Mikael Bäckström

Professor|Professor

Publikationer

Artiklar i tidskrifter

Botero, C. A. , Şelte, A. , Ramsperger, M. , Maistro, G. , Koptyug, A. , Bäckström, M. , Sjöström, W. & Rännar, L. (2021). Microstructural and mechanical evaluation of a cr-mo-v cold-work tool steel produced via electron beam melting (Ebm). Materials, vol. 14: 11  

Botero Vega, C. A. , Ramsperger, M. , Selte, A. , Åsvik, K. , Koptioug, A. , Skoglund, P. , Roos, S. , Rännar, L. & et al. (2020). Additive Manufacturing of a Cold-Work Tool Steel using Electron Beam Melting. Steel Research International, vol. 19: 5, ss. 1-6.  

Koptioug, A. , Popov, V. V. J. , Botero Vega, C. A. , Jiménez-Piqué, E. , Katz-Demyanetz, A. , Rännar, L. & Bäckström, M. (2020). Compositionally-tailored steel-based materials manufactured by electron beam melting using blended pre-alloyed powders. Materials Science & Engineering, vol. 771  

Petrone, N. , Candiotto, G. , Marzella, E. , Uriati, F. , Carraro, G. , Bäckström, M. & Koptyug, A. (2019). Feasibility of using a novel instrumented human head surrogate to measure helmet, head and brain kinematics and intracranial pressure during multidirectional impact tests. Journal of Science and Medicine in Sport, vol. 22: S1, ss. S78-S84.    

Koptioug, A. , Rännar, L. , Bäckström, M. & Surmenev, R. (2017). Additive manufacturing in metal : technology advances generate new research challenges. Nanotechnology. Development and Applications - XXI Century, , ss. 12-24.

Klingvall Ek, R. , Hong, J. , Thor, A. , Bäckström, M. & Rännar, L. (2017). Micro- to Macroroughness of Additively Manufactured Titanium Implants in Terms of Coagulation and Contact Activation. International Journal of Oral & Maxillofacial Implants, vol. 32: 3, ss. 565-574.  

Sundström, D. & Bäckström, M. (2017). Optimization of pacing strategies for variable wind conditions in road cycling. Proceedings of the Institution of Mechanical Engineers, Part P, vol. 231: 3, ss. 184-199.  

Koptyug, A. , Rännar, L. , Bäckström, M. & Shen, Z. (2016). New Metallurgy of Additive Manufacturing in Metal : Experiences from the Material and Process Development with Electron Beam Melting Technology (EBM). Materials Science Forum, vol. 879, ss. 996-1001.  

Ek, R. , Rännar, L. , Bäckström, M. & Carlsson, P. (2016). The Effect of EBM Process Parameters upon Surface Roughness. Rapid prototyping journal, vol. 22: 3, ss. 495-503.  

Cronskär, M. , Rännar, L. , Bäckström, M. , Nilsson, K. G. & Samuelsson, B. (2015). Patient-Specific Clavicle Reconstruction Using Digital Design and Additive Manufacturing. Journal of mechanical design (1990), vol. 137: 11  

Koptyug, A. , Rännar, L. , Bäckström, M. & Cronskär, M. (2014). Additive Manufacturing for Medical and Biomedical Applications: Advances and Challenges. Materials Science Forum, , ss. 1286-1291.

Koptyug, A. , Rännar, L. , Bäckström, M. , Fager Franzén, S. & Dérand, P. (2013). Additive Manufacturing Technology Applications Targeting Practical Surgery. International Journal of Life Science and Medical Research, vol. 3: 1, ss. 15-24.    

Cronskär, M. , Rännar, L. & Bäckström, M. (2013). Production of Customized Hip Stem Prostheses : a Comparison Between Machining and Additive Manufacturing. Rapid prototyping journal, vol. 19: 5, ss. 365-372.  

Koptyug, A. , Bäckström, M. , Tinnsten, M. & Carlsson, P. (2012). Cross-country ski vibrations and possible mechanisms of their influence on the free gliding. Procedia Engineering, vol. 34, ss. 473-478.    

