Thomas Öhlund

Forskare|Researcher

  • Tjänstetitel: Forskare
  • Avdelning: Institutionen för naturvetenskap (NAT)
  • Telefon arbete: 010-142 78 79
  • E-postadress: thomas.ohlund@miun.se
  • Rumsnummer: S420
  • Forskningscentra: Fibre Science and Communication Network

Forskningsprojekt

Pågående

DRIVE

Avslutade

Publikationer

Artiklar i tidskrifter

Molina-Lopez, F. , Gao, T. Z. , Kraft, U. , Zhu, C. , Öhlund, T. , Pfattner, R. , Feig, V. R. , Kim, Y. & et al. (2019). Inkjet-printed stretchable and low voltage synaptic transistor array. Nature Communications, vol. 10: 1    

Zhang, R. , Hummelgård, M. , Forsberg, V. , Andersson, H. , Engholm, M. , Öhlund, T. , Olsen, M. , Örtegren, J. & et al. (2018). Photoconductivity of acid exfoliated and flash-light-processed MoS2 films. Scientific Reports, vol. 8    

Samyn, P. , Barhoum, A. , Öhlund, T. & Dufresne, A. (2018). Review: Nanoparticles and Nanostructured Materials in Papermaking. Journal of Materials Science, vol. 53: 1, ss. 146-184.  

Balliu, E. , Andersson, H. , Engholm, M. , Öhlund, T. , Nilsson, H. & Olin, H. (2018). Selective laser sintering of inkjet-printed silver nanoparticle inks on paper substrates to achieve highly conductive patterns. Scientific Reports, vol. 8: 1    

Barhoum, A. , Samyn, P. , Öhlund, T. & Dufresne, A. (2017). Review of recent research on flexible multifunctional nanopapers. Nanoscale, vol. 9: 40, ss. 15181-15205.  

Öhlund, T. , Hummelgård, M. & Olin, H. (2017). Sintering Inhibition of Silver Nanoparticle Films via AgCl Nanocrystal Formation. Nanomaterials, vol. 7: 8    

Öhlund, T. , Schuppert, A. , Andres, B. , Andersson, H. , Forsberg, S. , Schmidt, W. , Nilsson, H. , Andersson, M. & et al. (2015). Assisted sintering of silver nanoparticle inkjet inks on paper with active coatings. RSC Advances, vol. 5, ss. 64841-64849.      

Öhlund, T. , Schuppert, A. , Hummelgård, M. , Bäckström, J. , Nilsson, H. & Olin, H. (2015). Inkjet Fabrication of Copper Patterns for Flexible Electronics : Using Paper with Active Precoatings. ACS Applied Materials and Interfaces, vol. 7: 33, ss. 18273-18282.  

Zhang, R. , Andersson, H. , Andersson, M. , Andres, B. , Edlund, H. , Edström, P. , Edvardsson, S. , Forsberg, S. & et al. (2013). Soap-film coating : High-speed deposition of multilayer nanofilms. Scientific Reports, vol. 3, ss. Art. no. 1477    

Andersson, H. , Manuilskiy, A. , Lidenmark, C. , Gao, J. , Öhlund, T. , Forsberg, S. , Örtegren, J. , Schmidt, W. & et al. (2013). The influence of paper coating content on room temperature sintering of silver nanoparticle ink. Nanotechnology, vol. 24: 45, ss. Art. no. 455203  

Andersson, H. , Lidenmark, C. , Öhlund, T. , Örtegren, J. , Manuilskiy, A. , Forsberg, S. & Nilsson, H. (2012). Evaluation of coatings applied to flexible substrates to enhance quality of ink jet printed silver nano-particle structures. IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part C, vol. 2: 2, ss. 342-348.  

Andersson, H. , Hammarling, K. , Sidén, J. , Manuilskiy, A. , Öhlund, T. & Nilsson, H. (2012). Modified EAS Tag Used as a Resistive Sensor Platform. MDPI Electronics, vol. 1: 2, ss. 32-46.    

Öhlund, T. , Örtegren, J. , Forsberg, S. & Nilsson, H. (2012). Paper Surfaces for Metal Nanoparticle Inkjet Printing. Applied Surface Science, vol. 259, ss. 731-739.  

Doktorsavhandlingar, sammanläggningar

Öhlund, T. (2014). Metal Films for Printed Electronics : Ink-substrate Interactions and Sintering. Diss. (Sammanläggning) Sundsvall : Mid Sweden University, 2014 (Mid Sweden University doctoral thesis : 210)  

Konferensbidrag

Zhang, R. , Andersson, H. , Andersson, M. , Andres, B. , Edström, P. , Edvardsson, S. , Forsberg, S. , Hummelgård, M. & et al. (2013). High-speed deposition of multilayer nanofilms using soap-film coating. Paper presented at the 19th International Vacuum Congress (IVC-19), Paris, France, September 9-13 2013

Öhlund, T. & Andersson, M. (2012). Effect of Paper Properties on Electrical Conductivity and Pattern Definition for Silver Nanoparticle Inkjet Ink. I Proceedings of LOPE-C 2012.. S. 115--119.

Örtegren, J. , Öhlund, T. , Niga, P. , Makeen, K. , Andersson, H. & Nilsson, H. (2012). Print quality issues concerning inkjet printing of colour and electronics on paper. I PTS Symposium: Paper and Imaging 2012. Munich, Germany : . S. 251--263.

Andersson, H. , Öhlund, T. , Manuilskiy, A. , Forsberg, S. , Örtegren, J. & Nilsson, H. (2010). Evaluation of InkAid surface treatment to enhance print quality of ANP silver nano-particle ink on plastic substrates. I Large Area, Organic & Printed Electronics (LOPE-C) 2010. Frankfurt : . S. 241--245.

Öhlund, T. , Örtegren, J. , Andersson, H. & Nilsson, H. (2010). The importance of surface characteristics for structure definition of silver nanoparticle ink patterns on paper surfaces. I NIP26 and Digital Fabrication. Austin : . S. 309--313.

Öhlund, T. , Örtegren, J. , Andersson, H. & Nilsson, H. (2009). Sintering Methods for Metal Nanoparticle Inks on Flexible Substrates. I NIP 25: DIGITAL FABRICATION 2009, TECHNICAL PROGRAM AND PROCEEDINGS.. S. 614--617.

Licentiatavhandlingar, sammanläggningar

Öhlund, T. (2012). Coated Surfaces for Inkjet-Printed Conductors. Lic.-avh. (Sammanläggning) Sundsvall : Mid Sweden University, 2012 (Mid Sweden University licentiate thesis : 84)