Cu, Ti, and Zr. Metallurgical and Materials Transactions. A, vol. 50A: 8, ss. 3842-3854.    

Razaz, G. & Carlberg, T. (2019). On the dissolution Process of Manganese and Iron in Molten Aluminum. Metallurgical and Materials Transactions. A, vol. 50: 4, ss. 1873-1887.    

Razaz, G. & Carlberg, T. (2013). Casting practices influencing inclusion distributions in billets. Light Metals, , ss. 987-991.

Doktorsavhandlingar

Razaz, G. (2019). Problems in the Aluminium DC Casting Process Associated with Melt Treatment Operations. Diss. (Sammanläggning) Sundsvall : Mid Sweden University, 2019 (Mid Sweden University doctoral thesis : 294)  

Kapitel i böcker, del av antologier

Razaz, G. & Carlberg, T. (2021). Mold Design for More Accurate Chemical Composition Analysis of Aluminum Alloys. I Light Metals 2021 : The Minerals, Metals & Materials Series. Springer. S. 751-757.  

Konferensbidrag

Razaz, G. & Carlberg, T. (2017). Solidification studies of 3003 alloys with different Mn and Ti contents. I Solidification processing 2017 : proceedings of the 6th Decennial International Conference on Solidification Processing : 25-28 July 2017, Beaumont Estate, Old Windsor, UK.

Razaz, G. & Carlberg, T. (2016). Study of manganese dissolution in aluminum melts. I TMS Light Metals.. S. 731--736.

Razaz, G. & Carlberg, T. (2014). Segregation during metal sampling. I Materials science forum.. S. 83--88.  

Licentiatavhandlingar

Razaz, G. (2017). Investigation of the Drawbacks in the Aluminium Alloys Casting Process. Lic.-avh. (Sammanläggning) Sundsvall : Mid Sweden University, 2017 (Mid Sweden University licentiate thesis : 133)

Sidan uppdaterades 2024-11-16