Cronskär, M. , Rännar, L. & Bäckström, M. (2012). Implementation of digital design and solid free-form fabrication for customization of implants in trauma orthopaedics. Journal of medical and biological engineering, vol. 32: 2, ss. 91-96.  

Koptyug, A. , Bäckström, M. & Rännar, L. (2012). Tin Man- Making Spare Parts for Human Body. Science First Hand, vol. 44: 2, ss. 45-57.

Svoboda, A. , Tatar, K. , Norman, P. & Bäckström, M. (2008). Integrated approach for prediction of stability limits for machining with large volumes of material removal. International Journal of Production Research, vol. 46: 12, ss. 3207-3222.  

Norman, P. , Bäckström, M. , Rantatalo, M. , Svoboda, A. & Kaplan, A. (2006). A sophisticated platform for characterization, monitoring and control of machining. Measurement science and technology, vol. 17: 4, ss. 847-854.  

Bäckström, M. , Koptioug, A. & Tinnsten, M. (2006). People and Skis. Science-First Hand, : 3, ss. 110-125.  

Bäckström, M. & Wiklund, H. (2004). QFD as a tool to improve quality control in a complex manufacturing environment. The Asian Journal on Quality, vol. 5: 1, ss. 10-22.

Geldart, M. , Webb, P. , Larsson, H. , Bäckström, M. , Gindy, N. & Rask, K. (2003). A direct comparison of the machining performance of a variax 5 axis parallel kinetic machining centre with conventional 3 and 5 axis machine tools.. International journal of machine tools & manufacture, vol. 43: 11, ss. 1107-1116.

Bäckström, M. & Wiklund, H. (1998). Development of a multi-tooth approach to tool condition monitoring in milling. Insight, vol. 40: 8, ss. 548-552.

Klingvall Ek, R. , Bäckström, M. & Rännar, L. (). Fatigue properties of electrochemical polished and hot isostatic pressed Ti6A14V manufactured by electron beam melting. ,

Klingvall Ek, R. , Bäckström, M. & Rännar, L. (). Influence of the surface topography of additive manufactured Ti6A14V on fatigue and calculations of the stress concentration factor. ,

Doktorsavhandlingar

Bäckström, M. (1999). On Monitoring and Control of Machining Processes. Diss. Luleå : , 1999 (Doctoral Thesis : 1999:11)

Kapitel i böcker, del av antologier

Koptioug, A. & Bäckström, M. (2023). Body Part Surrogates for Medicine, Comfort and Safety Applications. I Advances in 3D Printing. Rijeka : IntechOpen.  

Carlsson, P. , Ainegren, M. , Tinnsten, M. , Sundström, D. , Esping, B. , Koptioug, A. & Bäckström, M. (2015). Cross-Country Ski. I The Engineering Approach to Winter Sports. Springer. S. 107-152.    

Bäckström, M. , Kuzmin, L. , Rännar, L. & Wiklund, H. (2009). Critical Factors Influencing Loss of Time after Shooting - A Case Study Performed During the 2008 IBU Biathlon World Championships. I The Impact of Technology on Sport III.. S. 33-37.

Konferensbidrag

Zullo, G. , Baldoin, E. , Koptyug, A. , Bäckström, M. & Petrone, N. (2023). Advances in the development of a instrumented head surrogate for brain injury investigation. I Convegno Nazionale di Bioingegneria.

Koptyug, A. , Botero Vega, C. A. , Sjöström, W. , Bäckström, M. , Rännar, L. & Tremsin, A. (2021). Electron Beam Melting: from Shape Freedom to Materials Properties Control at Macro- and Microscale. I Proceedings of the THERMEC 2020, Graz, Austria.. S. 755--759.  

Ainegren, M. , Michel, F. , Klauer, R. , Kopyug, A. , Bäckström, M. , Samuelsson, D. , Ahnesjö, M. & Litzenberger, S. (2020). A Study of Skin-Close Heat and Moisture with Different Types of Backpacks in Cycling. I The 13th Conference of the International Sports Engineering Association. (MDPI Proceedings)  

Koptyug, A. , Bäckström, M. & Olsson, V. (2020). Comparing the Performance of the Biathlon Rifles with Wooden and Titanium Frames. I Proceedings of The 13th Conference of the International Sports Engineering Association. (MDPI Proceedings)    

Botero, C. , Bäckström, M. , Rännar, L. , Roos, S. , Koptyug, A. , Åsvik, K. , Şelte, A. & Ramsperger, M. (2019). Additive Manufacturing of a cold work steel using Electron Beam Melting. I Proceedings of Conference:  Tooling 2019.

Koptyug, A. , Botero, C. , Sjöström, W. , Jimenez-Pique, E. , Şelte, A. , Asvik, K. , Rännar, L. & Bäckström, M. (2019). Steel-based functionally gradient materials obtained via Electron Beam Melting. I Proc. Alloys for Additive Manufacturing Symposium AAMS2019.

Petrone, N. , Carraro, G. , Dal Castello, S. , Broggio, L. , Koptioug, A. & Bäckström, M. (2018). A Novel Instrumented Human Head Surrogate For The Impact Evaluation Of Helmets. I Proceedings, Volume 2, ISEA 2018.. S. 269-    

Koptioug, A. , Bäckström, M. , Botero Vega, C. A. , Popov, V. & Chudinova, E. (2018). Developing new materials for Electron Beam Melting : experiences and challenges. Paper presented at the THERMEC'2018 International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, Paris, France July 8-13, 2018  

Botero Vega, C. A. , Jiménez-Piqué, E. , Roos, S. , Skoglund, P. , Koptioug, A. , Rännar, L. & Bäckström, M. (2018). Nanoindentation: a suitable tool in metal Additive Manufacturing. Paper presented at the Materials Science & Technology, MS&T 2018, October 14-18, Columbus, USA

Skoglund, P. , Botero Vega, C. A. , Koptioug, A. , Rännar, L. & Bäckström, M. (2018). Possibility of the “cold start” of the build in Electron Beam Melting. Paper presented at the Materials Science & Technology, MS&T 2018, October 14-18, Columbus, USA

Petrone, N. , Giacomin, M. , Koptioug, A. & Bäckström, M. (2018). Racing Wheels’ Effect on Drag/Side Forces Acting on a Cyclist at Sportstech-Miun Wind Tunnel. I Proceedings, Volume 2, ISEA 2018.. S. 210-    

Koptioug, A. , Bäckström, M. , Ainegren, M. & Nilsson, K. (2018). Studying Moisture Transport Trough "Active" Fabrics Using Humidity-Temperature Sensor Nodes. I Proceedings, Volume 2, ISEA 2018 : .. S. 230-    

Koptioug, A. , Rännar, L. , Botero Vega, C. A. , Bäckström, M. & Popov, V. (2018). Unique material compositions obtained by Electron beam melting of blended powders. I Euro PM2018 Proceedings.

Koptioug, A. , Bäckström, M. & Rännar, L. (2017). 3D-printing: a future “magic wand” for global manufacturing. How can we benefit from it today for sports and health care?. I Proceedings of the 5th International Congress on Sport Sciences Research and Technology Support, icSPORTS.

Koptyug, A. , Bäckstöm, M. & Petrone, N. (2017). Developing an Instrumented Physical Model of the Human Head for Studying Concussion Mechanisms. I Proceedingd of iSSs-  (International Ski Safety Society) : The Ski Trauma and Ski Safety Congress.

Klingvall Ek, R. , Bäckström, M. & Rännar, L. (2017). Fatigue properties of Ti-6Al-4V manufactured using electron beam melting. I Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition 2017. Brussels :

Koptyug, A. , Rännar, L. & Bäckström, M. (2017). New Materials for Additive Manufacturing in Metal: Back to Basics?. Paper presented at the Frontiers in Materials Processing Applications, Research and Technology, FiMPART-2017, Bordeaux, France, July 9-12, 2017

Bäckström, M. , Carlsson, P. , Danvind, J. , Koptioug, A. , Sundström, D. & Tinnsten, M. (2016). A New Wind Tunnel Facility Dedicated to Sports Technology Research and Development. I Procedia Engineering. (Procedia Engineering). S. 62--67.    

Koptyug, A. , Ainegren, M. , Bäckström, M. , Schieber, E. & Persson, J. (2016). Possibility of modern humidity sensor application in the studies ofmoisture transport through the sports and outdoor garments. I icSPORTS 2016 - Proceedings of the 4th International Congress on Sport Sciences Research and Technology Support. Portugal : (Scitepress Digital Library). S. 51--58.  

Rännar, L. , Koptyug, A. , Bäckström, M. & Jönsson, A. (2016). Water jet polishing of materials manufactured with electron beam melting technology. Paper presented at the World Powder Metallurgy Congress, Hamburg, Germany, 9-13 October, 2016

Sundström, D. , Bäckström, M. , Carlsson, P. & Tinnsten, M. (2015). A four compartment model on human exercise bioenergetics. I Procedia Engineering. (Procedia Engineering). S. 4--9.    

Sundström, D. , Bäckström, M. , Carlsson, P. & Tinnsten, M. (2015). Optimal distribution of power output and braking for corners in road cycling. Paper presented at the Science and Cycling, Utrecht 1-2 July 2015  

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2014). Gliding-induced ski vibrations : Approaching proper modeling. I Procedia Engineering. (Procedia Engineering). S. 539--544.    

Koptyug, A. , Rännar, L. & Bäckström, M. (2014). Multiscale surface structuring of the biomedical implants manufactured in Electron Beam Melting technology : Demands, advances and challenges. I Proceedings of the 5:th International Conference in Additive Technologies.. S. 37--42.

Koptyug, A. , Rännar, L. , Bäckström, M. & Langlet, r. (2013). Bulk Metallic Glass Manufacturing Using Electron Beam Melting. I Proceedings from Additive Manufacturing & 3D Printing, Nottingham, UK, July 2013. Nottingham, UK :

Cronskär, M. & Bäckström, M. (2013). Modeling of fractured clavicles and reconstruction plates using CAD, finite element analysis and real musculoskeletal forces input. I WIT Transactions on Biomedicine and Health. (WIT Transactions on Biomedicine and Health). S. 235--243.  

Bäckström, M. , Tinnsten, M. , Koptyug, A. , Rännar, L. , Carlsson, P. , Danvind, J. & Wiklund, H. (2013). Sports Technology Education at Mid Sweden University. I 6TH ASIA-PACIFIC CONGRESS ON SPORTS TECHNOLOGY (APCST). (Procedia Engineering). S. 214--219.    

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2013). Studies into the Mechanisms of the Cross-country Ski Vibrations and Possible Models of the Phenomenon. I 6TH ASIA-PACIFIC CONGRESS ON SPORTS TECHNOLOGY (APCST). (Procedia Engineering). S. 40--45.  

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2012). Cross-country Ski Vibrations : Loaded Vs Unloaded Skis. Paper presented at the 2nd International Congress on Science and Nordic Skiing, May 28 - 31, 2012, Vuokatti, Finland

Koptyug, A. , Rännar, L. , Backstrom, M. & Klingvall, R. (2012). Electron Beam Melting : Moving from Macro- to Micro- and Nanoscale. I Materials Science Forum. Switzerland : (Materials Science Forum). S. 532--537.  

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2012). Laboratory Setup for the Cross Country Ski Vibrations Measurements: Methodology and First Results. Paper presented at the 2nd International Congress on Science and Nordic Skiing, May 28 - 31, 2012, Vuokatti, Finland

Bäckström, M. , Rännar, L. & Kuzmin, L. (2011). Influencing factors on time-loss after shooting in Biathlon. I Moderns systems for application in Biathlon. Omck : . S. 154--159.

Bäckström, M. , Dahlén, L. , Ebrahimzadeh, R. & Rännar, L. (2009). Taylor Made Titanium Insoles in Alpine Ski Boots. I Asia-Pasific Congress on Sports Technology.

Cronskär, M. , Rännar, L. , Bäckström, M. & Koptioug, A. (2008). Application of electron beam melting to titanium hip stem Implants. Paper presented at the International Conference on Additive Technologies

Bäckstöm, M. , Dahlen, L. & Tinnsten, M. (2008). Essential ski characteristics for cross-country skis performance. I ENGINEERING OF SPORT 7, VOL 2. Paris : . S. 543--549.  

Johansson, J. & Bäckström, M. (2007). Collaboration - a Key Factor for the Application of Discrete Event Simulation in Real World Manufacturing Industry.

Bäckström, M. & Wiklund, H. (2003). QFD as a Tool to Improve Quality Control in a Complex Manufacturing Environment. I Proceedings of The Sixth Quality Management and Organisational Development Conference (QMOD 2003) Paris, France 1-3 october 2003 - Paris.

Bäckström, M. & Wiklund, H. (2000). Integration of real-time quality control and process monitoring. I The 33rd CIRP International Seminar on Manufacturing Systems : the manufacturing systems in its human context : a tool to extend the global welfare : 5-7 June, 2000, Stockholm, Sweden : proceedings. : CIRP International Seminar on Manufacturing Systems (33 : 2000 : Stockholm). Sth. : . S. 438-

Bäckström, M. & Wiklund, H. (2000). On the application of quality function deployment in integrated supervisory process control. I IMechE conference transactions.. S. 531--540.

Cai, D. Q. , Xie, M. , Goh, T. N. , Wiklund, H. & Bäckström, M. (1999). A study of control chart for adjusted processes. I The 26th International Conference on Computers & Industrial Engineering (the 26th C & IE) : December 15-17, 1999, Melbourne, Australia.. S. 443--447.

Bäckström, M. & Wiklund, H. (1999). An approach to integrated process monitoring and quality control of advanced machining. I Life cycle approaches to production systems : management, control, and supervision; preprints; ASI '99; Advanced Summer Institute '99, ICIMS-NOE; September 22 - 24, 1999, Leuven, Belgium. Leuven, Belgien : . S. 150-

Bäckström, M. & Wiklund, H. (1999). Deployment of quality and productivity requirements in integrated process control. I Proceedings of The 26th International Conference on Computers & Industrial Engineering, December 15-17, 1999, Melbourne, Australia.. S. 70--74.

Bäckström, M. & Wiklund, H. (1998). A step towards integrated supervisory control of complex machining processes. I Changing the ways we work : shaping the ICT-solutions for the next century : proceedings of the Conference on Integration in Manufacturing, Göteborg, Sweden, 6-8 October 1998. Amsterdam : (Advances in design and manufacturing). S. 817-

Licentiatavhandlingar

Bäckström, M. (1991). Performance of Adaptive Control : Significant Features. Lic.-avh. Linköping : Univ., 1991 (Linköping studies in science and technology. Thesis : 299)

Manuskript

Bäckström, M. & Wiklund, H. Integration of real-time quality control and process monitoring.

Bäckström, M. & Wiklund, H. Integration of real-time quality control and process monitoring.

Cronskär, M. , Rännar, L. , Bäckström, M. , Nilsson, K. & Samuelsson, B. Patient-specific bone plates for clavicle fractures : Design, manufacturing and strength analysis.

Patent

Bäckström, M. & Koptyug, A. (2016). Method and system for generating a driver support product for a racing driver .

Rapporter

Bäckström, M. & Wiklund, H. (1999). On the use of neural networks and statistical methods in the integrated supervisory process control concept.

Sidan uppdaterades 2023-09-21